uclinux.devel (thread)

How to understand "add r0, pc, #-(8+.-StackData)", Robin Steven
Busybox mount problems and patch, NZG
[patch] bug in gettimeoffset for Atmel AT91, Erwin Authried
boa 0.94.14 (php boa) problems, NZG
2.6 arm Problem: do_page_fault? : arch/arm/mm/fault.c 310 (Conexant CX821xx CPU), Johann Hanne
[patch] 3/3: make flash writeable on tiburon, Johann Hanne
- Re: [patch] 3/3: make flash writeable on tiburon, David McCullough
[patch] 2/3: make reboot work on tiburon, Johann Hanne
- Re: [patch] 2/3: make reboot work on tiburon, David McCullough
[patch] 1/3: fix tiburon softreset, Johann Hanne
- Re: [patch] 1/3: fix tiburon softreset, David McCullough
Re: Hi, I need some help with JFFS2 operation., Suresh Steven Veigas
- Re: Hi, I need some help with JFFS2 operation., Suresh Steven Veigas
JFFS2 problem while rebooting, Suresh Steven Veigas
- Re: JFFS2 problem while rebooting, David McCullough
  - Re: JFFS2 problem while rebooting, Suresh Steven Veigas
Context switch time, Jayakara, Nalthooru
- Re: Context switch time, Robin Getz
ColdFire MCF5474, with or without MMU support, or both?, Leon Woestenberg
- Re: ColdFire MCF5474, with or without MMU support, or both?, Greg Ungerer
Kernel fails to allocate large amounts of contiguous memory !, Sreecharan Sivadevuni
Do i need to write the HAL for USB M5275EVB?, JUFAIL KAPOOR
I2C on MCF5282, Wilson Callan
- Re: I2C on MCF5282, Andrew Kohlsmith
uClinux-2.4.32-uc0 released, David McCullough
Merry Christmas, it's bin a pleasure..., Terje Nilsen
urgent, rakesh polasa
sys_ptrace() code segment question, Matt Waddel
- Re: sys_ptrace() code segment question, David McCullough
EMT trap, Ben Kirk
JFFS2 newer kernel error message, NZG
- Re: JFFS2 newer kernel error message, David McCullough
RE: System V IPC with nommu under 2.6, Terje Nilsen
- RE: System V IPC with nommu under 2.6, Daniel Alomar
- RE: System V IPC with nommu under 2.6, Daniel Alomar
I am in need of mach-S3C4510X, Suddavanda
- Re: I am in need of mach-S3C4510X, nidhi
  - Re: I am in need of mach-S3C4510X, David McCullough
"--fatal-warnings" ld flag not supported, Thomas Goor
IXP425 userspace alignment, mpourtou
- Re: IXP425 userspace alignment, Doug Kehn
  - Re: IXP425 userspace alignment, mpourtou
    - Re: IXP425 userspace alignment, David McCullough
    - Re: IXP425 userspace alignment, mpourtou
    - Re: IXP425 userspace alignment, David McCullough
    - Re: IXP425 userspace alignment, mpourtou
    - Re: IXP425 userspace alignment, Paul Mundt
    - Re: IXP425 userspace alignment, Chris Gray
adding new application, nidhi
- Re: adding new application, Suresh Steven Veigas
Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
- Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Andrew Kohlsmith
  - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, NZG
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Andrew Kohlsmith
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, NZG
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Andrew Kohlsmith
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, francesco
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, NZG
    - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Andrew Kohlsmith
- Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Michael Durrant
- RE: Arcturus uC5282 with kerner 2.6.x Compile problem!, Friedrich, Lars
  - Re: Arcturus uC5282 with kerner 2.6.x Compile problem!, Chris Gray
Running a simple hello world program., ashis dash
- Re: Running a simple hello world program., Dan Searle
  - Re: Running a simple hello world program., ashis dash
    - Re[2]: Running a simple hello world program., Dan Searle
