|
|
November 30, 2005
- Re: MTD, physmap.c and kernel 2.6, Erwin Authried
- Re: ARM9 and uCLinux., Chris Gray
- Re: ARM9 and uCLinux., Raúl Sánchez Siles
- Re: ARM9 and uCLinux., xavier.montagne
- telnetd in 2.6 [SOLVED!!!], Daniel Alomar
- RE: RE: port of uclinux, Daniel Alomar
- RE: MTD, physmap.c and kernel 2.6, Daniel Alomar
- RE: port of uclinux, Zouhair AOUAINI
- MTD, physmap.c and kernel 2.6, Stefano Caioli
- Re: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Stuart Hughes
- Re: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Stuart Hughes
- How to use bridge in uClinux, kanhu
- ARM9 and uCLinux., Raúl Sánchez Siles
- Re: patch: coldfire stack alignment, Stuart Hughes
- Error in adding new ARM Board into uCLinux!, Tao Wang
- Re: Booting fails after "freeing int memory", S. Schmitt
- RE: Behaviour f telnetd also in previous release, Daniel Alomar
- Re: R: patch: coldfire stack alignment, Greg Ungerer
- RE: Behaviour f telnetd also in previous release, Daniel Alomar
- Re: [uClinux-dev] [Fwd: Patch to include /dev/gpio node], Paul Hartke
- No luck building X for ARM., David Thomas
- Re: Application Stack Sizes, Greg Ungerer
- Re: [patch] NOMMU and MicroBlaze gdb/gdbserver, Greg Ungerer
- Re: [Fwd: [microblaze-uclinux] Patch to include /dev/gpio node], Greg Ungerer
November 29, 2005
- [PATCH 2/2] Handle TIF_RESTORE_SIGMASK for i386, David Howells
- [PATCH 1/2] Handle TIF_RESTORE_SIGMASK for FRV, David Howells
- [PATCH 2/2] FRV: Improve signal handling, David Howells
- [PATCH 1/2] FRV: Fix FRV signal handling, David Howells
- Re: [Fwd: [microblaze-uclinux] Patch to include /dev/gpio node], John Williams
- Re: Anyone bootup uClinux on ppc405(XUPV2P)?, John Williams
- Bluetooth hardware for uClinux, Andrew Kohlsmith
- [PATCH 3/3] FRV: Make futex code compilable on nommu [try #2], David Howells
- RE: Question about UCD-SNMP agent (mib2c tool), Arthur Shipkowski
- Re: Behaviour f telnetd also in previous release, NZG
- Re: [uClinux-dev] [Fwd: Patch to include /dev/gpio node], Paul Hartke
- Behaviour f telnetd also in previous release, Daniel Alomar
- Re: USB support in uclinux, Rahul Tank
- Telnetd on uclinux-dist (20051014) and kernel 2.6, Daniel Alomar
- Re: [PATCH 2/3] NOMMU: Make SYSV IPCSHMuseramfsfacilities on NOMMU, David Howells
- HELP! appWeb on Coldfire, Sandro M
- smbmount, kernel 2.0, compilation failes, Alexander Roos
- RE: [PATCH 2/3] NOMMU: Make SYSV IPCSHMuseramfsfacilities on NOMMU, terje.nilsen
- Re: R: patch: coldfire stack alignment, Bernardo Innocenti
- R: patch: coldfire stack alignment, Tarani, Andrea
- RE: USB support in uclinux, Daniel Alomar
- USB support in uclinux, Rahul Tank
- RE: (no subject), Daniel Alomar
- RE: [PATCH 2/3] NOMMU: Make SYSV IPCSHMuseramfsfacilities on NOMMU, Daniel Alomar
- Anyone bootup uClinux on ppc405(XUPV2P)?, Haofeng Kou
November 28, 2005
- POSIX IPC, terje.nilsen
- (no subject), Terje Nilsen
- RE: [PATCH 2/3] NOMMU: Make SYSV IPC SHMuseramfsfacilities on NOMMU, Terje Nilsen
- Re: patch: coldfire stack alignment, Andrew Kohlsmith
- Re: 2.4.27-uc1 timer queue question, Sascha Smejkal
- last line in the console, devi
- Re: patch: coldfire stack alignment, Stuart Hughes
- Porting uClinux for new board, Zouhair AOUAINI
- RE: [PATCH 2/3] NOMMU: Make SYSV IPC SHM useramfsfacilities on NOMMU, Daniel Alomar
- RE: [PATCH 2/3] NOMMU: Make SYSV IPC SHM use ramfsfacilities on NOMMU, Terje Nilsen
- Re: [patch] NOMMU and MicroBlaze gdb/gdbserver, Robin Getz
- Re: additional mount causes freeze, Patrice Kadionik
- RE: How to 'su' with Tinylogin, Friedrich, Lars
