uclinux.devel (thread)

Default password :-P, Aitor Calderón
linux-2.6.16-uc0 patch set released, Greg Ungerer
- Re: linux-2.6.16-uc0 patch set released, Michael Broughton
compile shapelibrary with m68k-elf-gcc and use it in xcopilot, Dingue 2toi
533 USB driver, Giordano Bruno Wolaniuk
- RE: 533 USB driver, hennerich
change compress method for squashfs, Brad Huang
[PATCH] elf2flt: Add .preinit_array, .init_array and .fini_array, Richard Sandiford
- Re: [PATCH] elf2flt: Add .preinit_array, .init_array and .fini_array, David McCullough
serial port test, Aitor Calderón
- RE: serial port test, Nacho Soler
  - Re: serial port test, Aitor Calderón
    - RE: serial port test, Nacho Soler
    - Re: serial port test, Aitor Calderón
    - Re: serial port test, Chris Gray
- Re: serial port test, Glenn Henshaw
  - Re: serial port test, Krzysztof Blaszkowski
- Re: serial port test & 5275EVB serial config, Aitor Calderón
simulate s3c44b0 on skyeye 1.0, Johnyo
- RE: simulate s3c44b0 on skyeye 1.0, Friedrich, Lars
Cannot change romfs LMA ?, sebastien . lux
Re: Kernel Panic in snapgear-3.2, Mohan V
- Re: Re: Kernel Panic in snapgear-3.2, Greg Ungerer
Re: help with SL811HS host driver on Colfire & usb mass storage, Tom Otermans
- Re: help with SL811HS host driver on Colfire & usb mass storage, chrislor witenberg
- Re: help with SL811HS host driver on Colfire & usb mass storage, Tom Otermans
help with SL811HS host driver on Colfire & usb mass storage, chrislor witenberg
how to load, run and save images to flash(lh7a404), jahnavi p
Possible bFLT v4 format bug, Jie Zhang
- Re: Possible bFLT v4 format bug, John Williams
  - Re: Possible bFLT v4 format bug, David McCullough
    - Re: Possible bFLT v4 format bug, John Williams
  - RE: Possible bFLT v4 format bug, Gavin Lambert
  - Re: Possible bFLT v4 format bug, Richard Sandiford
- Re: Possible bFLT v4 format bug, Robin Getz
USB crash on BF533 Blackfin Processor!, amol sukerkar
- USB crash on BF533 Blackfin Processor!, Robin Getz
  - Re: USB crash on BF533 Blackfin Processor!, amol sukerkar
Boa webserver: problem with the POST method, Daniel
- RE: Boa webserver: problem with the POST method, Robert Daniels
- Re: Boa webserver: problem with the POST method, Alberto Reis
ide driver quandry..., James Beaumont-Field
cf with ide driver quandry..., James Beaumont-Field
- Re: cf with ide driver quandry..., James Beaumont-Field
- Re: cf with ide driver quandry..., Greg Ungerer
  - Re: cf with ide driver quandry..., James Beaumont-Field
[Patch] mii_link_interrupt, correct fix?, Stuart MacDonald
Disassembly with GNU toolchain?, chris m
- Re: Disassembly with GNU toolchain?, Robin Steven
- Re: Disassembly with GNU toolchain?, Phil Wilshire
  - Re: Disassembly with GNU toolchain?, chris m
problem about the length of password for pptp dial-up, Brad Huang
[PATCH] linux-2.6.x/fs/binfmt_flat.c accept absolute text executables, Philippe De Muyter
[PATCH] elf2flt : add load address option, Philippe De Muyter
- Re: [PATCH] elf2flt : add load address option, Shaun Jackman
[PATCH] gcc-2.95.3 new m68k mode : position independent data, Philippe De Muyter
x509vfy.c problem: dereferencing pointer to incomplete type, Beatriz Hargrave
Good (cheap) sbc for uClinux, Steve Clark
- Re: Good (cheap) sbc for uClinux, Hector Oron
Execute a compressed application, Oscar Fraile
