uclinux.devel (thread)

SSHD: error: openpty: Exec format error, DeviPrasad Natesan
- Re: SSHD: error: openpty: Exec format error, DeviPrasad Natesan
flatfsd, Katey Yu
- flatfsd, Katey Yu
CPU load measurement ?, Ayoub
- Re: CPU load measurement ?, Wilson Callan
  - RE: CPU load measurement ?, Gavin Lambert
    - Re: CPU load measurement ?, Andrew Kohlsmith
- Re: CPU load measurement ?, David McCullough
RE: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, Friedrich, Lars
Timer int works but cant get past calibrate_delay, James Beaumont-Field
- Re: Timer int works but cant get past calibrate_delay, Greg Ungerer
  - Re: Timer int works but cant get past calibrate_delay, James Beaumont-Field
- Re: Timer int works but cant get past calibrate_delay, Shaun Jackman
Boa cgi mmap error., André Tousch
- Re: Boa cgi mmap error., André Tousch
- Re: Boa cgi mmap error., Uwe Beutin
ftpd uclinux, Katey Yu
- Re: ftpd uclinux, Heiko Degenhardt
- RE: ftpd uclinux, Oscar Fraile
  - Re: ftpd uclinux, Heiko Degenhardt
- ftpd uclinux, Katey Yu
pipe latency, Lei Sun
- Re: pipe latency, Greg Ungerer
memory map question, Mike Blue
- Re: memory map question, David McCullough
  - Re: memory map question, Mike Blue
problems writing a driver, Ottavio Campana
- Re: problems writing a driver, Heinz-Jürgen Oertel
  - RE: problems writing a driver, Gavin Lambert
    - Re: problems writing a driver, NZG
    - Re: problems writing a driver, Heinz-Jürgen Oertel
    - Re: problems writing a driver, Greg Ungerer
    - Re: problems writing a driver, NZG
    - Re: problems writing a driver, Michael Broughton
    - Re: problems writing a driver, NZG
    - RE: problems writing a driver, Gavin Lambert
fast baud rate on 5275, Jordan Fuerst
- Re: fast baud rate on 5275, Greg Ungerer
- RE: fast baud rate on 5275, Jordan Fuerst
  - Re: fast baud rate on 5275, Greg Ungerer
No Init Found, Barnes, Clifton A.
Rootfs / jffs2 Problem, Jakob Schiesser
- Re: Rootfs / jffs2 Problem, Phil Wilshire
gdb, P&E BDM, and Coldfire, mark . c . giacobbe
- RE: gdb, P&E BDM, and Coldfire, Oscar Fraile
- RE: gdb, P&E BDM, and Coldfire, mark . c . giacobbe
Fw:, unaltopuz
Deepu., nidhi
what i did..samsung s3c4510b, nidhi
- Re: what i did..samsung s3c4510b, Greg Holdren
- Fwd: what i did..samsung s3c4510b, nidhi
  - Re: Fwd: what i did..samsung s3c4510b, Suresh Steven Veigas
    - Thanks to all ., nidhi
dhclient DHCPDISCOVER fails, Stewart Heitmann
- Re: dhclient DHCPDISCOVER fails, Greg Ungerer
  - Re: dhclient DHCPDISCOVER fails, Stewart Heitmann
    - Re: dhclient DHCPDISCOVER fails, Doug Kehn
uClibc & make oldconfig; mtdblock_ro.c; telnetd & login shell; BusyBox msh history size, David O'Shea
snapgear 3.3.0/IXDP425 Issues, Steve Witt
- Re: snapgear 3.3.0/IXDP425 Issues, Stewart Heitmann
- Re: snapgear 3.3.0/IXDP425 Issues, Greg Ungerer
  - Re: snapgear 3.3.0/IXDP425 Issues, Steve Witt
- Re: snapgear 3.3.0/IXDP425 Issues, Marcel Almeida
Building boost (C++ library) inside the uClinux distribution, Håkan Kvist
Re: strace w/ 2.6 kernel, Thomas Geulig
uCsimm devices detail info and prices?, Naing Ye
- SV: uCsimm devices detail info and prices?, Urban Wretling
Re: nommu use compound pages?, David Howells
Fw: Sexy, unaltopuz
- Re: Fw: Sexy !!! VIRUS !!!, H. Holfelder
  - Re: VIRUS !!!'s, NZG
    - Re: Re: VIRUS !!!'s, Roger Barraud
Hello, unaltopuz
- Re: Hello !!! VIRUS, H. Holfelder
Problem with tftp client in uClinux, Greg Jeffery
openssl build problem, Michael Broughton
- Re: openssl build problem, Guido Sohne
- Re: openssl build problem, David McCullough
IDE CF and Coldfire 5282, Daniel Weiss
FD44BOX -ARM7TDMI Development Platform, Unal Topuz
