Radeon 8500 XFree 4.3.0 dri

----- Original Message -----
From: "Vicchius" <vicchius@xxxxxxxxx>
To: "Alex Deucher" <agd5f@xxxxxxxxx>
Sent: Wednesday, July 16, 2003 1:23 PM
Subject: Re: [Dri-users] Radeon 8500 XFree 4.3.0 dri


>
> ----- Original Message -----
> From: "Alex Deucher" <agd5f@xxxxxxxxx>
> To: "Vicchius" <vicchius@xxxxxxxxx>; <dri-users@xxxxxxxxxxxxxxxxxxxxx>
> Sent: Tuesday, July 15, 2003 11:07 PM
> Subject: Re: [Dri-users] Radeon 8500 XFree 4.3.0 dri
>
>
> > radeon (r100) and r200 have very different 3D engines.  you must have
> > somehow not compiled or not installed the r200 drm.  once you
> > find/build that it should work.
>
> hmm I'm quite sure to have followed the same steps I had followed the
first
> time I built XFree4.3, but maybe I'm wrong :P
> Just in case, this is the host.def file that I used this time to build
> XFree86 (I have put a blank line before the section with Dri's #define)
>
> #define
> DefaultGcc2i386Opt -s -O3 -fomit-frame-pointer -march=i686 -mcpu=i686
> #define GccWarningOptions -w -pipe
> #define TermcapLibrary -lncurses
> #define HasZlib YES
> #define HasNCurses YES
> #define HasMTRRSupport YES
> #define HasMMXSupport YES
> #define HasKatmaiSupport YES
> #define Has3DNowSupport YES
> #define XInputDrivers mouse void
> #define XprtServer YES
> #define XnestServer YES
> #define XAppLoadDir EtcX11Directory/app-defaults
> #define VarLibDir /var/lib
> #define XFree86Devel NO
> #define FSUseSyslog YES
> #define ThreadedX YES
> #define HasPam NO
> #define SystemManDirectory /usr/share/man
> #define ForceNormalLib YES
> #define BuildSpecsDocs NO
>
> #define XF86CardDrivers glint tga vmware chips apm GlideDriver fbdev i128
> ati AgpGartDrivers DevelDrivers ark cyrix siliconmotion vesa vga \
> XF86OSCardDrivers XF86ExtraCardDrivers
> #define BuildXF86DRI YES
> #define BuildXF86DRM YES
> #define DriDrivers gamma r128 radeon
>
> #define BuildFontServer YES
> #define SharedLibFont YES
> #define CompressAllFonts YES
> #define GzipFontCompression YES
> #define InstallXinitConfig YES
> #define InstallXdmConfig YES
> #define InstallFSConfig YES
> #define HasLibpng YES
> #define DefaultFontPath \
>
$(FONTDIR)/misc/,$(FONTDIR)/75dpi/,$(FONTDIR)/100dpi/,$(FONTDIR)/Type1,$(FON
> TDIR)/local,$(FONTDIR)/TrueType,$(FONTDIR)/CID,$(FONTDIR)/Speedo
> #define MesaUseKatmai YES
> #define MesaUse3Dnow YES
>
> As you can see, I have built the gamma, r128 and radeon drivers, which,
> according to the howto I have read (sorry, do not remember where I found
> this "howto" which I think it was an unofficial one, but again it worked
> last time...), are the only ones needed for users with an ati card. Maybe
it
> should be added a "r200" to that line?
> Thanks
>
> Vicchius
>
>



-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0