- Re: Application Stack Sizes, Robin Getz
- RE: System V IPC ..., Daniel Alomar
- Re: System V IPC ..., Greg Ungerer
- RE: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Gavin Lambert
- Re: [patch] NOMMU and MicroBlaze gdb/gdbserver, Greg Ungerer
- additional mount causes freeze, Alexander Roos
- Re: Application Stack Sizes, Greg Ungerer
- Re: BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Greg Ungerer
- Re: Booting fails after "freeing int memory", Greg Ungerer
- Re: patch: coldfire stack alignment, Greg Ungerer
- Re: Patch to include/dev/gpio node, Greg Ungerer
- RE: Patch to include/dev/gpio node, Gavin Lambert
- Re: [Fwd: [microblaze-uclinux] Patch to include /dev/gpio node], Greg Ungerer
November 25, 2005
- Doubt with on-board Switch, G r a n z o t o
- Re: Booting fails after "freeing int memory", Clemens Arth
- Re: SCHED_RR problem (noticed on microblaze), Claudio Lanconelli
- Re: patch: coldfire stack alignment, Andrew Kohlsmith
- Re: patch: coldfire stack alignment, Andrew Kohlsmith
- Booting fails after "freeing int memory", s . s-c-h-m-i-t-t
- RE: SCHED_RR problem (noticed on microblaze), Falk Brettschneider
- patch: coldfire stack alignment, Stuart Hughes
- Code coverage tool, Nicolas Ferre
- Samba comilation error on new uclinux-dist., Daniel Alomar
- Samba Client, Mike Lavender
November 24, 2005
- Re: 2.4.27-uc1 timer queue question, Erwin Authried
- 2.4.27-uc1 timer queue question, Sascha Smejkal
- SCHED_RR problem (noticed on microblaze), Falk Brettschneider
- Re: KS8695 kernel hangs after "Freeing init memory", Clemens Arth
- Re: Reducing the memory footprint of 2.6.14.2-hsc0 for ARM nommu, Shaun Jackman
- BINFMT_FLAT: Loading file: /etc/rc.d/rc.local, Stuart Hughes
- Question about UCD-SNMP agent (mib2c tool), Sandro M
- Re: current cvs-HEAD of kernel and microblaze doesn't start up, Falk Brettschneider
- current cvs-HEAD of kernel and microblaze doesn't start up, Falk Brettschneider
- [PATCH] ARM Integrator support for 2.6.14-hsc0, Stelian Pop
- RE: daemons in uClinux, Preethi
- RE: daemons in uClinux->pthreads, Friedrich, Lars
- RE: daemons in uClinux, Friedrich, Lars
- Re: KS8695 kernel hangs after "Freeing init memory", Greg Ungerer
- Re: daemons in uClinux->pthreads, John Williams
- Re: Reducing the memory footprint of 2.6.14.2-hsc0 for ARM nommu, Greg Ungerer
- Re: m68knommu find_next_zero_bit() bug fix, Greg Ungerer
- get currenttime in milliseconds unit on uClinux, sasin janpungtong
- Re: Parity Check in serial Communication, Greg Ungerer
November 23, 2005
- Reducing the memory footprint of 2.6.14.2-hsc0 for ARM nommu, Shaun Jackman
- Re: (dcc_reg): Make the declaration static.[PATCH], Carlos Manuel Duclos Vergara
- (dcc_reg): Make the declaration static.[PATCH], Shaun Jackman
- Re: daemons in uClinux->pthreads, David McCullough
- Filesystem in RAM, Jai Dhar
- Re: Ignoring the parity check for input data, Sijoy Cherian
- Re: [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs, David Howells
- Re: [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs, David Howells
- Re: [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs, Linus Torvalds
- [PATCH 3/3] FRV: Implement futex operations for FRV, David Howells
- [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs, David Howells
- [PATCH 2/3] NOMMU: Make SYSV IPC SHM use ramfs facilities on NOMMU, David Howells
- Re: m68knommu find_next_zero_bit() bug fix, Michael Leslie
- Re: init isn't starting - what's wrong?, Alexander Roos
- Ignoring the parity check for input data, Sijoy Cherian
- Re: arm-uclinux 3.4 compile problem, Lance Spaulding