- Re: FD44BOX -ARM7TDMI Development Platform, xavier.montagne
  - Re: FD44BOX -ARM7TDMI Development Platform, Unal Topuz
    - Re: FD44BOX -ARM7TDMI Development Platform, xavier.montagne
    - Re: FD44BOX -ARM7TDMI Development Platform, Unal Topuz
  - Need Info on LAN connection through /dev/eth0 device, kishor
RE:Fwd: Re: Fwd: (Alninuo Lee)any body working on samsung?..s3c4510b, alninuo_li
- RE:Fwd: Re: Fwd: (Alninuo Lee)any body working on samsung?..s3c4510b, Deepu d
  - Re: RE:Fwd: Re: Fwd: (Alninuo Lee)any body working onsamsung?..s3c4510b, Suresh Steven Veigas
to subscribe maillist, Naing Ye Thu
Fwd: Re: Fwd: any body working on samsung?..s3c4510b, nidhi
- Re: Re: Fwd: any body working on samsung?..s3c4510b, Dmitriy Cherkashin
  - Re: Re: Fwd: any body working on samsung?..s3c4510b, David McCullough
gdb code review, pointer madness, NZG
- Re: gdb code review, pointer madness, Daniel Jacobowitz
- Re: gdb code review, pointer madness, Jim Blandy
  - Re: gdb code review, pointer madness, NZG
    - Re: gdb code review, pointer madness, NZG
- Re: gdb code review, pointer madness, Carlos Manuel Duclos Vergara
- Message not available
  - Message not available
    - 5282 gdb Eclipse MI support, was remote connection crash, NZG
- RE: gdb code review, pointer madness, Friedrich, Lars
  - RE: gdb code review, pointer madness, Carlos Manuel Duclos Vergara
More telnetd and toolchains..., Daniel Alomar
- Re: More telnetd and toolchains..., Greg Ungerer
  - RE: More telnetd and toolchains..., Daniel Alomar
    - Re: More telnetd and toolchains..., Greg Ungerer
    - RE: More telnetd and toolchains..., Daniel Alomar
  - Re: More telnetd and toolchains..., Bernardo Innocenti
- Re: More telnetd and toolchains..., Bernardo Innocenti
  - RE: More telnetd and toolchains..., Daniel Alomar
Telnetd under 2.6.15-uc0, Daniel Alomar
- Re: Telnetd under 2.6.15-uc0, NZG
  - RE: Telnetd under 2.6.15-uc0, Daniel Alomar
ixp400_eth: ixEthMiiLinkStatus failed, Stewart Heitmann
- Re: ixp400_eth: ixEthMiiLinkStatus failed, Greg Ungerer
  - Re: ixp400_eth: ixEthMiiLinkStatus failed, Stewart Heitmann
problem compiling a module, Ottavio Campana
- Re: problem compiling a module, Greg Ungerer
off-topic? opinions/advice wanted for uclinux CDMA pos terminals, Guido Sohne
SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, DeviPrasad Natesan
- Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, John Williams
  - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, DeviPrasad Natesan
    - RE: SSHD in MicroBlaze: BINFMT_FLAT: reloc outsideprogram, Gavin Lambert
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outsideprogram, DeviPrasad Natesan
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outsideprogram, John Williams
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, John Williams
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, DeviPrasad Natesan
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, John Williams
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, David McCullough
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, DeviPrasad Natesan
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, David McCullough
    - RE: SSHD in MicroBlaze: BINFMT_FLAT: reloc outsideprogram, Gavin Lambert
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outsideprogram, David McCullough
    - RE: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, Gavin Lambert
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, DeviPrasad Natesan
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, Jamie Lokier
    - RE: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, Gavin Lambert
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, DeviPrasad Natesan
