uclinux.devel (thread)

GPL'd Drivers for QSPI Hardware in MCF5282?, David Spain
- Re: GPL'd Drivers for QSPI Hardware in MCF5282?, Wilson Callan
  - Re: GPL'd Drivers for QSPI Hardware in MCF5282?, David Spain
- Re: GPL'd Drivers for QSPI Hardware in MCF5282?, NZG
Is anyone aware of the mirror on Planetmirror?, Gregg Levine
printk() troubles ..., Iceman
Easy questions about uClinux: autofs, zip files and alias, Daniel Alomar
- Re: Easy questions about uClinux: autofs, zip files and alias, Heiko Degenhardt
Are the RTLinux patches still supported?, Gregg Levine
M5206e LITE - Boot from ROM, sebastien . lux
- Re: M5206e LITE - Boot from ROM, Suresh Steven Veigas
  - Re: M5206e LITE - Boot from ROM, sebastien . lux
image problem, kiran wesley
- Re: image problem, Aubrey
please help, mahesh
uClinux git repository, Shaun Jackman
- Re: uClinux git repository, David McCullough
printk behavior, Pavel Grishin
- Re: printk behavior, Phil Wilshire
how to auto run ifconfig after reboot the board, B Bee Ching
- Re: how to auto run ifconfig after reboot the board, Pavel Grishin
- Re: how to auto run ifconfig after reboot the board, Aubrey
X Server / neon server support in uClinux, Mista
MCF5282 cache question, Andrew Kohlsmith
- Re: MCF5282 cache question, Greg Ungerer
- Re: MCF5282 cache question, David Spain
BlackFin, Isack Waserman
- Re: BlackFin, Mike Frysinger
- Re: BlackFin, Phil Wilshire
  - Re: BlackFin, Isack Waserman
- RE: BlackFin, Zhang, Sonic
  - RE: BlackFin, Itche
RSA with ColdFire -> 5282 SSL, NZG
- Re: RSA with ColdFire -> 5282 SSL, Gianluca Moro
- Re: RSA with ColdFire -> 5282 SSL, Michael Broughton
  - Re: RSA with ColdFire -> 5282 SSL, NZG
- Re: RSA with ColdFire -> 5282 SSL, Zachary P. Landau
  - LPC2292 and 2.6.5 kernel, orpid.co.yu
BDM programming tool for coldfire, Gianluca Moro
- Re: BDM programming tool for coldfire, Wilson Callan
Coldfire timer driver (Sorry), Sonia
Progress or failure in netflash, Jordan Fuerst
Coldfire MCF5282 timer driver, Sonia
- Re: Coldfire MCF5282 timer driver, NZG
Coldfire 5282 timer driver, Sonia
Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, Martin Zwicknagl
newbie - xcopilot, sid
- Re: newbie - xcopilot, David McCullough
Language problem, Richard Wood
- Re: Language problem, John Williams
JFFS2 on new SST 39VF6401B device, Glenn Henshaw
- Re: JFFS2 on new SST 39VF6401B device, Suresh Steven Veigas
  - Re: JFFS2 on new SST 39VF6401B device, Glenn Henshaw
    - Re: JFFS2 on new SST 39VF6401B device, Glenn Henshaw
spinlock_t question, Lin, Xinsi
- Re: spinlock_t question, Doug Kehn
  - RE: spinlock_t question, Gavin Lambert
- Re: spinlock_t question, Phil Wilshire
- RE: spinlock_t question, Friedrich, Lars
  - RE: spinlock_t question, Gavin Lambert
- RE: spinlock_t question, Friedrich, Lars
  - RE: spinlock_t question, Gavin Lambert
LPC2148, José F. Hidalgo C.