- Re: Atmel timer interrupt fix [PATCH], Shaun Jackman
- [PATCH 3/3] FRV: Make futex code compilable on nommu, David Howells
- [PATCH 1/3] FRV: Make the FRV arch work again, David Howells
- [PATCH 2/3] FRV: Clean up bootmem allocator's page freeing algorithm, David Howells
- Parity Check in serial Communication, Sijoy Cherian
- Re: daemons in uClinux->pthreads, NZG
- KS8695 kernel hangs after "Freeing init memory", Clemens Arth
- Re: daemons in uClinux, David McCullough
- Re: Modbus RTU Implimentation on uClinux, Sijoy Cherian
- daemons in uClinux, Rahul tank
- Size Differs, kanhu
- m68knommu find_next_zero_bit() bug fix, Sascha Smejkal
- RE: arm-uclinux 3.4 compile problem, Friedrich, Lars
- Re: busybox tar fork failed, Suresh Steven Veigas
- Re: Regarding mounting CRAMFS and JFFS2 filesystems onuClinux on a single flash chip!, Suresh Steven Veigas
- Atmel timer interrupt fix [PATCH], Shaun Jackman
November 22, 2005
- Re: Snapgear 3.3.0: Problem building 2.6 kernel with glibc, Greg Ungerer
- Re: Snapgear 3.3.0: Problem building 2.6 kernel with glibc, s . s-c-h-m-i-t-t
- busybox tar fork failed, Jate Sujjavanich
- Re: ColdFire interrupt priorities/levels, NZG
- BOA + SSL, Francesco
- Re: arm-uclinux 3.4 compile problem, Erwin Authried
- Re: arm-uclinux 3.4 compile problem, Lance Spaulding
- Re: ColdFire interrupt priorities/levels, Andrew Kohlsmith
- Re: Regarding mounting CRAMFS and JFFS2 filesystems on uClinux on a single flash chip!, Erwin Authried
- Regarding mounting CRAMFS and JFFS2 filesystems on uClinux on a single flash chip!, Sreecharan Sivadevuni
- RE: Net-SNMP deamon's memory usage?, Doug Kehn
- RE: Modbus RTU Implimentation on uClinux, Friedrich, Lars
- Re: init isn't starting - what's wrong?, Alexander Roos
- Re: Modbus RTU Implimentation on uClinux, Sijoy Cherian
- Re: Snapgear 3.3.0: Problem building 2.6 kernel with glibc, Greg Ungerer
- Re: Snapgear 3.3.0: Problem building 2.6 kernel with glibc, S. Schmitt
- RE: Net-SNMP deamon's memory usage?, Friedrich, Lars
- RE: Modbus RTU Implimentation on uClinux, Friedrich, Lars
- RE: arm-uclinux 3.4 compile problem, Friedrich, Lars
- Re: pipe issues, Heiko Degenhardt
- Net-SNMP deamon's memory usage?, Tao Wang
- Re: Snapgear 3.3.0: problem compiling glibc, Greg Ungerer
- RE: How to 'su' with Tinylogin, Daniel Alomar
- Re: ColdFire interrupt priorities/levels, Greg Ungerer
- Re: Snapgear 3.3.0: Problem building 2.6 kernel with glibc, Doug Kehn
- uClinux on Digilent XUPV2P board with ppc405 core, Haofeng Kou
- Re: pipe issues, Mike Blue
- Re: pipe issues, Greg Ungerer
- Re: pipe issues, Mike Blue
- Re: uClinux for Digilent XUPV2P board boot from flash, John Williams
- uClinux for Digilent XUPV2P board boot from flash, Haofeng Kou
- Re: pipe issues, Greg Ungerer
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Ungerer
- ColdFire interrupt priorities/levels, Andrew Kohlsmith
- RE: Compiling 2.6.14-hsc0 against 2.6.14.2 [PATCH], Hyok S. Choi
- Re: Compiling 2.6.14-hsc0 against 2.6.14.2 [PATCH], Shaun Jackman
November 21, 2005
- RE: Compiling 2.6.14-hsc0 against 2.6.14.2 [PATCH], Hyok S. Choi
- Re: MicroBlaze uClinux "Warning: unable to open an initial console.", David McCullough
- Re: MicroBlaze uClinux "Warning: unable to open an initial console.", Haofeng Kou
- MicroBlaze uClinux "Warning: unable to open an initial console.", Haofeng Kou
- Re: at91 timer interrupt, Shaun Jackman
- MicroBlaze uClinux compile error: CONFIG_XILINX_FLASH_START, Haofeng Kou
- pipe issues, Mike Blue
- Rename verify_area to access_ok in serial_atmel.c [PATCH], Shaun Jackman