- Re: Running a simple hello world program., Suresh Steven Veigas
  - Re: Running a simple hello world program., ashis dash
Cannot able to determine where to start, Suddavanda
- RE: Cannot able to determine where to start, Friedrich, Lars
NOMMU: Make SYSV IPC SHM use. Errors in the Patch..., Daniel Alomar
Memory Leak in uClinux based system, V K.Anand
- Re: Memory Leak in uClinux based system, xavier.montagne
  - Re: Memory Leak in uClinux based system, V K.Anand
NTP client, Nripendra Singh
- Re: NTP client, Manjur
mtd partitions in flash NOT ram, Jordan Fuerst
- Re: mtd partitions in flash NOT ram, David McCullough
- RE: mtd partitions in flash NOT ram, Jordan Fuerst
Socket application CONNECT problem, Suresh Steven Veigas
New uclinux-dist, Daniel Alomar
- RE: New uclinux-dist, Daniel Alomar
- RE: New uclinux-dist, Terje Nilsen
  - RE: New uclinux-dist, Daniel Alomar
RE: Question on the current behaviour of malloc () onuClinux, Friedrich, Lars
- Re: Question on the current behaviour of malloc () onuClinux, Jie Zhang
- RE: Re: Question on the current behaviour of malloc () onuClinux, Friedrich, Lars
Question on the current behaviour of malloc () on uClinux, Jie Zhang
- Re: Question on the current behaviour of malloc () on uClinux, David McCullough
  - Re: Question on the current behaviour of malloc () on uClinux, Mike Frysinger
    - Re: Question on the current behaviour of malloc () on uClinux, Jie Zhang
(no subject), Suddavanda
adding new applications when compiling.., nidhi
- Re: adding new applications when compiling.., Suresh Steven Veigas
  - Re: adding new applications when compiling.., nidhi
    - Re: adding new applications when compiling.., Suresh Steven Veigas
    - Re: adding new applications when compiling.., nidhi
Best Linux distribution to compile ucLinux, Vitor
- RE: Best Linux distribution to compile ucLinux, Daniel Alomar
  - Re: Best Linux distribution to compile ucLinux, NZG
- Re: Best Linux distribution to compile ucLinux, Javier Herrero
  - Re: Best Linux distribution to compile ucLinux, xavier.montagne
  - Re: Best Linux distribution to compile ucLinux, Jamie Lokier
- Re: Best Linux distribution to compile ucLinux, Wolf-Rüdiger Jürgens
  - RE: Best Linux distribution to compile ucLinux, Terje Nilsen
    - RES: Best Linux distribution to compile ucLinux, Vitor
- Re: Best Linux distribution to compile ucLinux, Hector Oron
5282 Coldfire AtoD driver, NZG
- Re: 5282 Coldfire AtoD driver, nidhi
  - Re: 5282 Coldfire AtoD driver, Suresh Steven Veigas
- Re: 5282 Coldfire AtoD driver, Alan Carvalho de Assis
dma_alloc, Zoltán Dévai
- Re: dma_alloc, Catalin Marinas
Changes to romfs-inst.sh break iptables Makefile, Bill Borton
need help for patch linux_2.6.5 for PLC22xx, Lin, Xinsi
Huge 2.6 modules [Half solved], Daniel Alomar
- Re: Huge 2.6 modules [Half solved], David McCullough
  - Re: Huge 2.6 modules [Half solved], NZG
    - RE: Huge 2.6 modules [Half solved], Daniel Alomar
    - Re: Huge 2.6 modules [Half solved], David McCullough
    - Re: Huge 2.6 modules [Half solved], NZG
    - Re: Huge 2.6 modules [Half solved], David McCullough
    - Re: Huge 2.6 modules [Half solved], NZG
    - RE: Huge 2.6 modules [Half solved], Daniel Alomar
    - Re: Huge 2.6 modules [Half solved], NZG
    - Re: Huge 2.6 modules [Half solved], David McCullough
- RE: Huge 2.6 modules [Half solved], Friedrich, Lars
  - RE: Huge 2.6 modules [Half solved], Daniel Alomar
    - Re: Huge 2.6 modules [Half solved], David McCullough
help! how can I get genksyms in fc4?, 将军
Thread on kernel, sasin janpungtong
Help me...kernel is showing *** ZERO DIVIDE *** FORMAT=4, Sijoy Cherian