- Re: Execute a compressed application, David McCullough
  - Re: Execute a compressed application, Michael Broughton
    - Re: Execute a compressed application, David McCullough
- Re: Execute a compressed application, Vivekanandan M
- RE: Execute a compressed application, Oscar Fraile
uClinux on a TI Voyage 200?, Jona Joachim
- Re: uClinux on a TI Voyage 200?, Jona Joachim
  - Re: uClinux on a TI Voyage 200?, David McCullough
    - Re: uClinux on a TI Voyage 200?, Gregg Levine
    - Re: uClinux on a TI Voyage 200?, Jona Joachim
M5206eLITE, boot from ROM OK, sebastien . lux
- Re: M5206eLITE, boot from ROM OK, Greg Ungerer
  - Re: M5206eLITE, boot from ROM OK, Thomas Goor
how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
- Re: how to mount flash via jffs2 as dir /mnt ?, Erwin Authried
  - Re: how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
    - Re: how to mount flash via jffs2 as dir /mnt ?, Suresh Steven Veigas
    - Re: how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
    - Re: how to mount flash via jffs2 as dir /mnt ?, David McCullough
    - Re: how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
    - Re: how to mount flash via jffs2 as dir /mnt ?, David McCullough
    - Re: how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
    - Re: how to mount flash via jffs2 as dir /mnt ?, David McCullough
    - Re: how to mount flash via jffs2 as dir /mnt ?, Falk Brettschneider
    - Re: how to mount flash via jffs2 as dir /mnt ?, David McCullough
[Patch] Bug in M527x timer init, Stuart MacDonald
[Patch] KS8721 PHY register wrong, Stuart MacDonald
nommu ramdisk/VFS question..., Robin Getz
- Not being able to build my apps 'in' nor 'out of tree', A. Arthur Mohr
  - Re: Not being able to build my apps 'in' nor 'out of tree', A. Arthur Mohr
- Re: nommu ramdisk/VFS question..., Aubrey
  - Re: nommu ramdisk/VFS question..., manish tirpude
- Re: nommu ramdisk/VFS question..., Robin Getz
  - Re: nommu ramdisk/VFS question..., Aubrey
E-mail with binary attachment, Barry Gravante
- RE: E-mail with binary attachment, Friedrich, Lars
bdm on cygwin, Crane, Matt
[PATCH] genromfs-0.6.0 : Add Just-In-Time linking, Philippe De Muyter
undefined reference to `__ctype_b' and `__ctype_toupper', Beatriz Hargrave
- Re: undefined reference to `__ctype_b' and `__ctype_toupper', David McCullough
  - Re: undefined reference to `__ctype_b' and `__ctype_toupper', Beatriz Hargrave
    - Re: undefined reference to `__ctype_b and `__ctype_toupper', Beatriz Hargrave
Kernel debugging ..., Iceman
How about samba in ARM7 NOMMU platform?, kiran wesley
RE: Re[2]: Embedded ARM system with Linux - advicesneeded, Friedrich, Lars
uclinux and appWeb, Gianluca Moro
RE: Re[2]: Embedded ARM system with Linux - advices needed, Friedrich, Lars
- RE: Re[2]: Embedded ARM system with Linux - advices needed, Erwin Authried
- RE: Re[2]: Embedded ARM system with Linux - advices needed, Crane, Matt
Changing FS, Aitor Calderón
- RE: Changing FS, Crane, Matt
  - Re: Changing FS, Aitor Calderón
Embedded ARM system with Linux - advices needed, Pavel Fedin
- RE: Embedded ARM system with Linux - advices needed, Friedrich, Lars
  - Re[2]: Embedded ARM system with Linux - advices needed, Pavel Fedin
    - Re: Re[2]: Embedded ARM system with Linux - advices needed, Dmitry Fedorov