uclinux/uclibc IPC support status, Pavel Grishin
RE: uClinux-dev Digest, Vol 34, Issue 28, Mohit Gupta
- Re: RE: uClinux-dev Digest, Vol 34, Issue 28, David Howells
cvs checkout of linux-2.6.x, Gianluca Moro
- Re: cvs checkout of linux-2.6.x, Thomas Goor
Problem: IDE CF lost interrupt infinite loop, Luca Cussolotto
uClinux on MCF5208EVB board (Greg), Sulaiman Scharffenorth
- Re: uClinux on MCF5208EVB board (Greg), Greg Ungerer
- uClinux on MCF5208EVB board (Greg), Sulaiman Scharffenorth
  - Re: uClinux on MCF5208EVB board (Greg), Greg Ungerer
Building elf2flt on Darwin, Bernardo Innocenti
- Re: Building elf2flt on Darwin, David McCullough
  - Re: Re: Building elf2flt on Darwin, Shaun Jackman
    - Problem on starting uClinux on LPC2292..., orpid.co.yu
    - Re: Problem on starting uClinux on LPC2292..., Phil Wilshire
    - Re[2]: Problem on starting uClinux on LPC2292..., orpid.co.yu
    - Re: Re: Building elf2flt on Darwin, Bernardo Innocenti
    - Re: Re: Building elf2flt on Darwin, David McCullough
    - Re: Re: Building elf2flt on Darwin, Bernardo Innocenti
    - Re: Re: Building elf2flt on Darwin, David McCullough
    - Re: Re: Building elf2flt on Darwin, Bernardo Innocenti
68NoMMU procesors and the VME bus, Gregg Levine
Position available - AMD MIPS Linux development, Avi Lieberman
dhclient problem, Wilson Mak
- dhclient problem, Wilson Mak
  - Re: dhclient problem, Wilson Callan
best way to get uclinux 2.6 kernel?, Guido Sohne
- Re: best way to get uclinux 2.6 kernel?, Gianluca Moro
- Re: best way to get uclinux 2.6 kernel?, Thomas Goor
Arch Files on ARM946-based platform, Liao Loya
- Re: Arch Files on ARM946-based platform, Catalin Marinas
uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
  - Re: uClinux on MCF5208EVB board, Greg Ungerer
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- uClinux on MCF5208EVB board, Sulaiman Scharffenorth
  - Re: uClinux on MCF5208EVB board, Greg Ungerer
Re: [Fwd: [patch] ide-probe timeout], Daniele Ziglioli
Macro is being treated as inline function, vaishali paisal
userland video card control, James Beaumont-Field
- Re: userland video card control, Thomas Goor
  - Re: userland video card control, James Beaumont-Field
  - RE: userland video card control, Gavin Lambert
Slow performance under linux, Gavin Lambert
- Re: Slow performance under linux, David McCullough
  - RE: Slow performance under linux, Gavin Lambert
    - Re: Slow performance under linux, David McCullough
    - RE: Slow performance under linux, Gavin Lambert
    - RE: Slow performance under linux, Gavin Lambert
    - Re: Slow performance under linux, David McCullough
    - RE: Slow performance under linux, Gavin Lambert
    - RE: Slow performance under linux, Gavin Lambert
    - Re: Slow performance under linux, Greg Ungerer
    - RE: Slow performance under linux, Gavin Lambert
    - RE: Slow performance under linux, Gavin Lambert
    - RE: [PATCH] Slow performance under linux, Gavin Lambert
CORBA on Uclinux (ORB ported on Uclinux), Karthik . Balaguru
- Re: CORBA on Uclinux (ORB ported on Uclinux), Matthew Natalier
Problems with STLport on snapgear-3.3.0, Steve Witt
- Re: Problems with STLport on snapgear-3.3.0, David McCullough
- Re: Problems with STLport on snapgear-3.3.0, Greg Ungerer
  - Re: Problems with STLport on snapgear-3.3.0, Steve Witt
uClinux on MCF5208EVB board, Sulaiman Scharffenorth
- Re: uClinux on MCF5208EVB board, Guido Sohne
