osdir.com


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [telemetry][ceilometer][gnocchi] How to configure aggregate for cpu_util or calculate from metrics


Hello Bernd, Hello Lingxian,


+1


You are not alone in your fruitless endeavor. Sadly, I can not come up with a solution.

We are stuck at the same point.

Maybe some day a dedicated member of the OpenStack community give the ceilometer guys a push to explain their service.
For us, also using Stein, it is in the state of "not production ready".

Cheers,

Ralf T.
________________________________
Von: Bernd Bausch <berndbausch at gmail.com>
Gesendet: Donnerstag, 1. August 2019 03:16:25
An: Lingxian Kong <anlin.kong at gmail.com>
Cc: openstack-discuss <openstack-discuss at lists.openstack.org>
Betreff: Re: [telemetry][ceilometer][gnocchi] How to configure aggregate for cpu_util or calculate from metrics


Lingxian,

Thanks for "bumping" my request and keeping it alive. The reason I need an answer: I am updating courseware to Stein that includes autoscaling based on CPU and disk I/O rates. Looks like I am "cutting edge" :)

I don't think the problem is in the Gnocchi camp, but rather Ceilometer. To store rates of measures in z, the following is needed:

  *   A metric. Raw measures are sent to the metric.
  *   An archive policy. The metric has an archive policy.
  *   The archive policy includes one or more rate aggregates

My cloud has archive policies with rate aggregates, but the question is about the first bullet: How can I configure Ceilometer so that it creates the corresponding metrics and sends measures to them. In other words, how is Ceilometer's output connected to my archive policy. From my experience, just adding the archive policy to Ceilometer's publishers is not sufficient.

Ceilometer's source code includes .../publisher/data/gnocchi_resources.yaml, which might well be the place where this can be configured. I am not sure how to do it though, and this file is not documented. I can read the source, but my developer skills are insufficient for understanding how everything fits together.

Bernd

On 8/1/2019 9:01 AM, Lingxian Kong wrote:
Hi Bernd,

There were a lot of people asked the same question before, unfortunately, I don't know the answer either(we are still using an old version of Ceilometer). The original cpu_util support has been removed from Ceilometer in favor of Gnocchi, but AFAIK, there is no doc in Gnocchi mentioned how to achieve the same thing and no clear answer from the Gnocchi maintainers.

It'd be much appreciated if you could find the answer in the end, or there will be someone who has the already solved the issue.

Best regards,
Lingxian Kong
Catalyst Cloud


On Wed, Jul 31, 2019 at 1:28 PM Bernd Bausch <berndbausch at gmail.com<mailto:berndbausch at gmail.com>> wrote:

The message at the end of this email is some three months old. I have the same problem. The question is: How to use the new rate metrics in Gnocchi. I am using a Stein Devstack for my tests.

For example, I need the CPU rate, formerly named cpu_util. I created a new archive policy that uses rate:mean aggregation and has a 1 minute granularity:

$ gnocchi archive-policy show ceilometer-medium-rate
+---------------------+------------------------------------------------------------------+
| Field               | Value                                                            |
+---------------------+------------------------------------------------------------------+
| aggregation_methods | rate:mean, mean                                                  |
| back_window         | 0                                                                |
| definition          | - points: 10080, granularity: 0:01:00, timespan: 7 days, 0:00:00 |
| name                | ceilometer-medium-rate                                           |
+---------------------+------------------------------------------------------------------+

I added the new policy to the publishers in pipeline.yaml:

$ tail -n5 /etc/ceilometer/pipeline.yaml
sinks:
    - name: meter_sink
      publishers:
          - gnocchi://?archive_policy=medium&filter_project=gnocchi_swift
          - gnocchi://?archive_policy=ceilometer-medium-rate&filter_project=gnocchi_swift

After restarting all of Ceilometer, my hope was that the CPU rate would magically appear in the metric list. But no: All metrics are linked to archive policy medium, and looking at the details of an instance, I don't detect anything rate-related:

