Re: HTPC hardware

Some boards (most that ive seen) that have onboard SATA, support SATA raid.
With the WD 10k Raptors hovering just over $100, two of them would give you
far better performance than 7200k ide's. Though you will lose a fair amount
of disk space. Just depends what you want more, space or performance. My new
comp that im building is going to be sata raid 0, just picking up a piece at
a time. Should have it up and going by the first of the year unless MGE
decides to put me out of my house...


----- Original Message -----
From: "brad" <brad-qbzRHexoxtva5GuxC09GrQ@xxxxxxxxxxxxxxxx>
To: "Jason Clinton" <me-dkDMt+y20MhQSYf287kT3w@xxxxxxxxxxxxxxxx>
Cc: <kclug-WZbs9ZYJ0ybMCB+qhRxoJOTW4wlIGRCZ@xxxxxxxxxxxxxxxx>
Sent: Tuesday, November 25, 2003 4:28 PM
Subject: Re: HTPC hardware


> On Tue, 2003-11-25 at 16:18, Jason Clinton wrote:
>
> > So long as you're putting this thing together, you might also check out
> > motherboards that have SATA support. All of the SATA MB's that I've seen
> > have RAID 0+1 and SATA gives an additional transfer rate boost. Also,
> > there are some 10k RPM drives out there that only support SATA. 5.x ms
> > seek times totally kick ass. :)
> >
> >
> I saw that on some of the MB specs...serial ATA or something?  So its
> faster than a normal RAID controller?  I would love to go with 10K rpm
> drives, but looking at the budget.....hmmmm.  Was thinking about 4 7500K
> 40 Gig drives to give me decent space (although MythTV and webcam feeds
> will eat it up fast) and spread the writes out more.  I will look at
> SATA though.
>
> Thanks,
>
> Brad
>
>
>
> KC Linux Users Group -- to unsubscribe send mail to 
> majordomo-3DadQFcgQnvYtjvyW6yDsg@xxxxxxxxxxxxxxxx
> Enter without the quotes in body of message "unsubscribe kclug"
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.543 / Virus Database: 337 - Release Date: 11/23/2003



KC Linux Users Group -- to unsubscribe send mail to 
majordomo-3DadQFcgQnvYtjvyW6yDsg@xxxxxxxxxxxxxxxx
Enter without the quotes in body of message "unsubscribe kclug"