Re: km - cvs - make error

Dnia wtorek, 4 lipca 2006 16:57, Antti Ajanki napisał:
> AFAIK the errors avview prints out are non-fatal, i.e. it should work
> anyway.
>
> > Initializing LIRC.
> > avview: could not connect to socket
> > avview: No such file or directory
> > Can't initialize LIRC: error opening socket.
>
> These just means that it didn't find remote control.
I don't have lirc


> > v4l device does not support YUV422
> > Device "Labtec Webcam Pro" located at "/dev/video1" does not support any
> > format AVview understands.
>
> This denotes that avview can't capture from your webcam, but that's just
> capture. Viewing TV should be possible even if no capture devices are
> found. Besides, the next line probably means that it did find the km
I disconnect my webcam and run avview again
- no picture

 - important information - mayby
---------------------------------
changes in km.c  ( thanks!  Marcin ) made by Marcin ( developer gatos )
- my radeon not supported by Gatos :(
------------------------------------------
#ifndef PCI_DEVICE_ID_ATI_RADEON_RD
#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147
#endif

#ifndef PCI_DEVICE_ID_ATI_RADEON_RV <-- add
#define PCI_DEVICE_ID_ATI_RADEON_RV 0x5961 <-- add
#endif <-- add

/*-------------------------------------------------------------------------*/
    /* Radeons */
        {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_RD,
         PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON},
        {PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_RV, <-- add
         PCI_ANY_ID, PCI_ANY_ID, 0, 0, HARDWARE_RADEON}, <-- add
    /* Radeon200 i.e. 8500 */
----------
$ start_avview
libzvbi available export modules:
        HTML:keyword "html" mimetype "text/html" extension "html,htm"
        PNG:keyword "png" mimetype "image/png" extension "png"
        PPM:keyword "ppm" mimetype "image/x-portable-pixmap" extension "ppm"
        Text:keyword "text" mimetype "text/plain" extension "txt"
        VTX:keyword "vtx" mimetype "application/videotext" extension "vtx"
Initializing LIRC.
avview: could not connect to socket
avview: No such file or directory
Can't initialize LIRC: error opening socket.
NUM_ADAPTORS=1
Adaptor 0: ATI Radeon Video Overlay
                type input video image
                ports 73
73 ATI Radeon Video Overlay
master=.controlwin row=1 column=0
Looking for km device that corresponds to PCI:01:00.0
km_devs=control0
read line=+STATUS
read line=DEVICE_ID=0000:01:00.0
read line=LOCATION_ID=PCI:0000:01:00.0
read line=INSTANCE_ID=KM_DEVICE:0
read line=VSYNC_COUNT=40598
read line=VBLANK_COUNT=0
read line=VLINE_COUNT=1
read line=V4L_DEVICE=0
read line=VIDEO_STREAM_ACTIVE=0
read line=VIDEO_STREAM_DATA_UNIT=4294967295
read line=VIDEO_STREAM_INFO_DATA_UNIT=4294967295
read line=VBI_DEVICE=224
read line=VBI_STREAM_DATA_UNIT=4294967295
read line=VBI_STREAM_INFO_DATA_UNIT=4294967295
read line=VBI_STREAM_ACTIVE=0
read line=+END_STATUS
master=.controlwin row=1 column=0
Current picture parameters: depth=16 palette=7
Current picture parameters: depth=16 palette=7
-------------
dmesg
------------
Kmultimedia API module version alpha-6.0 loaded
Kmultimedia module version alpha-6.0 loaded
Page size is 4096 sizeof(bm_list_descriptor)=16 sizeof(KM_STRUCT)=732
km: probing 0000:01:00.0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
km: using irq 11
Register aperture is 0xe9000000 0x00010000
kms variables: reg_aperture=0xd0ea0000
km: DMA_GUI_STATUS=0x00000002 entries=2
sizeof(kmfl_template)=780 sizeof(KM_FIELD)=52
Device 0000:01:00.0 (0x1002:0x5961) corresponds to /dev/video0
kms variables: reg_aperture=d0ea0000
--------------
after run avview
------------------
dmesg
-----------
lag=0x80000001
km: GUI_DMA queue (size=10) is full first=1 last=0 flag=0x80000001
-----cut 231 lines - the same -----------------------------------
km: GUI_DMA queue (size=10) is full first=1 last=0 flag=0x80000001
Stopping GUIDMA queue
km: GUI_DMA_QUEUE abort stalled
km: closed stream, 260 buffers captured
Purging transfer queue
----------------

> Which version of X.org are you using? 6.9.0 or newer is recommended.
- xorg-6.9.0-54.pclo2005.mde
- Build Date: Saturday 13 may 2006 22:53:21
- Packager    : Thac&Zé <mde-FLENM3bZpOLYtjvyW6yDsg@xxxxxxxxxxxxxxxx>

> Also, 
> check Xorg.log for errors.
- no errors

Antti Ajanki - thanks for You help and more please
regards

Xorg.0.log.tar.bz2
Description: application/tbz

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________
Gatos-devel mailing list
Gatos-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@xxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/gatos-devel