- Compiling 2.6.14-hsc0 against 2.6.14.2 [PATCH], Shaun Jackman
- Re: How to 'su' with Tinylogin, Chris Gray
- Re: at91 timer interrupt, Shaun Jackman
- arm-uclinux 3.4 compile problem, Lance Spaulding
- Modbus RTU Implimentation on uClinux, Sijoy Cherian
- How to set Boa Auth password file?, Sandro M
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Sulfid
- SSL question!, Francesco Andrisani
- R: Problem with install and run Boa webserveronuClinux(Kernel version 2.4.24), Francesco Andrisani
- shared library question: reposting, A D
- Re: strip, Sijoy Cherian
- Snapgear 3.3.0: Problem building 2.6 kernel with glibc, S. Schmitt
- RE: How to 'su' with Tinylogin, Friedrich, Lars
- pthread_join problem, Tommy Tang
- Re: 2.4.31 profiling (kmem_cache_* questions), Andrew Kohlsmith
- Re: 2.4.31 profiling (kmem_cache_* questions), John Williams
- uClinux for S3C4510B bug report and fix, Tao Wang
- Re: 2.4.31 profiling (kmem_cache_* questions), Andrew Kohlsmith
- Re: 2.4.31 profiling (kmem_cache_* questions), David McCullough
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Ungerer
- 2.4.31 profiling (kmem_cache_* questions), Andrew Kohlsmith
November 18, 2005
- Re: Snapgear 3.3.0: problem compiling glibc, s . s-c-h-m-i-t-t
- creating ram file for uCliux-dist-20030522 & 20041215, Deepu d
- Re: Building RAM image for Coldfire uC5282, Michael Leslie
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Clemens Arth
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Sulfid
- RE: serial crash when console is moved. FIXED!, Jordan Fuerst
- RE: problem with restart of pthread, Falk Brettschneider
- RE: problem with restart of pthread, Falk Brettschneider
- RE: How to 'su' with Tinylogin, Friedrich, Lars
- Re: local single-platform version of uclinux_dist, Falk Brettschneider
- local single-platform version of uclinux_dist, Falk Brettschneider
- RE: problem with restart of pthread, Falk Brettschneider
- RE: How uclinux detect the flash chip?, Erwin Authried
- Re: How uclinux detect the flash chip?, Greg Ungerer
- Re: 20050906 has broken busybox -> no daemon() ??, Greg Ungerer
- RE: How uclinux detect the flash chip?, Daniel Alomar
- Re: How uclinux detect the flash chip?, Greg Ungerer
- Re: Nested interrupts on Coldfire, Greg Ungerer
- Re: Snapgear 3.3.0: problem compiling glibc, Greg Ungerer
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Ungerer
- shared library silent failure, A D
- How to 'su' with Tinylogin, Tao Wang
November 17, 2005
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Clemens Arth
- Re: Re: Problem with GPRS modem!, amol sukerkar
- RE: problem with restart of pthread, Friedrich, Lars
- Re: KendinMicrel KS8695 Network Interface causes Kernel crash..., Greg Ungerer
- problem with restart of pthread, Falk Brettschneider
- RE: thread switching response time, Friedrich, Lars
- RE: thread switching response time, Falk Brettschneider
- Re: Snapgear 3.3.0: problem compiling glibc, Doug Kehn
- ucfront-gcc tool and I64 problems, Greg Sulfid
- RE: thread switching response time, Friedrich, Lars
- thread switching response time, Falk Brettschneider
- RE: Nested interrupts on Coldfire, Friedrich, Lars
- RE: Problem with install and run Boa webserveronuClinux (Kernel version 2.4.24), hennerich
- RE: Nested interrupts on Coldfire, Daniel Alomar
- RE: How to use SSL with BOA, Tao Wang
- RE: How to use SSL with BOA, Friedrich, Lars
- How to use SSL with BOA, Tao Wang
- RE: How uclinux detect the flash chip?, Daniel Alomar
- RE: KendinMicrel KS8695 Network Interface causes Kernelcrash..., Friedrich, Lars
- Re: How uclinux detect the flash chip?, Suresh Steven Veigas