    - Re: Re[2]: Embedded ARM system with Linux - advices needed, Hector Oron
- RE: Embedded ARM system with Linux - advices needed, Crane, Matt
  - Re[2]: Embedded ARM system with Linux - advices needed, Pavel Fedin
[PATCH] m68knommu : clear frame-pointer in start_thread, Philippe De Muyter
user app, Stéphane Germain
Samba client reports 0 file size, Doug Olsen
uClinux on sparc hw, Michael Potter
- uClinux on sparc hw, srinivas naga vutukuri
Error: uClibc_locale_data.h: No such file or directory, Beatriz Hargrave
PATCH m68knommu clear frame-pointer in start_thread, Philippe De Muyter
- Re: PATCH m68knommu clear frame-pointer in start_thread, Ralf Baechle
  - Re: PATCH m68knommu clear frame-pointer in start_thread, Philippe De Muyter
CONFIG_UCLINUX in user/ and linux-2.6.x, Philippe De Muyter
- Re: CONFIG_UCLINUX in user/ and linux-2.6.x, David McCullough
  - Re: CONFIG_UCLINUX in user/ and linux-2.6.x, Philippe De Muyter
    - Re: CONFIG_UCLINUX in user/ and linux-2.6.x, Philippe De Muyter
    - Re: CONFIG_UCLINUX in user/ and linux-2.6.x, David McCullough
    - Re: CONFIG_UCLINUX in user/ and linux-2.6.x, Philippe De Muyter
    - Re: CONFIG_UCLINUX in user/ and linux-2.6.x, David McCullough
RE: Linking the shared library libxml2mod.la against thenon-libtool, Friedrich, Lars
problem with -msep-data when porting libxml2 to uclinux, Beatriz Hargrave
Linking the shared library libxml2mod.la against the non-libtool, Beatriz Hargrave
- Re: Linking the shared library libxml2mod.la against the non-libtool, David McCullough
RE: Has anyone set up nfs server successfully on uC linux?, Crane, Matt
uClinux on MCF5208EVB board - finally cracked!!!!, Sulaiman Scharffenorth
Re: Has anyone set up nfs server successfully on uClinux?, Robin Getz
Problem with the u-boot booting the uclinux from the jffs2 partition, DeviPrasad Natesan
Has anyone set up nfs server successfully on uClinux?, Jason Geng
ide's for emebedded linux development, Crane, Matt
- Re: ide's for emebedded linux development, xavier.montagne
- Re: ide's for emebedded linux development, NZG
Kernel panic with snapgear-3.2, Mohan V
- Re: Kernel panic with snapgear-3.2, Greg Ungerer
Patch to add the avnet5282 board to u-boot-1.1.4, Daniel Alomar
image loading fails!, Gianluca Moro
- Re: image loading fails!, Heiko Degenhardt
  - Re: image loading fails!, Gianluca Moro
    - Re: image loading fails!, Heiko Degenhardt
- RE: image loading fails!, Crane, Matt
- RE: image loading fails!, Jordan Fuerst
  - Re: image loading fails!, Gianluca Moro
KLone ported to uClibc, Stefano Barbato
Errors When I compile uClinux-dist!, 王鹤
- RE Errors When I compile uClinux-dist!, sebastien . lux
16 bit TCP/Ip stack, Aggarwal, VikasX
- Re: 16 bit TCP/Ip stack, John Williams
- Re: 16 bit TCP/Ip stack, Fabio Giovagnini
Shared interrupts implemented yet?, James Beaumont-Field
- Re: Shared interrupts implemented yet?, Greg Ungerer
  - Re: Shared interrupts implemented yet?, Erwin Authried
    - Re: Shared interrupts implemented yet?, Greg Ungerer
    - Re: Shared interrupts implemented yet?, James Beaumont-Field
    - Re: Shared interrupts implemented yet?, John Williams
Building MCF_DBUG with gnu tool-chain, Rod Doré
- Re: Building MCF_DBUG with gnu tool-chain, Matt Waddel
  - RE: Building MCF_DBUG with gnu tool-chain, Rod Doré