- Re: uClinux on MCF5208EVB board, David McCullough
  - Re: uClinux on MCF5208EVB board, Thomas Goor
BOA webserver + login/password, Daniel
- Re: BOA webserver + login/password, Martin Zielinski
- Re: BOA webserver + login/password, Heiko Degenhardt
- Re: BOA webserver + login/password, Daniel
- Re: BOA webserver + login/password, Sandro M
  - Re: BOA webserver + login/password, Dan Searle
  - Re: BOA webserver + login/password, Heiko Degenhardt
- Re: BOA webserver + login/password, Sandro M
  - Re: BOA webserver + login/password, Heiko Degenhardt
help wanted: do -fPIC patches for gcc >= 3 (m68knommu arch) exist?, Guido Sohne
- Re: help wanted: do -fPIC patches for gcc >= 3 (m68knommu arch) exist?, David McCullough
  - Re: help wanted: do -fPIC patches for gcc >= 3 (m68knommu arch) exist?, Guido Sohne
    - Re: help wanted: do -fPIC patches for gcc >= 3 (m68knommu arch) exist?, David McCullough
    - Re: help wanted: do -fPIC patches for gcc >= 3 (m68knommu arch) exist?, Philippe De Muyter
browser on nanox, kiran wesley
mgetty and pppd dialin problem, Wolf-Rüdiger Jürgens
- RE: mgetty and pppd dialin problem, Barry Baldwin
  - Re: mgetty and pppd dialin problem, Wolf-Rüdiger Jürgens
uclinux porting for coldfire 5329, Gianluca Moro
- Re: uclinux porting for coldfire 5329, Greg Ungerer
  - Re: uclinux porting for coldfire 5329, Matt Waddel
Problem With Filter Table, kanhu
Spurious interrupts galore, James Beaumont-Field
- Re: Spurious interrupts galore, James Beaumont-Field
Relocation, Cyril Dupuit
- Re: Relocation, Shaun Jackman
Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, David Spain
- RE: Avnet MCF5282 Coldfire Console Port Breaks abovedefault CPU speed, Daniel Alomar
- Re: Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, Greg Ungerer
  - Re: Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, David Spain
    - Re: Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, Greg Ungerer
    - Re: Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, David Spain
    - Re: Avnet MCF5282 Coldfire Console Port Breaks above default CPU speed, Greg Ungerer
Re:, gerg
Fw:, gerg
Fwd: Photo, gerg
- Fwd: Photo, gerg
Re:, gerg
Fw:, gerg
Re:, gerg
Re:, gerg
Re:, gerg
Fw:, gerg
Re:, gerg
Fw:, gerg
eBook.pdf, gerg
Hello, gerg
- Hello, gerg
Fw: DSC-00465.jpg, gerg
Fw: Sexy, gerg
- Fw: Sexy, gerg
- Fw: Sexy, gerg
- Fw: Sexy, paul.mcgougan
the file, gerg
- the file, gerg
- the file, gerg
- the file, gerg
Word file, gerg
Fw: Real show, gerg
FEC ENET: rcv is not +last, Oscar Fraile
- Re: FEC ENET: rcv is not +last, Greg Ungerer
Problem executing a program from mount (NFS) to 100Mbps, fernando . navarro
USB1.1--need help, nidhi
- RE: USB1.1--need help, Gavin Lambert
- Re: USB1.1--need help, Matthew Natalier
xcopilot filesystem support, sid
- Re: xcopilot filesystem support, orpid.co.yu
pppd and demand dialling, Guido Sohne
- Re: pppd and demand dialling, Steve Clark
Error compiling pppd with pppoe, MªJesús
- Re: Error compiling pppd with pppoe, Matthew Natalier
  - gdbserver ARM7, xavier.montagne
Web server with php support, Gianluca Moro
libncurses library for uclinux, Joji Joseph
- Re: libncurses library for uclinux, Greg Ungerer
Error while compiling uClinux2.4.x for microblaze, Sanjay Patel
RE: uClinux-dev Digest, Vol 34, Issue 14, Katey Yu
[patch] 1/3: fix tiburon softreset, Katey Yu
elf2flt.ld: padding before .text, Shaun Jackman
- Re: elf2flt.ld: padding before .text, David McCullough
