Re: Was: Radeon 8500 + UT2003 only at 16bit

On Thu, 17 Jul 2003 18:24:30 -0400
"Andrew J. Montalenti" <pixelmonkey@xxxxxxxxxxxxxxx> wrote:
Sure Andrew , I'll be glad to answer your questions.

4) I answer to the 4 before the others because I think that is better that I 
first clear explain what happens. I start , UT2003 , all seems normal at the 
starting screen , appears the Nvidia Logo, now is a Lottery , it can freeze 
when the man destroy the Nvidia Logo or it can go ahead , let's suppose that 
this time it goes ahead. I start my game ( the menu is normal , apart a little 
glitch in the mouse pointer , but nothing that needs care) , it seems all 
normal . from the moment when I start the to the freeze I have about 30 
seconds, not more. For more details read the answers below 

1) X is running at the resolution of 1280x1024@24bit FrameBufferDepth 32bit 
(but I've tried also 640x480@16 , with this resolution the system have freeze a 
bit of time later than the usually time.Instead of 30 seconds it freeze after 
few minutes. If I increase the AGPAperture size (by put "Option "AGPSize" "64"" 
in my /etc/X11/XF86Config) the time inceases more , but at the end (early or 
later)it always freeze.

3) No , for now UT2003 is the only OpenGL App that freeze my system. Anyway 
I've installed my LinuxFromScratch system from short time , and I have tested 
only few applications , for now I've tried only Wolfenstein:Enemy Territory 
(that works ok) , Quake3 Arena (that works ok) , UT2003 (That Doesn't work ok) 
and ,of course, glxgears (that works ok :D )

5) I don't use "SSH" , so I can't test it (and now I haven't a terminal with 
doing the test , anyway the system doesn't seems to respond to my commands , 
but sometimes I've tried to reboot the system cleanly by pressing CTRL+ALT+BKSP 
and then CTRL+ALT+CANC, the HD starts to work, and the sound of the game , that 
remained after the freeze, stops , but the system doesn't reboot anyway :/ )

6) My system is composed by : Athlon 2400+ (not overclocked ) MSI KT4 Ultra 
(Via KT400) , and my Hercules 3D Prophet FDX 8500LE 

7) here my lspci -vvvxx
   
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
        Subsystem: VIA Technologies, Inc.: Unknown device 0000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 8
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- 
Rate=x4
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 89 31 06 00 30 22 00 00 00 06 00 08 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: dfe00000-dfefffff
        Prefetchable memory behind bridge: cfd00000-dfcfffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 68 b1 07 01 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c0 c0 00 00
20: e0 df e0 df d0 cf c0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00

00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at ec00 [size=256]
        Region 1: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 40 00 00
10: 01 ec 00 00 00 ff ff df 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40

00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
        Subsystem: Micro-star International Co Ltd: Unknown device 5900
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at e800 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 40 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 00 59
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 01 02 18

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
        Subsystem: VIA Technologies, Inc.: Unknown device 0000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master 
IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 255
        Region 4: I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 
8500 LE] (prog-if 00 [VGA])
        Subsystem: Hercules: Unknown device 0002
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min), cache line size 08
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at c800 [size=256]
        Region 2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at dfec0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- 
Rate=x4
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 4c 51 87 00 b0 02 00 00 00 03 08 40 00 00
10: 08 00 00 d0 01 c8 00 00 00 00 ef df 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 81 16 02 00
30: 00 00 ec df 58 00 00 00 00 00 00 00 0b 01 08 00



Thats all folks ;) I hope that this would be useful to you. If u need something 
else please tell

Bye
Marcelo



> Marcello,
> 
> I'm dealing with my own DRI bugs with the Radeon 8500, and I'm just
> wondering if you can try a couple things for me/answer a few questions.  It
> would help me see if there is a link between our problems:
> 
> (1) At what resolution/depth is X running?
> 
> (2) At what resolution/depth are you trying to run Unreal Tournament?
> 
> (3) Do other OpenGL/DRI-enabled programs cause this system freeze, or just
> UT?  Have you tried Tuxracer, or something like that?
> 
> (4) Is the system lockup a "black screen of death" when the program starts
> up?  i.e. do you run UT, wait a few seconds, nothing happens, and the system
> is totally frozen (CTRL+ALT+BKSP doesn't work)?
> 
> (5) Have you tried ssh'ing into your system in this frozen state?
> 
> (6) What is your motherboard/chipset?
> 
> (7) What is your output of lspci?
> 
> Thanks
> -Andrew
> 
> ----- Original Message ----- 
> From: "Marci" <voloterreno@xxxxxx>
> To: <dri-users@xxxxxxxxxxxxxxxxxxxxx>
> Sent: Thursday, July 17, 2003 7:54 AM
> Subject: Re: [Dri-users] Was: Radeon 8500 + UT2003 only at 16bit
> 
> 
> > On Thu, 17 Jul 2003 12:41:54 +0200 (CEST)
> > Korosi Akos <korosiakos@xxxxxxxxxxx> wrote:
> >
> > Yes , here my XF86Config , but... I have to make a correction, my system
> freeze uo at 16bit too , but if I place bpp at 16 and AGPSize at 64 it takes
> more time to freeze . It seems a Memory Leak , and 16 bit textures and more
> AGP memory only increase the time before the freeze . I've talked to early
> :/
> >
> > Bye
> >
> > Marcello
> >
> >
> > > Hi Marcello!
> > >
> > > You posted a mail here, that your 8500 freezes up your
> > > system at 24 bpp
> > > with ut2003 but at 16 bpp it won't freeze.
> > > My 8500 freeze up my system even in 16 bpp with ut2003demo...
> > >
> > > Could you send me your XF86Config file and your settings in
> > > ut2003?
> > >
> > > Thanks in advace,
> > > Akos
> > >
> > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: VM Ware
> > > With VMware you can run multiple operating systems on a single machine.
> > > WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> > > same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> > > _______________________________________________
> > > Dri-users mailing list
> > > Dri-users@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.sourceforge.net/lists/listinfo/dri-users
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: VM Ware
> > With VMware you can run multiple operating systems on a single machine.
> > WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> > same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> > _______________________________________________
> > Dri-users mailing list
> > Dri-users@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.sourceforge.net/lists/listinfo/dri-users
> >
> 
> 
> 




-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0