    - Re: Building MCF_DBUG with gnu tool-chain, Matt Waddel
gdbserver, Crane, Matt
- Re: gdbserver, Wilson Callan
bootloaders and colilo, Crane, Matt
- Re: bootloaders and colilo, Matt Waddel
  - Re: bootloaders and colilo, Greg Ungerer
    - Re: bootloaders and colilo, Heiko Degenhardt
    - Re: bootloaders and colilo, Matt Waddel
flash recommendations, NZG
- RE: flash recommendations, Jate Sujjavanich
  - Re: flash recommendations, Suresh Steven Veigas
RPC in embedded systems, Ayoub
- Re: RPC in embedded systems, Andrew Kohlsmith
  - Re: RPC in embedded systems, Karthik . Balaguru
- Re: RPC in embedded systems, Hermann Betz
- Re: RPC in embedded systems, Guido Sohne
  - Re: RPC in embedded systems, Michael Broughton
  - Re: RPC in embedded systems, Karthik . Balaguru
- Re: RPC in embedded systems, Guido Sohne
- Re: RPC in embedded systems, Matthew Natalier
- RE: RPC in embedded systems, Friedrich, Lars
- RE: RPC in embedded systems, Crane, Matt
- RE: RPC in embedded systems, Friedrich, Lars
porting lh7a404, jahnavi p
How to compiled uCLinux-2005 for Sumsung 4510B target platform, yanjun lu
post to the list, wang tracy
- RE: post to the list, Gavin Lambert
- RE: post to the list, Friedrich, Lars
RE : [uClinux-dev] Uclinux on ARM7TDMI, Armand Thibout
CGIs not working with BOA, Daniel
- Re: CGIs not working with BOA, Uwe Beutin
- Re: CGIs not working with BOA, Daniel
A question about Makefile of uClinux2.6, Johnyo
eth0: transmit timed out, GREGOIRE, JEAN-FRANCOIS
- Re: eth0: transmit timed out, Greg Ungerer
- RE: eth0: transmit timed out, GREGOIRE, JEAN-FRANCOIS
Compiling libgcrypt in uclinux: gcry problem, Beatriz Hargrave
strange behavior of signal handler, Pavel Grishin
- Re: strange behavior of signal handler, Luke Yang
  - Re[2]: strange behavior of signal handler, Pavel Grishin
    - Re: Re[2]: strange behavior of signal handler, Luke Yang
  - RE: strange behavior of signal handler, Gavin Lambert
    - Re: strange behavior of signal handler, Luke Yang
- Re: strange behavior of signal handler, Bob Rubendunst
Want to use uclinux on PC Based Board - X86 VIA chipset, conn itnel
- Re: Want to use uclinux on PC Based Board - X86 VIA chipset, Håkan Kvist
  - Re: Want to use uclinux on PC Based Board - X86 VIA chipset, conn itnel
    - Re: Want to use uclinux on PC Based Board - X86 VIA chipset, Andrew Kohlsmith
    - Re: Want to use uclinux on PC Based Board - X86 VIA chipset, conn itnel
    - Re: Want to use uclinux on PC Based Board - X86 VIA chipset, Ayoub
    - Re: Want to use uclinux on PC Based Board - X86 VIAchipset, Ramón Flores Acedo
- 回复： Want to use uclinux on PC Based Board - X86 VIA chipset, yanjun lu
RE: General questions->free elec intro, Friedrich, Lars
Hotplug under uClinux and 2.4 kernel, Daniel Alomar
Anyone has mipsnommu patch ?, Luke Lee
Error compiling libgcrypt: mpih-add1.S, Beatriz Hargrave
- Re: Error compiling libgcrypt: mpih-add1.S, Greg Ungerer
Snapgear 3.2.0 and toolchain 20051123 (gcc-3.4.4) build problems, Satyajit Ketkar
- Re: Snapgear 3.2.0 and toolchain 20051123 (gcc-3.4.4) build problems, Greg Ungerer
General "new architecture" questions, and MIPS questions too, chris m
- Re: General "new architecture" questions, and MIPS questions too, John Williams
  - General questions->free elec intro, NZG
    - Re: General questions->free elec intro, Steve Witt