$ gnocchi resource show ae3659d6-8998-44ae-a494-5248adbebe11
+-----------------------+---------------------------------------------------------------------+
| Field                 | Value                                                               |
+-----------------------+---------------------------------------------------------------------+
...
| metrics               | compute.instance.booting.time: 76fac1f5-962e-4ff2-8790-1f497c99c17d |
|                       | cpu: af930d9a-a218-4230-b729-fee7e3796944                           |
|                       | disk.ephemeral.size: 0e838da3-f78f-46bf-aefb-aeddf5ff3a80           |
|                       | disk.root.size: 5b971bbf-e0de-4e23-ba50-a4a9bf7dfe6e                |
|                       | memory.resident: 09efd98d-c848-4379-ad89-f46ec526c183               |
|                       | memory.swap.in<https://urldefense.proofpoint.com/v2/url?u=http-3A__memory.swap.in&d=DwMDaQ&c=vo2ie5TPcLdcgWuLVH4y8lsbGPqIayH3XbK3gK82Oco&r=WXex93lsaiQ-z7CeZkHv93lzt4fdCRIPXloSPQEU7CM&m=pnr97rQYDOFbG5UeNvvK1DDoP0YecUmqLwRt4SI4wOU&s=wDnZesKE356cMfbQrJMuwYwdEof7ULmQOFQgqE31umo&e=>: 1bb4bb3c-e40a-4810-997a-295b2fe2d5eb                |
|                       | memory.swap.out: 4d012697-1d89-4794-af29-61c01c925bb4               |
|                       | memory.usage: 93eab625-0def-4780-9310-eceff46aab7b                  |
|                       | memory: ea8f2152-09bd-4aac-bea5-fa8d4e72bbb1                        |
|                       | vcpus: e1c5acaf-1b10-4d34-98b5-3ad16de57a98                         |
| original_resource_id  | ae3659d6-8998-44ae-a494-5248adbebe11                                |
...

| type                  | instance                                                            |
| user_id               | a9c935f52e5540fc9befae7f91b4b3ae                                    |
+-----------------------+---------------------------------------------------------------------+

Obviously, I am missing something. Where is the missing link? What do I have to do to get CPU usage rates? Do I have to create metrics? Do I have to ask Ceilometer to create metrics? How?

Right now, no instructions seem to exist at all. If that is correct, I would be happy to write documentation once I understand how it works.

Thanks a lot.

Bernd

On 5/10/2019 3:49 PM, info at dantalion.nl<mailto:info at dantalion.nl> wrote:

Hello,

I am working on Watcher and we are currently changing how metrics are
retrieved from different datasources such as Monasca or Gnocchi. Because
of this major overhaul I would like to validate that everything is
working correctly.

Almost all of the optimization strategies in Watcher require the cpu
utilization of an instance as metric but with newer versions of
Ceilometer this has become unavailable.

On IRC I received the information that Gnocchi could be used to
configure an aggregate and this aggregate would then report cpu
utilization, however, I have been unable to find documentation on how to
achieve this.

I was also notified that cpu_util is something that could be computed
from other metrics. When reading
https://docs.openstack.org/ceilometer/rocky/admin/telemetry-measurements.html#openstack-compute<https://urldefense.proofpoint.com/v2/url?u=https-3A__docs.openstack.org_ceilometer_rocky_admin_telemetry-2Dmeasurements.html-23openstack-2Dcompute&d=DwMDaQ&c=vo2ie5TPcLdcgWuLVH4y8lsbGPqIayH3XbK3gK82Oco&r=WXex93lsaiQ-z7CeZkHv93lzt4fdCRIPXloSPQEU7CM&m=pnr97rQYDOFbG5UeNvvK1DDoP0YecUmqLwRt4SI4wOU&s=-ncji0Wl7WScsqBfumudi0ot_et_UIRfjh2c464FYWY&e=>
the documentation seems to agree on this as it states that cpu_util is
measured by using a 'rate of change' transformer. But I have not been
able to find how this can be computed.

I was hoping someone could spare the time to provide documentation or
information on how this currently is best achieved.

Kind Regards,
Corne Lukken (Dantali0n)


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20190801/ba9c2b47/attachment-0001.html>