- KendinMicrel KS8695 Network Interface causes Kernel crash..., Clemens Arth
- RE: How uclinux detect the flash chip?, Daniel Alomar
- Re: How uclinux detect the flash chip?, Greg Ungerer
- How uclinux detect the flash chip?, Daniel Alomar
- Re: Nested interrupts on Coldfire, Greg Ungerer
- Re: init isn't starting - what's wrong?, Alexander Roos
- Re: PPPD problem, Tommy Tang
- Re: PPPD problem, David McCullough
- Re: PPPD problem, Tommy Tang
- Re: PPPD problem, David McCullough
- Re: PPPD problem, Tommy Tang
- Re: PPPD problem, David McCullough
- Netcard probleam, 肖 dragon
- Re: PPPD problem, Tommy Tang
- Re: [PATCH] linux-2.6.14-hsc0 ARM MPU/noMMU, Shaun Jackman
November 16, 2005
- Re: Snapgear on MIPS, David McCullough
- Re: port of uclinux, David McCullough
- Re: init isn't starting - what's wrong?, David McCullough
- Re: strip, David McCullough
- Snapgear on MIPS, Mattias Rönnblom
- Re: 5235evb questions, NZG
- port of uclinux, Zouhair AOUAINI
- Re: using objdump to disassemble binaries [solved], Michal Skuza
- Re: PPPD problem, Erwin Authried
- Re: PPPD problem, GPN
- Problem with BOA + SSl compiling on uClinux, Francesco
- kernel mode PPPOE, Tommy Tang
- P&E BDM connection lost !, Terje Nilsen
- How to decrese the size of lpthread, Sijoy Cherian
- Building RAM image for Coldfire uC5282, Francesco
- RE: Problem with install and run Boa web serveronuClinux (Kernel version 2.4.24), Francesco
- Re: PPPD problem, Tommy Tang
- RE: Finding Address of .bss .text and .data, Friedrich, Lars
- Re: PPPD problem, Erwin Authried
- Re: Problem with watchdog on M5282evb, Sandro M
- Re: PPPD problem, Tommy Tang
- strip, Sijoy Cherian
- Re: init isn't starting - what's wrong?, Alexander Roos
- RE: Big binary file size, Daniel Alomar
- Re: PPPD problem, Erwin Authried
- Re: Big binary file size, M Ranga Swami Reddy
- Big binary file size, jamal
- Re: Mount JFFS2 on /dev/mtdblock, Tao Wang
- Re: PPPD problem, Tommy Tang
- Re: Mount JFFS2 on /dev/mtdblock, Suresh Steven Veigas
- Re: Snapgear 3.3.0: NEW: problem compiling uclibc, Greg Ungerer
- Re: Mount JFFS2 on /dev/mtdblock, Greg Ungerer
- how to make zImage in discrete steps?, Zhen Wang
- Re: PPPD problem, Tommy Tang
- Re: large allocations with page_alloc2, David McCullough
- About DM9000 network chip support, Huei-Ting Yu
- RE: Mount JFFS2 on /dev/mtdblock, Gavin Lambert
- Re: PPPD problem, wh one23
- Re: large allocations with page_alloc2, Lance Spaulding
- Re: serial crash when console is moved., Greg Ungerer
- Re: Mount JFFS2 on /dev/mtdblock, Tao Wang
- RE: Mount JFFS2 on /dev/mtdblock, Gavin Lambert
- Re: Mount JFFS2 on /dev/mtdblock, Greg Ungerer
- PPPD problem, Tommy Tang
- Re: large allocations with page_alloc2, David McCullough
- large allocations with page_alloc2, Lance Spaulding
- Re: Mount JFFS2 on /dev/mtdblock, Tao Wang
November 15, 2005
- Finding Address of .bss .text and .data, Cameron Barfield
- init isn't starting - what's wrong?, Alexander Roos
- serial crash when console is moved., Jordan Fuerst
- RE: Problem with install and run Boa web serveronuClinux (Kernel version 2.4.24), hennerich
- Re: 5235evb questions, Michael Silva
- RE: mtd under kernel 2.6.x. I need some explanationplease.., Daniel Alomar
- Re: Mount JFFS2 on /dev/mtdblock, Suresh Steven Veigas
- Mount JFFS2 on /dev/mtdblock, Tao Wang
- Re: mtd under kernel 2.6.x. I need some explanation please.., Claudio Lanconelli
- Mandrake 9.2 dev system for snapgear package?, S. Schmitt
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Digilent, Haofeng Kou
- PPPOE problem in uclinux, Tommy Tang