Debugging Memory Leaks, Glenn Henshaw
- Re: Debugging Memory Leaks, Matthew Natalier
Developement board with ARM and PCIe ?, Ayoub
Size of Routing Table Entries, Eric Aber
framebuffer in FPGA, but which approach is best?, Leon Woestenberg
uClinux-dist-test-20051209 released for testing, Greg Ungerer
Huge 2.6 modules (part II), Daniel Alomar
- Re: Huge 2.6 modules (part II), NZG
Huge 2.6 modules, Daniel Alomar
- RE: Huge 2.6 modules, Friedrich, Lars
- Re: RE: Huge 2.6 modules, Daniel Alomar
  - Re: Huge 2.6 modules, NZG
- RE: RE: Huge 2.6 modules, Friedrich, Lars
  - RE: RE: Huge 2.6 modules, Daniel Alomar
    - Re: Huge 2.6 modules, NZG
    - RE: Huge 2.6 modules, Daniel Alomar
Nios2, Cristiano Ghirardi
- Re: Nios2, Patrice Kadionik
  - Re: Nios2, Cristiano Ghirardi
    - Re: Nios2, Patrice Kadionik
    - Re: Nios2, Cristiano Ghirardi
- Re: Nios2, Waschk,Kolja
  - Re: Nios2, Cristiano Ghirardi
elftoflat for big endian mips r3000, shawn
Preferred way to change settings from web page., Jordan Fuerst
- Re: Preferred way to change settings from web page., Heiko Degenhardt
- RE: Preferred way to change settings from web page., Friedrich, Lars
- RE: Preferred way to change settings from web page., Jordan Fuerst
  - Re: Preferred way to change settings from web page., David McCullough
The problem is with messgae queues, Sijoy Cherian
- Http post, marcio
- RE: The problem is with messgae queues, Friedrich, Lars
  - Re: The problem is with messgae queues, Sijoy Cherian
- RE: The problem is with messgae queues, Friedrich, Lars
inflate.c [Invalid uncompress format], Lee Chang Soo
- Re: inflate.c [Invalid uncompress format], David McCullough
  - Re: inflate.c [Invalid uncompress format], Lee Chang Soo
    - Re: inflate.c [Invalid uncompress format], David McCullough
Kernel 2.6.9/14/15, patches and SYSVIPC for nommu, Daniel Alomar
- RE: Kernel 2.6.9/14/15, patches and SYSVIPC for nommu, Friedrich, Lars
  - RE: Kernel 2.6.9/14/15, patches and SYSVIPC for nommu, Daniel Alomar
    - RE: Kernel 2.6.9/14/15, patches and SYSVIPC for nommu, Terje Nilsen
System uptime, Sijoy Cherian
- Re: System uptime, Erwin Authried
  - Re: System uptime, Sijoy Cherian
    - Re[2]: System uptime, Dan Searle
    - Message not available
    - Message not available
    - Re[4]: System uptime, Dan Searle
the macro NGROUPS_MAX issue, Aubrey
- RE: the macro NGROUPS_MAX issue, Friedrich, Lars
SST39VF6401 erase timeout, Mpourtounis Dimitrios
- Re: SST39VF6401 erase timeout, Mpourtounis Dimitrios
- Re: SST39VF6401 erase timeout, Suresh Steven Veigas
How do I find the latest kenel patches?, terje.nilsen
- Re: How do I find the latest kenel patches?, David McCullough
- Re: How do I find the latest kenel patches?, Greg Ungerer
Coldfire Auto RTS toggle, NZG
- Re: Coldfire Auto RTS toggle, Andrew Kohlsmith
  - Re: Coldfire Auto RTS toggle, NZG
Minigui and uClinux/Coldfire, Javier Herrero
- Re: Minigui and uClinux/Coldfire, xavier.montagne
shared libraries enabled - system halts, Alexander Roos
- Re: shared libraries enabled - system halts, David McCullough
  - uC-libc, init, Kernel panic: Attempted to kill init!, Alexander Roos
    - Re: uC-libc, init, Kernel panic: Attempted to kill init!, s . s-c-h-m-i-t-t
    - Re: uC-libc, init, Kernel panic: Attempted to kill init!, David McCullough
    - Re: uC-libc, init, Kernel panic: Attempted to kill init!, David McCullough
    - Re: uC-libc, init, Kernel panic: Attempted to kill init!, Alexander Roos
Montejade Falsh problem, anakin Skywalker
SCHED_RR with uClinux, Falk Brettschneider
- Re: SCHED_RR with uClinux, Andrew Kohlsmith