    - RE: SSHD in MicroBlaze: BINFMT_FLAT: relocoutsideprogram, Gavin Lambert
    - Re: SSHD in MicroBlaze: BINFMT_FLAT: reloc outside program, John Williams
port to the ARM processor, rahul gaikwad
- Re: port to the ARM processor, xavier.montagne
Fwd: any body working on samsung?..s3c4510b, nidhi
- Re: Fwd: any body working on samsung?..s3c4510b, Greg Holdren
  - Re: Fwd: any body working on samsung?..s3c4510b, nidhi
  - Re: Fwd: any body working on samsung?..s3c4510b, Deepu d
    - Re: Fwd: any body working on samsung?..s3c4510b, nidhi
    - Re: Fwd: any body working on samsung?..s3c4510b, Deepu d
    - Re: Fwd: any body working on samsung?..s3c4510b, nidhi
- RE:Fwd: Re: Fwd: any body working on samsung?..s3c4510b, alninuo_li
  - RE:Fwd: Re: Fwd: (Alninuo Lee)any body working on samsung?..s3c4510b, nidhi
Intel IXP eth's don't compile, Doug Kehn
- Re: Intel IXP eth's don't compile, Greg Ungerer
Quick Test?, Robin
- Re: Quick Test?, Greg Ungerer
  - Re: Quick Test?, Sascha Smejkal
    - Re: Quick Test?, Greg Ungerer
- RE: Quick Test?, Friedrich, Lars
- Re: Quick Test?, Robin Getz
  - Re: Quick Test?, Sascha Smejkal
- RE: Quick Test?, Friedrich, Lars
- RE: Quick Test?, Robin Getz
analyzing ftpd issue, Barry Baldwin
auto reply nastyness, NZG
- Re: auto reply nastyness, John Williams
m68k gdb server mi crashes uclinux, NZG
- RE: m68k gdb server mi crashes uclinux, Mike Lavender
  - Re: m68k gdb server mi crashes uclinux, NZG
    - Re: m68k gdb server mi crashes uclinux, NZG
Shameless Plugs, Abot Botbot
Re: share malloced data between vforked processes, Carlos Manuel Duclos Vergara
problems building uClibc on Cygwin, NZG
- Re: problems building uClibc on Cygwin, Mike Frysinger
  - Re: problems building uClibc on Cygwin, NZG
    - Re: problems building uClibc on Cygwin, Mike Frysinger
  - Re: problems building uClibc on Cygwin, Bernardo Innocenti
share malloced data within vforked process, Lei Sun
Libm.a, Daniel Alomar
- Re: Libm.a, Mike Frysinger
- Re: Libm.a, Heiko Degenhardt
atexit to on_exit, Daniel Alomar
- Re: atexit to on_exit, Mike Frysinger
  - RE: atexit to on_exit, Daniel Alomar
    - Re: atexit to on_exit, David McCullough
pthreads on 2.6, Daniel Alomar
please sujjest a good book to get start with uclinux(To:Suresh steven), nidhi
- Re: please sujjest a good book to get start with uclinux(To:Suresh steven), Suresh Steven Veigas
problems getting started with uclinux, Ottavio Campana
- Re: problems getting started with uclinux, Greg Ungerer
  - Re: problems getting started with uclinux, Ottavio Campana
    - Re: problems getting started with uclinux, Kernel panic, Ottavio Campana
    - Re: problems getting started with uclinux, Kernel panic, Greg Ungerer
    - Re: problems getting started with uclinux, Kernel panic, Ottavio Campana
    - Re: problems getting started with uclinux, Kernel panic, Ottavio Campana
    - Re: problems getting started with uclinux, Kernel panic, Ottavio Campana
    - Re: problems getting started with uclinux, Solved, Ottavio Campana
    - Re: problems getting started with uclinux, Solved, Phil Wilshire
    - Re: problems getting started with uclinux, David McCullough
    - Re: problems getting started with uclinux, NZG
    - Re: problems getting started with uclinux, David McCullough
- Re: problems getting started with uclinux, Suresh Steven Veigas
  - Re: problems getting started with uclinux, Ottavio Campana
    - Re: problems getting started with uclinux, Suresh Steven Veigas
how to add a new uart port to console, shawn
share malloced data between vforked process, Lei Sun
dlopen (dlfcn.h) support in coldfire uCLinux, Michael Silva