- Re: 5235evb questions, Greg Ungerer
- Re: Digilent, John Williams
November 14, 2005
- RE: Kernel hangs after mounting root, Gavin Lambert
- Re: Kernel hangs after mounting root, David McCullough
- RAM Size problem, Sijoy Cherian
- 5235evb questions, Michael Silva
- Proper size of uclibc BUFSIZ with no-mmu, Robin Getz
- Re: ide suport, xavier.montagne
- RE: Problem with install and run Boa web server onuClinux (Kernel version 2.4.24), Francesco
- RE: Problem with install and run Boa web server onuClinux (Kernel version 2.4.24), hennerich
- Problem with install and run Boa web server on uClinux (Kernel version 2.4.24), Francesco
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: System V IPC with nommu under 2.6, David Howells
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Fragmented RAM, H. Holfelder
- Re: Kernel hangs after mounting root, H. Holfelder
- Re: ide suport, Måns Brorsson
- Re: Snapgear 3.3.0: NEW: problem compiling uclibc, s . s-c-h-m-i-t-t
- Nested interrupts on Coldfire, Daniel Alomar
- RE: System V IPC with nommu under 2.6, Daniel Alomar
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Re: uClinux-dist-20051014 build FAILS, Greg Ungerer
- Re: Snapgear 3.3.0: NEW: problem compiling uclibc, Greg Ungerer
- Re: 2.6.14-uc0: Issues with modules, Greg Ungerer
- xfree86, 张方辉
- Re: ucfront causes memory allocation error, David McCullough
- Re: Flat shared libs, C++, pthreads, John Williams
November 13, 2005
- Re: Flat shared libs, C++, pthreads, Pauli
- Re: Flat shared libs, C++, pthreads, John Williams
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Static library not linking, David McCullough
- Re: How to use JFFS2 as rootfs in ARM7TDMI!, Greg Holdren
- Static library not linking, Sijoy Cherian
- Re: flag to build static lib, Sijoy Cherian
- Re: ps/2 mouse moves very slowly, Paul Hartke
November 11, 2005
- Flat shared libs, C++, pthreads, Bernd Schmidt
- RV: Ftp server to uClinux, Karin Marroquin
- (no subject), Karin Marroquin
- 2.6.14-uc0: Issues with modules, Daniel Alomar
- Re: Kernel hangs after mounting root, Alexander Roos
- Shared Memory not linking while cross compiling, Sijoy Cherian
- Re: Kernel hangs after mounting root, H. Holfelder
- Re: ide suport, xavier.montagne
- web server with Python?, Andrea Bonini
- Switch hangs up while ftp trasmittion from board to PC, misha
- ps/2 mouse moves very slowly, Hema K
- Re: Problem with uClinux applications, Peter
November 10, 2005
- Re: Kernel hangs after mounting root, Thomas Goor
- Re: ide suport, Måns Brorsson
- Re: ide suport, xavier.montagne
- Re: Kernel hangs after mounting root, Alexander Roos
- ide suport, Måns Brorsson
- c++ question, Sascha Smejkal
- Re: Kernel hangs after mounting root, H. Holfelder
- Re: Problem with uClinux applications, Francesco
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Problem with uClinux, Suresh Steven Veigas
- Re: Re: Problem with GPRS modem!, Erwin Authried
- [PATCH] linux-2.6.14-hsc0 ARM MPU/noMMU, Hyok S. Choi
- Re: Problem with uClinux applications, Peter
- Re: direct register access in the 5275, Greg Ungerer
- Re: Re: Problem with GPRS modem!, amol sukerkar
November 09, 2005
- Re: Kernel hangs after mounting root, David McCullough
- Re: Re: Problem with GPRS modem!, Erwin Authried
- Re: Problem with GPRS modem!, amol sukerkar
- [2.4.31-uc0 on 5272] dhcpcd-new not functioning?, Aaron Manning
- iptables support, kernel get corrupted, yuvraj dodia
- Re: ColdFire FlexCAN can4linux for testing, Michael Leslie
- Re: IP Forwarding, adimbox-uclinux
- Problem with uClinux applications, Francesco