  - Re: SCHED_RR with uClinux, Falk Brettschneider
Building external 2.6 modules [SOLVED], Daniel Alomar
Sorry for my previous duplicated email......, Daniel Alomar
can4linux/FlexCAN - disconnected CAN bus giving messages?, Andrew Kohlsmith
- Re: can4linux/FlexCAN - disconnected CAN bus giving messages?, Heinz-Jürgen Oertel
  - Re: can4linux/FlexCAN - disconnected CAN bus giving messages?, Andrew Kohlsmith
    - Message not available
    - Re: can4linux/FlexCAN - disconnected CAN bus giving messages?, Andrew Kohlsmith
    - Re: can4linux/FlexCAN - disconnected CAN bus giving messages?, Heinz-Jürgen Oertel
Newbie help needed - download hello world app to ColdFire, Neel Bakarania
- Re: Newbie help needed - download hello world app to ColdFire, Sijoy Cherian
ashok hirpara wants to talk with you on Skype, ashok hirpara
netflash extension questions, GPN
Problem with message queue, jamal
5282 Timer A GPIO woes, Andrew Kohlsmith
Re: Sigma Designs (was Re: starting with uClinix), Robin Getz
- Re: Sigma Designs (was Re: starting with uClinix), Jamie Lokier
- Re: Re: Sigma Designs (was Re: starting with uClinix), phil
- Re: Sigma Designs (was Re: starting with uClinix), Robin Getz
  - Re: Sigma Designs (was Re: starting with uClinix), Jamie Lokier
- Re: Sigma Designs (was Re: starting with uClinix), Robin Getz
  - Re: Sigma Designs (was Re: starting with uClinix), Jamie Lokier
mkfs.ext3 !, Sreecharan Sivadevuni
- Re: mkfs.ext3 !, Dan Searle
Re: local single-platform version of uclinux_dist, Håkan Kvist
- Re: local single-platform version of uclinux_dist, Håkan Kvist
Structure with fixed address, Deepu d
Problem in search_binary_handler() => fn(bprm, regs), s . s-c-h-m-i-t-t
- Problem in search_binary_handler() => fn(bprm, regs), s . s-c-h-m-i-t-t
  - Re: Problem in search_binary_handler() => fn(bprm, regs), S. Schmitt
Question on using JFFS2 on MTD using Intel flash TE28F640 on uClinux-2.4-24, Sreecharan Sivadevuni
- Re: Question on using JFFS2 on MTD using Intel flashTE28F640 on uClinux-2.4-24, Suresh Steven Veigas
  - Re: Question on using JFFS2 on MTD using Intel flashTE28F640 on uClinux-2.4-24, Sreecharan Sivadevuni
    - Re: Question on using JFFS2 on MTD using IntelflashTE28F640 on uClinux-2.4-24, Suresh Steven Veigas
    - Re: Question on using JFFS2 on MTD using IntelflashTE28F640 on uClinux-2.4-24, Sreecharan Sivadevuni
RE: [Patch] Generate a module dependency description file/lib/modules/modules.dep for modprobe, Zhang, Sonic
[Patch] Generate a module dependency description file /lib/modules/modules.dep for modprobe, Zhang, Sonic
- rom filesystem under 2.6, Lance Spaulding
  - Re: rom filesystem under 2.6, Greg Ungerer
    - Re: rom filesystem under 2.6, anakin Skywalker
RE: CAN driver for linux-2.6.x, Mike Lavender
- Re: RE: CAN driver for linux-2.6.x, Andrew Kohlsmith
uClinux FLAT binary, Lei Sun
- Re: uClinux FLAT binary, Greg Ungerer
- RE: uClinux FLAT binary, Friedrich, Lars
  - Re: uClinux FLAT binary, Greg Ungerer
Patch to ./user/vplay/Makefile, Robin Getz
- Does anybody has ported libusb to uClinux ?, marcio
- Re: Patch to ./user/vplay/Makefile, Greg Ungerer
Fwd: IXDPG425 Flash Problem, anakin Skywalker
- IXDPG425 Flash problem, anakin Skywalker
Is stdc++ threadsafe by default?, Mihai Caraman
- RE: Is stdc++ threadsafe by default?, Friedrich, Lars
  - RE: Is stdc++ threadsafe by default?, Mihai Caraman
- RE: Is stdc++ threadsafe by default?, Friedrich, Lars
  - RE: Is stdc++ threadsafe by default?, Mihai Caraman
- RE: Is stdc++ threadsafe by default?, Friedrich, Lars
Modbus RTU, Sijoy Cherian
- Re: Modbus RTU, charleses
RTU Implementation in Modbus communication, Sijoy Cherian