- Re: General "new architecture" questions, and MIPS questions too, Greg Ungerer
- Re: General "new architecture" questions, and MIPS questions too, David Howells
  - Re: General "new architecture" questions, and MIPS questions too, Chris Gray
Loss of serial port when console=NULL, Jordan Fuerst
- Re: Loss of serial port when console=NULL, Greg Ungerer
i18n support, Leonardo Dinnouti
Update uClinux, Oscar Fraile
- RE: Update uClinux, Daniel Alomar
  - RE: Update uClinux, Vivekanandan M
- RE: Update uClinux, Oscar Fraile
  - RE: Update uClinux, Vivekanandan M
/etc writable, MªJesús
syslog, get the ring buffer in kernel space, king dragon
romfs /dev question, Stefan Hax
- Re: romfs /dev question, Phil Wilshire
flash erase/write problem, roy santos
Re: Codec driver - AD1845, xavier.montagne
- Re: Codec driver - AD1845, Greg Ungerer
Process pointers..., sid
Which board to aquire !!!, Joao Miguel Ferreira
- Re: Which board to aquire !!!, John Williams
  - Which board to aquire !!!: Thank you, Joao Miguel Ferreira
uClinux on MCF5208EVB board - finally cracked?, Sulaiman Scharffenorth
- RE: uClinux on MCF5208EVB board - finally cracked?, Mike Lavender
- uClinux on MCF5208EVB board - finally cracked?, Sulaiman Scharffenorth
  - Re: uClinux on MCF5208EVB board - finally cracked?, Greg Ungerer
- uClinux on MCF5208EVB board - finally cracked?, Sulaiman Scharffenorth
  - Re: uClinux on MCF5208EVB board - finally cracked?, Greg Ungerer
- RE: uClinux on MCF5208EVB board - finally cracked?, Friedrich, Lars
- uClinux on MCF5208EVB board - finally cracked?, Sulaiman Scharffenorth
  - shell redirection, xavier.montagne
Meaning of ram.ld and vmlinus.lds.S LENGTH parameter, Daniel Alomar
- Re: Meaning of ram.ld and vmlinus.lds.S LENGTH parameter, Greg Ungerer
Re:How to run pppoe/pppd on uclinux?( HeWang, Solved! ), 王鹤
Re:How to run pppoe/pppd on uclinux?( HeWang, More Info.2 ), 王鹤
Re:How to run pppoe/pppd on uclinux?( HeWang, More Info. ), 王鹤
posix compliant functions in uClinux, Sijoy Cherian
- RE: posix compliant functions in uClinux, Friedrich, Lars
  - Re: posix compliant functions in uClinux, Sijoy Cherian
5282 fec problems revisited, NZG
- Re: 5282 fec problems revisited->wtmp, NZG
  - RE: 5282 fec problems revisited->wtmp, Daniel Alomar
    - RE: 5282 fec problems revisited->wtmp, C Doyle
  - Re: 5282 fec problems revisited->wtmp, Heiko Degenhardt
    - Re: 5282 fec problems revisited->wtmp, NZG
- Re: 5282 fec problems revisited, David Spain
  - RE: 5282 fec problems revisited, Daniel Alomar
    - Re: 5282 fec problems revisited, David Spain
    - RE: 5282 fec problems revisited, Daniel Alomar
    - Re: 5282 fec problems revisited, Chris Gray
    - Re: 5282 fec problems revisited, David Spain
  - Re: 5282 fec problems revisited, Andrew Kohlsmith
Codec driver, xavier.montagne
- Re: Codec driver, Greg Ungerer
- Re: Codec driver, Xavier MONTAGNE
  - Re: Codec driver, Greg Ungerer
    - Re: Codec driver, xavier.montagne
    - Re: Codec driver, Greg Ungerer
    - Re: Codec driver, xavier.montagne
solution to otousset: Problem to run the Hello example, manish tirpude
How to run pppoe/pppd on uclinux?, 王鹤
need help....lh7a404, jahnavi p
- Re: need help....lh7a404, kiran wesley
Uclinux on ARM7TDMI, Armand Thibout
- Re: Uclinux on ARM7TDMI, Vadim Lebedev