- Re: dlopen (dlfcn.h) support in coldfire uCLinux, David McCullough
bad exception return address on coldfire 5307, Julien Linder
- Re: bad exception return address on coldfire 5307, NZG
- Re: bad exception return address on coldfire 5307, Greg Ungerer
  - Re: bad exception return address on coldfire 5307, Julien Linder
  - Re: bad exception return address on coldfire 5307, Julien Linder
- Re: bad exception return address on coldfire 5307,
  - Re: bad exception return address on coldfire 5307, Julien Linder
- Re: bad exception return address on coldfire 5307, Julien Linder
ISP116x, Giordano Bruno Wolaniuk
Any patch for 2.6 series kernel for S3C2510, Rakesh Avichal Ughreja
Re: SnapGear 3.3.0 and OpenSSL, David McCullough
creating ETH0 device, Suresh Steven Veigas
uclinux driver question : fail to open device!pid 29: failed 65280, jack czl
- Re: uclinux driver question : fail to open device!pid 29:failed 65280, Suresh Steven Veigas
  - Re: uclinux driver question : fail to open device!pid 29:failed 65280, jack czl
    - Re: uclinux driver question : fail to open device!pid29:failed 65280, Suresh Steven Veigas
    - Re: uclinux driver question : fail to open device!pid29:failed 65280, jack czl
    - urgent, rakesh polasa
    - Re: uclinux driver question : fail to opendevice!pid29:failed 65280, C Doyle
    - Re: uclinux driver question : fail to opendevice!pid29:failed 65280, jack czl
    - Re: uclinux driver question : fail to opendevice!pid29:failed 65280, Suresh Steven Veigas
    - Re: uclinux driver question : fail to opendevice!pid29:failed 65280, jack czl
2.4.31-uc0 dhcpcd-new not reconfiguring on network loss/restoral?, Aaron Manning
IEEE 802.1w(RSTP) 802.1s(MSTP) Support, Lee Chang Soo
Multithread debugging on MMU-less ColdFire cores, Stanescu Razvan Tudor-STNR001
- Re: Multithread debugging on MMU-less ColdFire cores, David McCullough
help needed usb driver, mahesh
- help me pls, ram prasad
  - Re: help me pls, Suresh Steven Veigas
  - Re: help me pls, Guido Sohne
    - Re: help me pls, Wilson Callan
  - request, rakesh polasa
    - Re: request, David McCullough
- Re: help needed usb driver, rakesh polasa
  - Re: help needed usb driver, Guido Sohne
linux-2.6 and IXDPG425 (Montejade) status?, Stewart Heitmann
- Re: linux-2.6 and IXDPG425 (Montejade) status?, Tony Leder
  - Re: linux-2.6 and IXDPG425 (Montejade) status?, Stewart Heitmann
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Doug Kehn
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
  - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
  - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Stewart Heitmann
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Tony Leder
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
- Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
  - Re: linux-2.6 and IXDPG425 (Montejade) status?, Stewart Heitmann
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Greg Ungerer
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Stewart Heitmann
    - Re: linux-2.6 and IXDPG425 (Montejade) status?, Doug Kehn
Debugging C++ application, Lei Sun
- Re: Debugging C++ application, David McCullough
  - Re: Debugging C++ application, Lei Sun
    - Re: Debugging C++ application, David McCullough
  - Re: Debugging C++ application, Wilson Callan
    - Re: Debugging C++ application, David McCullough
    - Re: Debugging 2.6 kernel & applications, Wilson Callan
    - Re: Debugging 2.6 kernel & applications, David McCullough
Re: Re: dma_alloc, Zoltán Dévai
- Re: dma_alloc, Catalin Marinas
  - Re: Re: dma_alloc, Erwin Authried
    - Re: Re: dma_alloc, Zoltán Dévai
  - Re: Re: dma_alloc, Zoltán Dévai
gdbserver broken pipe, NZG
