Re: How to assign 2 IPs

U can create a custom script to run a bootup..

enter "ifconfig ethx:x " and then the settings.  for EHT0 to assign a second
IP enter:

ifconfig eth0:0 ipaddr netmask .....

This will give the NIC a second IP address.  You can add more then one as
well  IE:  eth0:1 eth0:2 and so on.

Hope this helps.


----- Original Message -----
From: "Caio James" <caio@xxxxxxxxxx>
To: <webadmin-list@xxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, June 27, 2002 3:24 PM
Subject: How to assign 2 IPs


> I need to assign 2 IP addresses to  1 NIC card. These are on different
> subnets and have different gateways (routers). Is this possible to do in
> webmin? I only found a place for one gateway. If not, can someone tell me
> how to do this in linux? rh7.2
>
> Thanks,
>
> Caio
>
> [---------------------------------------------------]
>  Caio James
>  PHONE: (888) 498-8234         Technology Consultant
>  FAX:   (888) 498-8233                        Intric
>  WEB:   http://intric.com              704 Natoma St
>  EMAIL: caio@xxxxxxxxxx             Folsom, CA 95630
> [---------------------------------------------------]
>
>
>
> -------------------------------------------------------
> Sponsored by:
> ThinkGeek at http://www.ThinkGeek.com/
> -
> Forwarded by the Webmin mailing list at
webadmin-list@xxxxxxxxxxxxxxxxxxxxx
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>
>




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Bringing you mounds of caffeinated joy.
http://thinkgeek.com/sf
-
Forwarded by the Webmin mailing list at webadmin-list@xxxxxxxxxxxxxxxxxxxxx
To remove yourself from this list, go to
http://lists.sourceforge.net/lists/listinfo/webadmin-list