elf2flt: text overlaps data, Shaun Jackman
- Re: elf2flt: text overlaps data, Shaun Jackman
tftpd transfer rproblems., Greg Jeffery
SLOB allocator, Thomas Goor
- Re: SLOB allocator, Greg Ungerer
  - Re: SLOB allocator, Thomas Goor
    - Re: SLOB allocator, Phil Wilshire
    - Help Needed: Adding Ethernet Device driver for a new controller, kishor
    - Re: Help Needed: Adding Ethernet Device driver for a new controller, Matthew Natalier
    - Re: SLOB allocator, Thomas Goor
    - Re: SLOB allocator, Greg Ungerer
Cherokee web server: Someone ported it?, Sandro M
- I cant 'make dep', adimbox-uclinux
- Re: Cherokee web server: Someone ported it?, Matthew Natalier
  - Re: Cherokee web server: Someone ported it?, Erwin Authried
  - Re: Cherokee web server: Someone ported it?, John Williams
- Re: Cherokee web server: Someone ported it?, Sandro M
  - Re: Cherokee web server: Someone ported it?, Heiko Degenhardt
- Re: Cherokee web server: Someone ported it?, Sandro M
  - Re: Cherokee web server: Someone ported it?, Matthew Natalier
- Re: Cherokee web server: Someone ported it?, Sandro M
  - Re: Cherokee web server: Someone ported it?, Heiko Degenhardt
Can arm9 use uclinux?, Zheng Tiger
- Re: Can arm9 use uclinux?, srinivas naga vutukuri
Problems with telnet and kernel 2.6.12, Thorsten Wiedemer
- RE: Problems with telnet and kernel 2.6.12, Daniel Alomar
  - Re: Problems with telnet and kernel 2.6.12, Thorsten Wiedemer
    - RE: Problems with telnet and kernel 2.6.12, Daniel Alomar
ActionTec DualPC Modem daughter board, Steve Clark
uClinux on AT91FR40162S, Ramón Flores Acedo
- Re: uClinux on AT91FR40162S, Erwin Authried
- Fw: uClinux on AT91FR40162S, Ramón Flores Acedo
  - Re: Fw: uClinux on AT91FR40162S, Gianluca Moro
    - Re: uClinux on AT91FR40162S, Guido Sohne
[patch] ide-probe timeout, Daniele Ziglioli
mount -t proc proc /proc fails all of a sudden, James Beaumont-Field
- Re: mount -t proc proc /proc fails all of a sudden, James Beaumont-Field
  - Re: Re: mount -t proc proc /proc fails all of a sudden, David McCullough
  - Re: Re: mount -t proc proc /proc fails all of a sudden, Greg Ungerer
    - Re: Re: mount -t proc proc /proc fails all of a sudden, James Beaumont-Field
    - Re: Re: mount -t proc proc /proc fails all of a sudden, NZG
- Re: mount -t proc proc /proc fails all of a sudden, Greg Ungerer
Regparm on coldfire, Gavin Lambert
- Re: Regparm on coldfire, Greg Ungerer
[patch] 3/3: make flash writeable on tiburon, Katey Yu
- [patch] 3/3: make flash writeable on tiburon, Katey Yu
ANNOUNCE: m68k-uclinux-tools for OS X, Guido Sohne
Missing -msep-data for MC68VZ328 and gcc3.4.0?, Guido Sohne
Problems using ash as shell on IXDP425, Steve Witt
- Re: Problems using ash as shell on IXDP425, Thomas Geulig
  - Re: Problems using ash as shell on IXDP425, Steve Witt
gettimeofday: tv_usec is always 0, Daniel Floyd
- RE: gettimeofday: tv_usec is always 0, Gavin Lambert
AW: arm 940t, Ulrich , Axel - MCT - DE/AFT-WERDOHL
- Re: AW: arm 940t, Steve Clark
- Re: AW: arm 940t, Steve Clark
arm 940t, Steve Clark
User module makefiles, James Beaumont-Field
- RE: User module makefiles, Daniel Alomar
  - Re: User module makefiles, James Beaumont-Field
Problems compiling for M5282, esiok
- Re: Problems compiling for M5282, Wilson Callan
- Re: Problems compiling for M5282, esiok
  - Re: Problems compiling for M5282, Wilson Callan
Re: NTP client, John Williams
illegal instruction, Ottavio Campana