problems booting at91rm9200 with icd, Håkan Kvist
- Re: problems booting at91rm9200 with icd, Håkan Kvist
subs-patch-1.3x.gz for uclinux-arm, Munro Biswal
rw access for root filesystem with LEON3, t02acler
- Re: rw access for root filesystem with LEON3, Harald Küthe
snapgear-3.3.0 glibc build fails, Stewart Heitmann
tmpfs with no MMU?, NZG
- Re: tmpfs with no MMU?, Jamie Lokier
real-time performance of linux 2.6, Liao Loya
ethernet link status, C Doyle
- Re: ethernet link status, Jamie Lokier
  - Re: ethernet link status, C Doyle
    - Re: ethernet link status, Erwin Authried
realtime in linux 2.4 or 2.6, Ottavio Campana
- RE: realtime in linux 2.4 or 2.6, Daniel Alomar
change interrupt priority level, Oscar Fraile
- Re: change interrupt priority level, Greg Ungerer
- RE: change interrupt priority level, Oscar Fraile
  - Re: change interrupt priority level, Greg Ungerer
- RE: change interrupt priority level, Oscar Fraile
modules dependency issue, Aubrey
R_68K_GOT16O compiling samba with the new uclinux-dist, Daniel Alomar
- Re: R_68K_GOT16O compiling samba with the new uclinux-dist, David McCullough
[patch] fix previous nios/nios2 patch, Mike Frysinger
- Re: [patch] fix previous nios/nios2 patch, Greg Ungerer
MTD/JFFS2 sloooowww, Barry Baldwin
- Re: MTD/JFFS2 sloooowww, David McCullough
- Re: MTD/JFFS2 sloooowww, Sergei Sharonov
- RE: MTD/JFFS2 sloooowww, Jate Sujjavanich
- Re: MTD/JFFS2 sloooowww, Barry Baldwin
  - Re: MTD/JFFS2 sloooowww, Erwin Authried
  - Re: MTD/JFFS2 sloooowww, David McCullough
- RE: MTD/JFFS2 sloooowww, Barry Baldwin
  - RE: MTD/JFFS2 sloooowww, Erwin Authried
    - Linux kernel modules development in C++, ayoub zaki
    - Re: Linux kernel modules development in C++, Dmitry Fedorov
    - ARM stability on 2.6?, Lance Spaulding
    - Re: ARM stability on 2.6?, Catalin Marinas
- RE: MTD/JFFS2 sloooowww, Barry Baldwin
cannot create a flt file from basic .S code, Mike Frysinger
- Re: cannot create a flt file from basic .S code, David McCullough
  - Re: cannot create a flt file from basic .S code, Mike Frysinger
Help getting started - Coldfire, Jordan Keuseman
- Re: Help getting started - Coldfire, NZG
  - Re: Help getting started - Coldfire, Jordan Keuseman
sound API for kernel 2.4, Aristotelis Iordanidis
Power_off on linux-2.6.15, Daniel Alomar
- Re: Power_off on linux-2.6.15, Greg Ungerer
New "bug" on 2.6.15 and tiny_shmem, Daniel Alomar
- Re: New "bug" on 2.6.15 and tiny_shmem, Catalin Marinas
  - RE: Re: New "bug" on 2.6.15 and tiny_shmem, Daniel Alomar
    - Re: New "bug" on 2.6.15 and tiny_shmem, Catalin Marinas
Please:port linux.bin&romfs.img to 2M*8 SRAM, lee bob
- Re: Please:port linux.bin&romfs.img to 2M*8 SRAM, David McCullough
Patch against samba, Daniel Alomar
- Re: Patch against samba, Greg Ungerer
can't load MTD/JFFS partitions, MªJesús
- RE: can't load MTD/JFFS partitions, Daniel Alomar
Port to MPC564, Garcia Martinez Asier
Regarding usb ---- Please help me...., nimesh kanoth
RE: segmentation fault from ucfront during libz compile, Jate Sujjavanich
- segmentation fault from ucfront during libz compile, Jate Sujjavanich
  - Re: segmentation fault from ucfront during libz compile, David McCullough
Gcc-3.4 toolchain, m68knommu, errors and patches..., Daniel Alomar
- Re: Gcc-3.4 toolchain, m68knommu, errors and patches..., Bernardo Innocenti
  - RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Daniel Alomar
    - RE: RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Daniel Alomar
    - Re: RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Javier Herrero
    - RE: RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Daniel Alomar