- Problem with uClinux, Francesco
- Problem with GPRS modem!, amol sukerkar
- Re: Problem with watchdog on M5282evb, NZG
- Problem with watchdog on M5282evb, Sandro M
- Re: Kernel hangs after mounting root, H. Holfelder
- IP Forwarding, srinivas naga vutukuri
- Re: IP Forwarding, David McCullough
- IP Forwarding, adimbox-uclinux
- arm-linux-gcc and Hardware FP error?, Tyler Li
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Kernel hangs after mounting root, H. Holfelder
- direct register access in the 5275, Jordan Fuerst
- RE: M68K Compiler/Binutils - Problems with relocations, Paul McGougan
November 08, 2005
- Re: Coldfire 5235EVB board, Greg Ungerer
- Re: Flatfs performance (gffs RFC), David McCullough
- Re: M68K Compiler/Binutils - Problems with relocations, David McCullough
- Re: 20050906 has broken busybox -> no daemon() ??, NZG
- Coldfire 5235EVB board, Michael Silva
- Re: Kernel hangs after mounting root, Thomas Goor
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: 20050906 has broken busybox -> no daemon() ??, Geoffrey Wossum
- Re: c++ problem undefined reference, Sascha Smejkal
- RE: Fragmented RAM, Friedrich, Lars
- ColdFire FlexCAN can4linux for testing, Heinz-Jürgen Oertel
- Re: c++ problem undefined reference, Sascha Smejkal
- Re: 20050906 has broken busybox -> no daemon() ??, Andrew Kohlsmith
- Re: MCF5282 and FlexCAN in Can4Linux, Andrew Kohlsmith
- Re: M68K Compiler/Binutils - Problems with relocations, Bernd Schmidt
- Flatfs performance (gffs RFC), Marshall
- Re: Kernel hangs after mounting root, David McCullough
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Kernel hangs after mounting root, David McCullough
- Re: Kernel hangs after mounting root, Alexander Roos
- Re: Fragmented RAM, xavier.montagne
- MTD partitions with multiple erase regions, Erwin Authried
- Does rp-pppoe work on uClinux?, Zhang, Sonic
- Re: Digilent, John Williams
- RE: mtd under kernel 2.6.x. I need someexplanationplease.., Daniel Alomar
- Re: 20050906 has broken busybox -> no daemon() ??, Greg Ungerer
- Digilent, Haofeng Kou
- Re: MCF5282 and FlexCAN in Can4Linux, Phil Wilshire
- Hi, all, still about the leek memory detect tool, Jerry (Peng) Yang
- Re: IPSec and uClinux, John Williams
- Re: mtd under kernel 2.6.x. I need some explanationplease.., jcr
- Re: IPSec and uClinux, adimbox-uclinux
- Re: MCF5282 and FlexCAN in Can4Linux, Michael Leslie
November 07, 2005
- IPSec and uClinux, adimbox-uclinux
- Re: MCF5282 and FlexCAN in Can4Linux, Greg Ungerer
- Re: MCF5282 and FlexCAN in Can4Linux, Heinz-Jürgen Oertel
- MCF5282 and FlexCAN in Can4Linux, Andrew Kohlsmith
- RE: Fragmented RAM, Gavin Lambert
- RE: Board Specific Initialization Code, Mike Lavender
- Re: Kernel hangs after mounting root, Alexander Roos
- Fragmented RAM, H. Holfelder
- Re: Kernel hangs after mounting root, H. Holfelder
- RE: Which leek memory detect tool is good in embedded linux?, Jerry (Peng) Yang
- Which leek memory detect tool is good in embedded linux?, Jerry (Peng) Yang
- mtd under kernel 2.6.x. I need some explanation please.., Daniel Alomar
- MTD: Flash write - warning, Suresh Steven Veigas
- Re: Board Specific Initialization Code, Greg Ungerer
November 04, 2005
- Re: Flatfs performance (gffs RFC), Phil Wilshire
- Re: Problem Porting a board, H. Holfelder
- Re: Problem Porting a board, Alexander Roos
- Re: Flatfs performance (gffs RFC), David McCullough
- Re: Problem Porting a board, Thomas Goor
- Flatfs performance (gffs RFC), Guilherme Marshall
- uClinux-dist/user... snmpd or net-snmp ?, Hector Oron
- How to use my own cross compiler on uClinux ?, Hector Oron