- Re: illegal instruction, Ottavio Campana
  - Re: illegal instruction, Ottavio Campana
List Digest Mode and Careful Posting., Uwe Beutin
elf2flt for mipsnommu, Martin Zielinski
- Re: elf2flt for mipsnommu, shawn
uClinux kernel upgradation from 2.4.24 to 2.6.14, Nripendra Singh
- Re: uClinux kernel upgradation from 2.4.24 to 2.6.14, Greg Ungerer
Problem: interrupt of ide on M5249C3 board, Janboo
- Re: Problem: interrupt of ide on M5249C3 board, Greg Ungerer
- Re: Problem: interrupt of ide on M5249C3 board, Janboo
USB in a Stamp Board, Giordano Bruno Wolaniuk
RE: uClinux-dev Digest, Vol 34, Issue 8, Giordano Bruno Wolaniuk
help! how can I find the specific source files that are used in kernel compilation??, "조용수"
- Re: help! how can I find the specific source files that are used in kernel compilation??, John Williams
- Re: help! how can I find the specific source files that are used in kernel compilation??, ayoub zaki
RE : uClinux on custom MCF5208 board (Stuart Hughes), Sulaiman Scharffenorth
- Re: RE : uClinux on custom MCF5208 board (Stuart Hughes), Stuart Hughes
  - Re: RE : uClinux on custom MCF5208 board (Stuart Hughes), Matt Waddel
  - Re: RE : uClinux on custom MCF5208 board (Stuart Hughes), Greg Ungerer
uClinux on custom MCF5208 board, Sulaiman Scharffenorth
- Re: uClinux on custom MCF5208 board, Stuart Hughes
- Re: uClinux on custom MCF5208 board, Greg Ungerer
i sincerely apologize for number of mail, mahesh
i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
- i need help in interfacing lcd, mahesh
  - Re: i need help in interfacing lcd, Håkan Kvist
- RE: i need help in interfacing lcd, Friedrich, Lars
interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
- interfacing lcd, mahesh
ntp server, Mohan V
ide bus speed vs IRQ, James Beaumont-Field
- Re: ide bus speed vs IRQ, Jamie Lokier
- Re: ide bus speed vs IRQ, Greg Ungerer
Looking for 2.6 kernel config file for AVNET MCF5282EVB Coldfire Eval Board, David Spain
- RE: Looking for 2.6 kernel config file for AVNET MCF5282EVB Coldfire Eval Board, Daniel Alomar
- RE: Looking for 2.6 kernel config file for AVNET MCF5282EVB Coldfire Eval Board, Daniel Alomar
  - Re: Looking for 2.6 kernel config file for AVNET MCF5282EVB Coldfire Eval Board, David McCullough
    - RE: Looking for 2.6 kernel config file for AVNETMCF5282EVB Coldfire Eval Board, Daniel Alomar
    - Re: Looking for 2.6 kernel config file for AVNETMCF5282EVB Coldfire Eval Board, David McCullough
The lastest version of uClinux, Cao Quang Vu
- Re: The lastest version of uClinux, Doug Kehn
RE: building custom library under snapgear developmentenvironment, Satyajit Ketkar
- Re: building custom library under snapgear developmentenvironment, Henrik Brix Andersen
JFFS2 problem with IXDP465, Stefano Coluccini
- Re: JFFS2 problem with IXDP465, Greg Ungerer
  - Re: JFFS2 problem with IXDP465, Stefano Coluccini
    - Re: JFFS2 problem with IXDP465, Greg Ungerer
    - Re: JFFS2 problem with IXDP465, Stefano Coluccini
    - Re: JFFS2 problem with IXDP465, Greg Ungerer
    - Re: JFFS2 problem with IXDP465, Stefano Coluccini
    - Re: JFFS2 problem with IXDP465, Greg Ungerer
CF Card found, really slow execution after, James Beaumont-Field
browser, kiran wesley
Multi-user support in uclinux.., DeviPrasad Natesan
- Re: Multi-user support in uclinux.., David McCullough
  - Re: Multi-user support in uclinux.., DeviPrasad Natesan
Writing to Xcopilot Screen, Barnes, Clifton A.