Coldfire QSPI: Found a bug?, Stefano Caioli
- Re: Coldfire QSPI: Found a bug?, Michael Silva
  - Re: Coldfire QSPI: Found a bug?, NZG
    - Re: Coldfire QSPI: Found a bug?, Stefano Caioli
    - Re: Coldfire QSPI: Found a bug?, NZG
    - Re: Coldfire QSPI: Found a bug?, NZG
- Re: Coldfire QSPI: Found a bug?, simon guinot
Plotting graph with uClinux, Sandro M
- Re: Plotting graph with uClinux, Dan Searle
- Re: Plotting graph with uClinux, Raúl Sánchez Siles
  - Re: Plotting graph with uClinux, Javier Cardona
- Re: Plotting graph with uClinux, Robin Getz
  - Re: Plotting graph with uClinux, Juergen Hennerich
- Re: Plotting graph with uClinux, Sandro M
  - RE: Plotting graph with uClinux, hennerich
- Re: Plotting graph with uClinux, Sandro M
- RE: Plotting graph with uClinux, Friedrich, Lars
- RE: Plotting graph with uClinux, Robin Getz
Re: Problem with ucd-SNMP (SET) (SOLVED), Sandro M
Building external 2.6 modules for uClinux. Need a Makefile...., Daniel Alomar
- RE: Building external 2.6 modules for uClinux. Need aMakefile...., Daniel Alomar
  - Re: Building external 2.6 modules for uClinux. Need aMakefile...., NZG
- RE: Building external 2.6 modules for uClinux. Need aMakefile...., Daniel Alomar
building the m68k toolchain from scratch for xcopilot, Richard Wicks
- Re: building the m68k toolchain from scratch for xcopilot, Richard Wicks
Somenoe has the elftoflat for big endian mips?, shawn
RE: RE:UART missing bytes at 115200 FOUND?, Jordan Fuerst
- Re: RE:UART missing bytes at 115200 FOUND?, Andrew Kohlsmith
- RE: RE:UART missing bytes at 115200 FOUND?, Jordan Fuerst
  - Re: RE:UART missing bytes at 115200 FOUND?, Andrew Kohlsmith
    - Re: RE:UART missing bytes at 115200 FOUND?, Chris Gray
    - Re: RE:UART missing bytes at 115200 FOUND?, Andrew Kohlsmith
    - Re: RE:UART missing bytes at 115200 FOUND?, Andrew Kohlsmith
Simple I/O Coldfire 5235 Application, Stefano Caioli
- Re: Simple I/O Coldfire 5235 Application, Carlos Manuel Duclos Vergara
RAM usage ...size problem, Sijoy Cherian
- RE: RAM usage ...size problem, Friedrich, Lars
  - Re: RAM usage ...size problem, Sijoy Cherian
Footprint..., T Satyanarayana-A12694
- Re: Footprint..., Greg Ungerer
Replacing serial driver, Valdemar
- Re: Replacing serial driver, Greg Ungerer
- Re: Replacing serial driver, Andrew Kohlsmith
- Re:Replacing serial driver, Valdemar
  - Re: Re:Replacing serial driver, Andrew Kohlsmith
- RE: Re:Replacing serial driver, Friedrich, Lars
SnapGear 3.3.0 and OpenSSL, Reiner K. Kappenberger
supervisor mode in coldfire, Nicolas Morin
- Re: supervisor mode in coldfire, Carlos Manuel Duclos Vergara
- Re: supervisor mode in coldfire, Andrew Kohlsmith
  - RE: supervisor mode in coldfire, Nicolas Morin
    - Re: supervisor mode in coldfire, Andrew Kohlsmith
    - RE: supervisor mode in coldfire, Carlos Manuel Duclos Vergara
how to condense net-snmp?, 郭正康
- Re: how to condense net-snmp?, Patrice Kadionik
alternative idea for plugins under armnommu, Thomas Eschenbacher
- Re: alternative idea for plugins under armnommu, Chris Gray
  - Re: alternative idea for plugins under armnommu, Jamie Lokier
  - Re: alternative idea for plugins under armnommu, Thomas Eschenbacher
plugins under armnommu, Thomas Eschenbacher
Spurious interrupt 4535, Suresh Steven Veigas
- Re: Spurious interrupt 4535, Greg Ungerer
Re: Anyone bootup uClinux on ppc405(XUPV2P)?, Haofeng Kou
uClinux on platform with MMU, Lei Sun
Problem with ucd-SNMP (SET), Sandro M
error while compiling uClibc - __NR_lchown&In-Reply-To=, Harald Küthe
error while compiling uClibc - __NR_lchown, Alexander Roos
Re: patch: coldfire stack alignment, Greg Ungerer