- Re: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - 回复： RE: Uclinux on ARM7TDMI, yanjun lu
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
- RE: Uclinux on ARM7TDMI, Armand Thibout
- uclinux on arm7tdmi, Iker
- RE: Uclinux on ARM7TDMI, Armand Thibout
  - RE: Uclinux on ARM7TDMI, Erwin Authried
Colilo, sebastien . lux
- Re: Colilo, Mista
- Store and Execute kernel in different places -- crt0.S, sebastien . lux
  - Store and Execute kernel in different places -- crt0.S, sebastien . lux
need help regarding how to port uClinux on lh7a404, jahnavi p
- Re: need help regarding how to port uClinux on lh7a404, Deepu d
- Re: need help regarding how to port uClinux on lh7a404, Suresh Steven Veigas
  - How to interface an TFT 640x480 lcd with uClinux?, Deepu d
    - Re: How to interface an TFT 640x480 lcd with uClinux?, xavier.montagne
  - Re: need help regarding how to port uClinux on lh7a404, Mista
    - Re: need help regarding how to port uClinux on lh7a404, manish tirpude
- Re: need help regarding how to port uClinux on lh7a404, srinivas naga vutukuri
Start-stop-daemon patch, Daniel Alomar
kmalloc with copy_to_user, James Beaumont-Field
- Re: kmalloc with copy_to_user, Rakesh Avichal Ughreja
  - Re: kmalloc with copy_to_user, James Beaumont-Field
    - Re: kmalloc with copy_to_user, Rakesh Avichal Ughreja
Application Debugging Using Insight, JUFAIL KAPOOR
- RE: Application Debugging Using Insight, Gavin Lambert
RS485, Gavin Lambert
- Re: RS485, Gregg Levine
  - RE: RS485, Gavin Lambert
    - Re: RS485, NZG
- Re: RS485, Andrew Kohlsmith
  - RE: RS485, Gavin Lambert
    - Re: RS485, Andrew Kohlsmith
    - Re: RS485, Mista
    - Re: RS485, Andrew Kohlsmith
- Re: RS485, Sijoy Cherian
uClinux on MCF5208EVB board [Greg] IGNORE LAST POST!, Sulaiman Scharffenorth
uClinux on MCF5208EVB board [Greg], Sulaiman Scharffenorth
- Re: uClinux on MCF5208EVB board [Greg], Greg Ungerer
how to disassemble image.bin [Greg], Sulaiman Scharffenorth
- Re: how to disassemble image.bin [Greg], shawn
- RE: how to disassemble image.bin [Greg], Gavin Lambert
- Re: how to disassemble image.bin [Greg], Greg Ungerer
bios for Coldfire 5328 evaluation board, Gianluca Moro
a basic question, Richard Wood
- Re: a basic question, John Williams
  - RE: a basic question, Daniel Alomar
GPL'd Drivers for I2C Hardware on MCF5282?, David Spain
- Re: GPL'd Drivers for I2C Hardware on MCF5282?, Wilson Callan
- RE: GPL'd Drivers for I2C Hardware on MCF5282?, Mike Lavender
  - RE: GPL'd Drivers for I2C Hardware on MCF5282?, Gavin Lambert
Fwd: Photo, xavier.montagne
how to disassemble image.bin, Sulaiman Scharffenorth
- Re: how to disassemble image.bin, Maciej Witaszek
  - Re: how to disassemble image.bin, Erwin Authried
- Re: how to disassemble image.bin, Greg Ungerer
Re: JFFS2 problem with IXDP465, Stefano Coluccini
- Re: JFFS2 problem with IXDP465, Greg Ungerer
  - Re: JFFS2 problem with IXDP465, Stefano Coluccini
    - Re: JFFS2 problem with IXDP465 - Solved ?, Stefano Coluccini
    - Re: JFFS2 problem with IXDP465 - Solved ?, Greg Ungerer
ActionTec DualPC Modem - linux 2.6, Steve Clark
uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- Re: uClinux on MCF5208EVB board, Greg Ungerer
corrupted file in romfs, Julien Linder
- RE: corrupted file in romfs, Daniel Alomar
- Re: corrupted file in romfs, David McCullough