- Re: Writing to Xcopilot Screen, Hector Oron
- Re: Writing to Xcopilot Screen, David McCullough
- RE: RE: Writing to Xcopilot Screen, Barnes, Clifton A.
  - Re: RE: RE: Writing to Xcopilot Screen, David McCullough
build error on not defined MAGIC_ROM_PTR, Yoshinori Sato
- Re: build error on not defined MAGIC_ROM_PTR, Greg Ungerer
Confusion regarding the sources, Sriharsha
Framebuffer mmaping, Gavin Lambert
- RE: Framebuffer mmaping, Gavin Lambert
  - Re: Framebuffer mmaping, Thomas Fehrenbacher
    - RE: Framebuffer mmaping, Gavin Lambert
    - Re: Framebuffer mmaping, Aubrey
uClinux source/patch/binary repository?, Chris Blazie
- Re: uClinux source/patch/binary repository?, David McCullough
building custom library under snapgear development environment, Satyajit Ketkar
- Re: building custom library under snapgear development environment, David McCullough
(no subject), chen qg
"Enable console shell" not working, James Beaumont-Field
- Re: "Enable console shell" not working, Uwe Beutin
  - Re: "Enable console shell" not working, James Beaumont-Field
    - Re: "Enable console shell" not working, David McCullough
    - Re: "Enable console shell" not working, James Beaumont-Field
    - Re: "Enable console shell" not working, David McCullough
IXP4xx Eth DEBUG_DUMP, Doug Kehn
- Re: IXP4xx Eth DEBUG_DUMP, Greg Ungerer
mpc85xx uclinux porting, Vishwanath Patil
Serial Port Initialization, James Pee
- Re: Serial Port Initialization, Greg Ungerer
  - RE: Serial Port Initialization, James Pee
    - Re: Serial Port Initialization, Greg Ungerer
Arcturus uCdimm ColdFire 5282 + linux-2.6.x, Henrik Brix Andersen
Emulator for Bootloader?, lazybug
- Re: Emulator for Bootloader?, Catalin Marinas
smbmount mtime is wrong, Daniele Ziglioli
- [PATCH] div64.h (RE: smbmount mtime is wrong), Daniele Ziglioli
  - Re: [PATCH] div64.h (RE: smbmount mtime is wrong), Bernardo Innocenti
    - Re: [PATCH] div64.h (RE: smbmount mtime is wrong), Daniele Ziglioli
    - Re: [PATCH] div64.h (RE: smbmount mtime is wrong), Bernardo Innocenti
Problem compiling snapgear 3.3.0 (2.6) with IXP400 patches, Stefano Coluccini
- Re: Problem compiling snapgear 3.3.0 (2.6) with IXP400 patches, Greg Ungerer
  - Re: Problem compiling snapgear 3.3.0 (2.6) with IXP400 patches, Stefano Coluccini
uclinux and xcopilot, Venky
- Re: uclinux and xcopilot, David McCullough
RE: SAMSUMG SMDK2500 TCP/IP stack very very slow, Friedrich, Lars
- RES: SAMSUMG SMDK2500 TCP/IP stack very very slow, Marcio Campos de Lima
- RE: SAMSUMG SMDK2500 TCP/IP stack very very slow, Friedrich, Lars
  - RES: SAMSUMG SMDK2500 TCP/IP stack very very slow, Marcio
Fw: Funny :), mdurrant
- Fw: Funny :), gerg
- Fw: Funny :), gerg
- Fw: Funny :), gerg
- Fw: Funny :), gerg
- Fw: Funny :), gerg