- Re: Embedded Linux for x86 platforms, David McCullough
- Re: Embedded Linux for x86 platforms, Ayoub
- Re: Embedded Linux for x86 platforms, David McCullough
- Embedded Linux for x86 platforms, Ayoub Zaki-Meyer
- gprs dial problem, 李磊
- uclinux on Conexant ARM9 CX82100, iTAbhiyanta
- Re: patch for binfmt_flat.c and flat.c to supportversion4, Mike Blue
- 20050906 has broken busybox -> no daemon() ??, Andrew Kohlsmith
- Re: patch for binfmt_flat.c and flat.c to supportversion4, David McCullough
- Re: patch for binfmt_flat.c and flat.c to supportversion4, Mike Blue
- Re: ÍøÒ×ÓÊÏä×Ô¶¯»Ø¸´:RE: [uClinux-dev] patch for binfmt_flat.c and flat.c to supportversion4, John Williams
November 03, 2005
- Re: mcfserial wait_until_sent() fix for non-5272, Greg Ungerer
- Re: patch for binfmt_flat.c and flat.c to support version4, David McCullough
- Re: Flatfs performance, David McCullough
- RE: ÍøÒ×ÓÊÏä×Ô¶¯»Ø¸´:RE: [uClinux-dev] patch for binfmt_flat.c and flat.c to supportversion4, Gavin Lambert
- RE: patch for binfmt_flat.c and flat.c to support version4, Gavin Lambert
- patch for binfmt_flat.c and flat.c to support version 4, Mike Blue
- Re: M68K Compiler/Binutils - Problems with relocations, Javier Cardona
- Flatfs performance, Guilherme Marshall
- Coldfire interrupt priorities in uClinux, NZG
- Re: Problem Porting a board, H. Holfelder
- Re: mcfserial wait_until_sent() fix for non-5272, Andrew Kohlsmith
- RE: M68K Compiler/Binutils - Problems with relocations, Thomas Ritter
- Re: Problem Porting a board, Thomas Goor
- Re: M68K Compiler/Binutils - Problems with relocations, David McCullough
- play program, devi
- RE: M68K Compiler/Binutils - Problems with relocations, Paul McGougan
- Re: Issues of latest uclinux-dist (20051014)., Greg Ungerer
- Board Specific Initialization Code, Mike Lavender
- Re: mcfserial wait_until_sent() fix for non-5272, Greg Ungerer
November 02, 2005
- RE: MMC drivers 2.6, Mike Lavender
- Re: MMC drivers 2.6, Mark Underwood
- RE: MMC drivers 2.6, Mark Underwood
- Re: Trying to get shared libraries to work, Pauli
- RE: MMC drivers 2.6, Mike Lavender
- RE: M68K Compiler/Binutils - Problems with relocations, Thomas Ritter
- Re: MMC drivers 2.6, NZG
- Trying to get shared libraries to work, Bernd Schmidt
- Re: Problem Porting a board, H. Holfelder
- Re: uclinux architecture, Raúl Sánchez Siles
- Re: inittab and shell commands, David McCullough
- Re: inittab and shell commands, Sandro M
- Re: FEC ioctl in 2.6, Greg Ungerer
- flag to build static lib, Por por
- RE: Is there a uclinux port for cirrus logic EDB7312Develpment kit, Merrifield, Steven (GE Infrastructure)
- Is there a uclinux port for cirrus logic EDB7312 Develpment kit, JUFAIL KAPOOR
- Re: "nostalgic": uClinux running from flash on a Palm IIIx, David McCullough
- linux-2.6.14-uc0 patch set released, Greg Ungerer
- FEC ioctl in 2.6, Mike Lavender
- Re: "nostalgic": uClinux running from flash on a Palm IIIx, Jim Davidson
- RE: MMC drivers 2.6, Mike Lavender
- Re: MMC drivers 2.6, Mark Underwood
- Re: MMC drivers 2.6, Mark Underwood
November 01, 2005
- RE: FW: Re[2]: brctl or bridging in 2.6 kernel, Jordan Fuerst
- Re: MMC drivers 2.6, NZG
- Re: MMC drivers 2.6, NZG
- Re: MMC drivers 2.6, Mark Underwood
- uclinux architecture, Pablo Silva
- Problem Porting a board, Alexander Roos
- Threads in romfs are running very slow., Jeppe Frandsen
- RE: M68K Compiler/Binutils - Problems with relocations, Gavin Lambert
- Re: M68K Compiler/Binutils - Problems with relocations, David McCullough
- M68K Compiler/Binutils - Problems with relocations, Paul McGougan
|
|