  - Re: corrupted file in romfs, Julien Linder
RE: uClinux-dev Digest, Vol 35, Issue 1, Mohit Gupta
- Re: RE: uClinux-dev Digest, Vol 35, Issue 1, Phil Wilshire
- Re: RE: uClinux-dev Digest, Vol 35, Issue 1, Heiko Degenhardt
Re: Re: problem in compilation of a loadable kernel module by including slab.h, vaishali paisal
Re: M5206e LITE - Boot from ROM, Greg Ungerer
request_region vs request_mem_region, James Beaumont-Field
- Re: request_region vs request_mem_region, Greg Ungerer
  - Re: request_region vs request_mem_region, Jamie Lokier
    - Re: request_region vs request_mem_region, James Beaumont-Field
    - Re: request_region vs request_mem_region, Greg Ungerer
    - Re: request_region vs request_mem_region, Greg Ungerer
    - Re: request_region vs request_mem_region, Jamie Lokier
    - Re: request_region vs request_mem_region, Greg Ungerer
ide driver error, king dragon
PalmIIIxe with 2.4 uClinux kernel, Tyler
Questions about GDB Armulator, Liao Loya
- Re: Questions about GDB Armulator, wang longtian
  - Re: Questions about GDB Armulator, Hector Oron
    - Re: Questions about GDB Armulator, wang longtian
    - Re: Questions about GDB Armulator, Hector Oron
    - Re: Questions about GDB Armulator, Robin Steven
    - Re: Questions about GDB Armulator, Hector Oron
request_irq() enables interrupts, Pavel Grishin
Confused about ramdisk..., Daniel Alomar
- Re: Confused about ramdisk..., David McCullough
  - RE: Confused about ramdisk..., Daniel Alomar
    - Memory section, xavier.montagne
    - Re: Memory section, Erwin Authried
    - Re: Memory section, xavier.montagne
OT:longjmp setjmp, Mpourtounis Dimitrios
- Re: OT:longjmp setjmp, R.Rajaram
- Re: OT:longjmp setjmp, David McCullough
pthreads on 2.6, Mpourtounis Dimitrios
- RE: pthreads on 2.6, Daniel Alomar
problem in compilation of a loadable kernel module by including slab.h, vaishali paisal
- Re: problem in compilation of a loadable kernel module by including slab.h, David McCullough
Re: BDM programming tool for coldfire, Thomas Brinker
- Re: BDM programming tool for coldfire, Gianluca Moro
Re: BOA webserver + login/password, Daniel
- Re: BOA webserver + login/password, Heiko Degenhardt
- Re: BOA webserver + login/password, Sandro M
porting uClinux on nios kit, manish tirpude
RE: Easy questions about uClinux: autofs, zip filesand alias, Daniel Alomar
- Re: Easy questions about uClinux: autofs, zip filesand alias, Heiko Degenhardt
  - RE: Easy questions about uClinux: autofs, zip filesandalias, Daniel Alomar
    - Re: Easy questions about uClinux: autofs, zip filesandalias, xavier.montagne
    - Re: Easy questions about uClinux: autofs, zip filesandalias, Heiko Degenhardt
    - RE: Easy questions about uClinux: autofs, zip filesandalias, Daniel Alomar
plugins under armnommu, part2, Thomas Eschenbacher
Tool chain questions, Gregg Levine
- Re: Tool chain questions, Greg Ungerer
  - Re: Tool chain questions, Gregg Levine
    - tar problems (was: Tool chain questions), Heiko Degenhardt
    - RE: tar problems (was: Tool chain questions), Gregg C Levine
RE: GPL'd Drivers for QSPI Hardware in MCF5282?, Mike Lavender
- Re: GPL'd Drivers for QSPI Hardware in MCF5282?, NZG
- Re: GPL'd Drivers for QSPI Hardware in MCF5282?, David Spain
  - Problem, flood on console - serial8250: too much work for irq7, orpid.co.yu