bad magic 5a5a5a5a kernel BUG, Stewart Heitmann
- Re: bad magic 5a5a5a5a kernel BUG, David McCullough
  - Re: bad magic 5a5a5a5a kernel BUG, Stewart Heitmann
    - Re: bad magic 5a5a5a5a kernel BUG, David McCullough
    - Re: bad magic 5a5a5a5a kernel BUG, Stewart Heitmann
    - Re: bad magic 5a5a5a5a kernel BUG, Greg Ungerer
    - Re: bad magic 5a5a5a5a kernel BUG, Stewart Heitmann
    - Re: bad magic 5a5a5a5a kernel BUG, Greg Ungerer
    - Re: bad magic 5a5a5a5a kernel BUG, Greg Ungerer
    - Re: bad magic 5a5a5a5a kernel BUG, Stewart Heitmann
uClinux 2.6 fr SSV 5282 module, Heinz-Jürgen Oertel
- Re: uClinux 2.6 fr SSV 5282 module, NZG
  - Re: uClinux 2.6 fr SSV 5282 module, Heinz-Jürgen Oertel
    - Re: uClinux 2.6 fr SSV 5282 module, NZG
    - Re: uClinux 2.6 fr SSV 5282 module, NZG
- Re: uClinux 2.6 fr SSV 5282 module, Heiko Degenhardt
Re: Re: dma_alloc, Zoltán Dévai
- Re: Re: dma_alloc, Erwin Authried
  - Re: dma_alloc, Catalin Marinas
    - Re: Re: dma_alloc, Zoltán Dévai
    - Re: Re: dma_alloc, Zoltán Dévai
    - Re: dma_alloc, Catalin Marinas
multiple threads of execution within a single process in embedded application, Ayoub
- RE: multiple threads of execution within a single process in embedded application, Daniel Alomar
coldfire 5206e - boot image from network?, Alexander Roos
- Re: coldfire 5206e - boot image from network?, Ayoub
  - ColdFire 5271 - boot image from network?, Alexey N. Larskiy
    - Re: ColdFire 5271 - boot image from network?, Ayoub
    - Re[2]: ColdFire 5271 - boot image from network?, Alexey N. Larskiy
    - RE: Re[2]: ColdFire 5271 - boot image from network?, Daniel Alomar
    - RE: Re[2]: ColdFire 5271 - boot image from network?, Daniel Alomar
  - SAMSUMG SMDK2500 TCP/IP stack very very slow, Marcio Lima
Inetd services, DeviPrasad Natesan
- Re: Inetd services, David McCullough
  - Re: Inetd services, DeviPrasad Natesan
    - Re: Inetd services, David McCullough
- RE: Inetd services, Daniel Alomar
  - Re: Inetd services, DeviPrasad Natesan
    - Re: Inetd services, John Williams
    - Re: Inetd services, DeviPrasad Natesan
    - Re: Inetd services, John Williams
problems with current_task and namepsace, James Beaumont-Field
- problems with current_task and namepsace, James Beaumont-Field
mcfserial interrupt is LONG!, Jordan Fuerst
- Re: mcfserial interrupt is LONG!, Greg Ungerer
Historical __UCLIBC_UCLINUX_BROKEN_MUNMAP__ issue, GPN
- Re: Historical __UCLIBC_UCLINUX_BROKEN_MUNMAP__ issue, David McCullough
  - Re: Historical __UCLIBC_UCLINUX_BROKEN_MUNMAP__ issue, GPN
    - Re: Historical __UCLIBC_UCLINUX_BROKEN_MUNMAP__ issue, David McCullough
Colilo website?, Matt Waddel
[PATCH] Fix Canadian cross-compilation of elf2flt, Julian Brown
- Re: [PATCH] Fix Canadian cross-compilation of elf2flt, David McCullough
