osdir.com


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[queens][nova] nova host-evacuate errot


Jay,  for recovering vm state use the command nova reset-state....

nova help reset-state to check the command requested parameters.

Ad far as evacuation la concerned, how many compute nodes do gli have ?
Instance live migration works?
Are gli using shared cinder storage?
Ignazio

Il Gio 11 Lug 2019 20:51 Jay See <jayachander.it at gmail.com> ha scritto:

> Thanks for explanation Ignazio.
>
> I have tried same same by trying to put the compute node on a failure
> (echo 'c' > /proc/sysrq-trigger ). Compute node was stuck and I was not
> able connect to it.
> All the VMs are now in Error state.
>
> Running the host-evacaute was successful on controller node, but now I am
> not able to use the VMs. Because they are all in error state now.
>
> root at h004:~$ nova host-evacuate h017
>
> +--------------------------------------+-------------------+---------------+
> | Server UUID                          | Evacuate Accepted | Error Message
> |
>
> +--------------------------------------+-------------------+---------------+
> | f3545f7d-b85e-49ee-b407-333a4c5b5ab9 | True              |
> |
> | 9094494b-cfa3-459b-8d51-d9aae0ea9636 | True              |
> |
> | abe7075b-ac22-4168-bf3d-d302ba37d80e | True              |
> |
> | c9919371-5f2e-4155-a01a-5f41d9c8b0e7 | True              |
> |
> | ffd983bb-851e-4314-9d1d-375303c278f3 | True              |
> |
>
> +--------------------------------------+-------------------+---------------+
>
> Now I have restarted the compute node manually , now I am able to connect
> to the compute node but VMs are still in Error state.
> 1. Any ideas, how to recover the VMs?
> 2. Are there any other methods to evacuate, as this method seems to be not
> working in mitaka version.
>
> ~Jay.
>
> On Thu, Jul 11, 2019 at 1:33 PM Ignazio Cassano <ignaziocassano at gmail.com>
> wrote:
>
>> Ok Jay,
>> let me to describe my environment.
>> I have an openstack made up of 3 controllers nodes ad several compute
>> nodes.
>> The controller nodes services are controlled by pacemaker and the compute
>> nodes services are controlled by remote pacemaker.
>> My hardware is Dell so I am using ipmi fencing device .
>> I wrote a service controlled by pacemaker:
>> this service controls if a compude node fails and for avoiding split
>> brains if a compute node does nod respond on the management network and on
>> storage network the stonith poweroff the node and then execute a nova
>> host-evacuate.
>>
>> Anycase to have a simulation before writing the service I described above
>> you can do as follows:
>>
>> connect on one compute node where some virtual machines are running
>> run the command: echo 'c' > /proc/sysrq-trigger (it stops immediately the
>> node like in case of failure)
>> On a controller node run:  nova host-evacuate "name of failed compute
>> node"
>> Instances running on the failed compute node should be restarted on
>> another compute node
>>
>>
>> Ignazio
>>
>> Il giorno gio 11 lug 2019 alle ore 11:57 Jay See <
>> jayachander.it at gmail.com> ha scritto:
>>
>>> Hi ,
>>>
>>> I have tried on a failed compute node which is in power off state now.
>>> I have tried on a running compute node, no errors. But nothing happens.
>>> On running compute node - Disabled the compute service and tried
>>> migration also.
>>>
>>> May be I might have not followed proper steps. Just wanted to know the
>>> steps you have followed. Otherwise, I was planning to manual migration also
>>> if possible.
>>> ~Jay.
>>>
>>> On Thu, Jul 11, 2019 at 11:52 AM Ignazio Cassano <
>>> ignaziocassano at gmail.com> wrote:
>>>
>>>> Hi Jay,
>>>> would you like to evacuate a failed compute node or evacuate a running
>>>> compute node ?
>>>>
>>>> Ignazio
>>>>
>>>> Il giorno gio 11 lug 2019 alle ore 11:48 Jay See <
>>>> jayachander.it at gmail.com> ha scritto:
>>>>
>>>>> Hi Ignazio,
>>>>>
>>>>> I am trying to evacuate the compute host on older version (mitaka).
>>>>> Could please share the process you followed. I am not able to succeed
>>>>> with openstack live-migration fails with error message (this is known issue
>>>>> in older versions) and nova live-ligration - nothing happens even after
>>>>> initiating VM migration. It is almost 4 days.
>>>>>
>>>>> ~Jay.
>>>>>
>>>>> On Thu, Jul 11, 2019 at 11:31 AM Ignazio Cassano <
>>>>> ignaziocassano at gmail.com> wrote:
>>>>>
>>>>>> I am sorry.
>>>>>> For simulating an host crash I used a wrong procedure.
>>>>>> Using  "echo 'c' > /proc/sysrq-trigger" all work fine
>>>>>>
>>>>>> Il giorno gio 11 lug 2019 alle ore 11:01 Ignazio Cassano <
>>>>>> ignaziocassano at gmail.com> ha scritto:
>>>>>>
>>>>>>> Hello All,
>>>>>>> on ocata when I  poweroff a node with active instance , doing a nova
>>>>>>> host-evacuate works  fine
>>>>>>> and instances are restartd on an active node.
>>>>>>> On queens it does non evacuate instances but nova-api reports for
>>>>>>> each instance the following:
>>>>>>>
>>>>>>> 2019-07-11 10:19:54.745 13811 INFO nova.api.openstack.wsgi
>>>>>>> [req-daad0a7d-87ce-41bf-b096-a70fc306db5c 0c7a2d6006614fe2b3e81e47377dd2a9
>>>>>>> c26f8d35f85547c4add392a221af1aab - default default] HTTP exception thrown:
>>>>>>> Cannot 'evacuate' instance e8485a5e-3623-4184-bcce-cafd56fa60b3 while it is
>>>>>>> in task_state powering-off
>>>>>>>
>>>>>>> So it poweroff all instance on the failed node but does not start
>>>>>>> them on active nodes
>>>>>>>
>>>>>>> What is changed ?
>>>>>>> Ignazio
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>> --
>>>>> â??
>>>>> P  *SAVE PAPER â?? Please do not print this e-mail unless absolutely
>>>>> necessary.*
>>>>>
>>>>
>>>
>>> --
>>> â??
>>> P  *SAVE PAPER â?? Please do not print this e-mail unless absolutely
>>> necessary.*
>>>
>>
>
> --
> â??
> P  *SAVE PAPER â?? Please do not print this e-mail unless absolutely
> necessary.*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20190712/a1dd503c/attachment-0001.html>