    - RE: RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Daniel Alomar
    - RE: RE: Gcc-3.4 toolchain, m68knommu, errors and patches... [Solved], Daniel Alomar
    - Re: RE: Gcc-3.4 toolchain, m68knommu, errors and patches..., Jamie Lokier
linux-2.6.15-uc0 patch set released, Greg Ungerer
- RE: linux-2.6.15-uc0 patch set released, Daniel Alomar
  - Re: linux-2.6.15-uc0 patch set released, Greg Ungerer
- RE: linux-2.6.15-uc0 patch set released, Daniel Alomar
  - Re: linux-2.6.15-uc0 patch set released, Greg Ungerer
    - RE: linux-2.6.15-uc0 patch set released, Daniel Alomar
can't load module of kernel, king dragon
Question on FLATFSD, DeviPrasad Natesan
- Re: Question on FLATFSD, David McCullough
NFS mount on IXDP425 with initrd support, vinay srinivasa
- NFS mount on IXDP425 with initrd support, vinay srinivasa
porting libpdel-0.5.3 to uClinux/uClibc, Guido Sohne
Does anyone try to port QT into uclinux?, Jason
- Re: Does anyone try to port QT into uclinux?, Hector Oron
ENC28J60 with MCF5249 board, Suresh Steven Veigas
elf2flt and flthdr source, Shaun Jackman
- Re: elf2flt and flthdr source, Greg Ungerer
patches for nios2, Thomas Chou
- Re: patches for nios2, Greg Ungerer
porting uclinux for platform with ARM946, Liao Loya
- RE: porting uclinux for platform with ARM946, Hyok S. Choi
Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
- Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
  - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Phil Wilshire
    - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
    - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
    - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Glenn Henshaw
    - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
    - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Greg Ungerer
- Re: Mac OS X hosted cross compiler for m68k-elf wanted, Glenn Henshaw
  - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
  - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
- Re: Mac OS X hosted cross compiler for m68k-elf wanted, Heiko Degenhardt
  - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
- RE: Mac OS X hosted cross compiler for m68k-elf wanted, Friedrich, Lars
  - Re: Mac OS X hosted cross compiler for m68k-elf wanted, Guido Sohne
Driver comparison uCLinux and Linux, Tim Schneider
- Re: Driver comparison uCLinux and Linux, NZG
  - Re: Driver comparison uCLinux and Linux, Tim Schneider
    - Re: Driver comparison uCLinux and Linux, NZG
    - Re: Driver comparison uCLinux and Linux, David McCullough
Problem compiling modules kernel 2.6, Stefano Caioli
- RE: Problem compiling modules kernel 2.6, Daniel Alomar
- RE: Problem compiling modules kernel 2.6, Daniel Alomar
  - RE: Problem compiling modules kernel 2.6, Stefano Caioli
    - RE: Problem compiling modules kernel 2.6, Daniel Alomar
    - RE: Problem compiling modules kernel 2.6, Stefano Caioli
    - RE: Problem compiling modules kernel 2.6, Daniel Alomar
    - RE: Problem compiling modules kernel 2.6, Stefano Caioli
    - RE: Problem compiling modules kernel 2.6, Daniel Alomar
    - RE: Problem compiling modules kernel 2.6, Stefano Caioli
    - Re: Problem compiling modules kernel 2.6, Ayoub
    - Re: Problem compiling modules kernel 2.6, Stefano Caioli
    - RE: Problem compiling modules kernel 2.6, Daniel Alomar
    - RE: Problem compiling modules kernel 2.6, Stefano Caioli
    - RE: Problem compiling modules kernel 2.6, Daniel Alomar
Re: Changes to romfs-inst.sh break iptables Makefile, David McCullough
Re: JFFS2 problem while rebooting, David McCullough
Re: Busybox mount problems and patch, David McCullough
- Re: Busybox mount problems and patch, NZG