Suspicious Net proccess, Sonia
[My Right Boot] Add new board - Set IP-address, Alexander Roos
help needed, mahesh
- Re: help needed, Ayoub
Usb driver for 5282, Daniel Alomar
MTD Physmap don't detected AM29PL160CB, Alexey N. Larskiy
- Re: MTD Physmap don't detected AM29PL160CB, Suresh Steven Veigas
- Re: MTD Physmap don't detected AM29PL160CB, Alexey N. Larskiy
multiple threads vs multiple processes, Ayoub
wrong ksize of 'current' task struct, Amir Goldor
- Re: wrong ksize of 'current' task struct, David McCullough
Re: ftpd uclinux, Heiko Degenhardt
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, Heiko Degenhardt
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, Heiko Degenhardt
- RE: ftpd uclinux, Oscar Fraile
- RE: ftpd uclinux, Barry Baldwin
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, NZG
- RE: ftpd uclinux, Barry Baldwin
- ftpd uclinux, Katey Yu
- RE: ftpd uclinux, Barry Baldwin
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, Heiko Degenhardt
- RE: ftpd uclinux, Barry Baldwin
- RE: ftpd uclinux, David O'Shea
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, Heiko Degenhardt
- ftpd uclinux, Katey Yu
  - Re: ftpd uclinux, Heiko Degenhardt
- RE: ftpd uclinux, Friedrich, Lars
- RE: ftpd uclinux, Friedrich, Lars
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
- ftpd uclinux, Katey Yu
  - RE: ftpd uclinux, Daniel Alomar
Any mailing list for LINUX?, nidhi
- Re: Any mailing list for LINUX?, NZG
Re: Debugging 2.6 kernel & applications, Greg Ungerer
- Re: Debugging 2.6 kernel & applications, Lance Spaulding
Re: Timer int works but cant get past calibrate_delay, Greg Ungerer
#define changes dont take effect..., James Beaumont-Field
- Re: #define changes dont take effect..., Greg Ungerer
  - RE: #define changes dont take effect..., Gavin Lambert
    - Re: #define changes dont take effect..., James Beaumont-Field
    - RE: #define changes dont take effect..., Gavin Lambert
    - Re: #define changes dont take effect..., James Beaumont-Field
    - arm-elf toolchain compilation failed, zonquan
- RE: #define changes dont take effect..., Friedrich, Lars
Re: flatfsd, Greg Ungerer
- flatfsd, Katey Yu
- flatfsd, Katey Yu
  - Re: flatfsd, Greg Ungerer
- flatfsd, Katey Yu
  - RE: flatfsd, Gavin Lambert
  - Re: flatfsd, Greg Ungerer
Re: problems writing a driver, Greg Ungerer
- Re: problems writing a driver, Greg Ungerer
  - RE: problems writing a driver, Gavin Lambert
    - Re: problems writing a driver, Greg Ungerer
  - Re: problems writing a driver, NZG
    - Re: problems writing a driver, Greg Ungerer
    - 5272 vrs 5282 memory protection, was problems writing a driver, NZG
    - RE: 5272 vrs 5282 memory protection, was problems writing a driver, Gavin Lambert