OSDir


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

dual-boot time issue


-----Original Message-----
From: ubuntu-users [mailto:ubuntu-users-bounces at lists.ubuntu.com] On Behalf Of Colin Watson
Sent: dinsdag 12 juni 2018 15:02
To: ubuntu-users at lists.ubuntu.com
Subject: Re: dual-boot time issue

On Tue, Jun 12, 2018 at 11:45:54AM +0000, J.Witvliet at mindef.nl wrote:
> The general issue arrises when dual-booting:
> Ubuntu_18.04 uses UTC, derived from NTP Windows uses Local Time,
> derived from hwclock.
>
> Normally the two can co-exists together, except, when stopping Ubuntu, System-D writes its time back to the hwclock.
> No big deal for Ubuntu (as it will use ntp), but a source of irritation under Windows.
>
> I do know several suggestions, like:
>
> a)      Make Windows10 use UTC instead of local time.
> This would solve everything once and for all FOR ME, but not achievable for others.
>
>
> b)      Make Ubuntu_18.04 use local time, with: "timedatectl set-local-rtc 1 --adjust-system-clock"
> However, I'm about to switch to Kerberos for several services, so I must use a reliable source for time.

b) seems like the proper fix, if you don't want to (or can't) reconfigure Windows.  systemd or anything else writing to the hardware clock isn't the problem in and of itself; it just needs to make sure to apply the correct offset, and that's what "timedatectl set-local-rtc 1"
does.

I don't see how this is related to using a reliable source for time.
You should probably omit the --adjust-system-clock option, since you don't need to synchronise the system clock from the hardware clock; but once you've run that timedatectl command once, the system should be configured to do the right thing when writing to the hardware clock from then on.

=============================================================================
Option a) should be better, but is beyond my reach (especially for other systems)
Option B) seems nice, but when using Kerberos, you need a steady and reliable time source.

For Ubuntu there is no problem, it works well with our own time-source,
But the problem arises when people shuts down and subsequently boots windows (yeah, I know, bad move altogether, but such is life)
So during shutdown I think the system should either:
- Not write to the hwclock at all, or,
- write the converted UTC-2-LTC (to keep the win-users happy)

Up to now, I failed to see a system option to influence this behavior.
(could I mislead the system by using the package: "fake-hwclock", or would I break other parts?)

HtH, Hans

Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.