- Re: patch: coldfire stack alignment, Stuart Hughes
QSPI Port Interfacing with MAX1230 ADC, Jeff Szielenski
customizing uClinux / looking for help, Paolo Sacchetto
- Re: customizing uClinux / looking for help, Andrew Kohlsmith
  - Re: customizing uClinux / looking for help, Glenn Henshaw
starting with uClinix, Sergio González
- Re: starting with uClinix, Raúl Sánchez Siles
- Sigma Designs (was Re: starting with uClinix), Jamie Lokier
  - Re: Sigma Designs (was Re: starting with uClinix), Phil Sutter
    - Re: Sigma Designs (was Re: starting with uClinix), Sergio González
    - Re: Sigma Designs (was Re: starting with uClinix), Andrew Kohlsmith
    - Re: Sigma Designs (was Re: starting with uClinix), Jamie Lokier
  - Re: Sigma Designs (was Re: starting with uClinix), Greg Ungerer
    - Re: Sigma Designs (was Re: starting with uClinix), Jamie Lokier
    - Re: Sigma Designs (was Re: starting with uClinix), Greg Ungerer
UART missing bytes at 115200, Jordan Fuerst
- RE: UART missing bytes at 115200, Gavin Lambert
- Re: UART missing bytes at 115200, Greg Ungerer
- RE: UART missing bytes at 115200, Jordan Fuerst
- RE: UART missing bytes at 115200, Jordan Fuerst
  - Re: UART missing bytes at 115200, Greg Ungerer
    - Re: UART missing bytes at 115200, Erwin Authried
- RE: UART missing bytes at 115200, Jordan Fuerst
  - Re: UART missing bytes at 115200, Greg Ungerer
    - RE: UART missing bytes at 115200, Jordan Fuerst
    - Re: UART missing bytes at 115200, Greg Ungerer
    - RE:UART missing bytes at 115200->non-x86 RT extensions, NZG
- RE: UART missing bytes at 115200, Friedrich, Lars
- RE: UART missing bytes at 115200, Jordan Fuerst
  - Re: UART missing bytes at 115200, Greg Ungerer
- RE: RE:UART missing bytes at 115200, Jordan Fuerst
  - Re: RE:UART missing bytes at 115200, NZG
Re: HELP! appWeb on Coldfire, Michael O'Brien
- Re: HELP! appWeb on Coldfire, Francesco
Re: ARM9 and uCLinux., xavier.montagne
- Re: ARM9 and uCLinux., Hector Oron
  - Re: ARM9 and uCLinux., Raúl Sánchez Siles
    - Re: ARM9 and uCLinux., Hector Oron
- Re: ARM9 and uCLinux., Raúl Sánchez Siles
  - Re: ARM9 and uCLinux., xavier.montagne
  - Re: ARM9 and uCLinux., vince
RE: Loading a file from inside a Loadable Module inkernel space ?, Friedrich, Lars
multi-threading services in uclinux, tom gogh
- Re: multi-threading services in uclinux, Jamie Lokier
Dropbear Patch for 2.6 kernel, Robin Getz
- RE: Dropbear Patch for 2.6 kernel, Daniel Alomar
- Re: Dropbear Patch for 2.6 kernel, Greg Ungerer
Re: Booting fails after "freeing int memory", Greg Ungerer
- Re: Booting fails after "freeing int memory", S. Schmitt
  - Re: Booting fails after "freeing int memory", Greg Ungerer
Re: Error in adding new ARM Board into uCLinux!, Greg Ungerer
- Re: Error in adding new ARM Board into uCLinux!, Tao Wang
  - Re: Error in adding new ARM Board into uCLinux!, Greg Ungerer
    - Re: Error in adding new ARM Board into uCLinux!, Tao Wang
    - Re: Error in adding new ARM Board into uCLinux!, Greg Ungerer
    - smbmonut, umesh
    - Re: smbmonut, umesh
    - Re: smbmonut, Heiko Degenhardt
    - Re: smbmonut, umesh
    - Re: smbmonut, Heiko Degenhardt
    - Re: smbmonut, umesh
    - Re: smbmonut, Heiko Degenhardt
- Loading a file from inside a Loadable Module in kernel space ?, Terje Nilsen
  - RE: Loading a file from inside a Loadable Module inkernel space ?, Terje Nilsen
  - Re: Loading a file from inside a Loadable Module in kernel space ?, David Howells
Re: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Greg Ungerer
- Re: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Stuart Hughes