  - Re: Busybox mount problems and patch, David McCullough
    - Re: Busybox mount problems and patch, Greg Ungerer
- RE: Busybox mount problems and patch, Friedrich, Lars
  - Re: Busybox mount problems and patch, NZG
- Re: Busybox mount problems and patch, Robin Getz
- Re: Busybox mount problems and patch, Robin Getz
  - Re: Busybox mount problems and patch, NZG
NFS mount on IXDP425, vinay srinivasa
- NFS mount on IXDP425, vinay srinivasa
could load modules in kernel-2.4.17, 肖 dragon
- RE: could load modules in kernel-2.4.17, 肖 dragon
- Re: could load modules in kernel-2.4.17, David McCullough
  - Re: could load modules in kernel-2.4.17, 肖 dragon
    - Re: could load modules in kernel-2.4.17, David McCullough
[patch] Atmel AT91 kernel timer, Erwin Authried
- Re: [patch] Atmel AT91 kernel timer, David McCullough
Re: [patch] bug in gettimeoffset for Atmel AT91, David McCullough
- Re: [patch] bug in gettimeoffset for Atmel AT91, Erwin Authried
  - Re: [patch] bug in gettimeoffset for Atmel AT91, David McCullough
- Re: [patch] bug in gettimeoffset for Atmel AT91, Shaun Jackman
ESS DVD IC's, Richard Sloan
Re: 2.6 arm Problem: do_page_fault? : arch/arm/mm/fault.c 310 (Conexant CX821xx CPU), Catalin Marinas
Re: How to understand "add r0, pc, #-(8+.-StackData)", Catalin Marinas
- Re: Re: How to understand "add r0, pc, #-(8+.-StackData)", Robin Steven
Re: New uclinux-dist, Greg Ungerer
- RE: New uclinux-dist, Daniel Alomar
  - Re: New uclinux-dist, Greg Ungerer
  - RE: New uclinux-dist, Terje Nilsen
    - RE: New uclinux-dist, Daniel Alomar
    - RE: New uclinux-dist, Daniel Alomar
    - Re: New uclinux-dist, David Howells
    - Re: New uclinux-dist, David Howells
    - Re: New uclinux-dist, David Howells
    - RE: New uclinux-dist, Daniel Alomar
    - RE: New uclinux-dist, Terje Nilsen
    - Re: New uclinux-dist, NZG
    - RE: New uclinux-dist, Daniel Alomar
    - RE: New uclinux-dist, Daniel Alomar
    - Re: New uclinux-dist, Phil Wilshire
    - Re: New uclinux-dist irqs ( resend), Phil Wilshire
    - RE: New uclinux-dist, Daniel Alomar
    - Re: New uclinux-dist, NZG
    - RE: New uclinux-dist, Terje Nilsen
    - RE: New uclinux-dist, Daniel Alomar
    - New uclinux-dist and new toolchain with GCC-3.4.X, Daniel Alomar
    - RE: New uclinux-dist, Terje Nilsen
    - RE: New uclinux-dist, Daniel Alomar
- RE: New uclinux-dist, Friedrich, Lars
  - RE: New uclinux-dist, Terje Nilsen
    - Re: New uclinux-dist, David Howells
    - RE: New uclinux-dist, Terje Nilsen
    - Re: New uclinux-dist, David Howells
- RE: New uclinux-dist, Terje Nilsen
  - RE: New uclinux-dist, Daniel Alomar
- RE: New uclinux-dist, Terje Nilsen
  - RE: New uclinux-dist, Daniel Alomar
- RE: New uclinux-dist, Terje Nilsen
  - RE: New uclinux-dist, Daniel Alomar
    - RE: New uclinux-dist, Terje Nilsen
Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
- Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, David McCullough
- Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
  - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, NZG
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, NZG
Re: ColdFire MCF5474, with or without MMU support, or both?, Leon Woestenberg
- Re: ColdFire MCF5474, with or without MMU support, or both?, Greg Ungerer
  - Re: ColdFire MCF5474, with or without MMU support, or both?, Matt Waddel
    - Re: Re: ColdFire MCF5474, with or without MMU support, or both?, Josef . Baumgartner
    - Re: ColdFire MCF5474, with or without MMU support, or both?, Leon Woestenberg
- Re: ColdFire MCF5474, with or without MMU support, or both?, Leon Woestenberg
  - Re: ColdFire MCF5474, with or without MMU support, or both?, Greg Ungerer