uclinux.devel (thread)

Problem with eth1, Ashok
Re: How do I turn off the Don't Fragment flag (2.6 kernel), John Dugan
Compile Errors on uCLinux, Timo Bruderek
- Re: Compile Errors on uCLinux, Paul G. Allen
binfmt_flat.c and multiple processes with the same executable file., Avila Mathieu
ARM7TDMI Support, Paul G. Allen
How do I turn off the Don't Fragment flag (2.6 kernel), John Dugan
Problem with PS, DMESG and IXP425 driver, G r a n z o t o
uClinux and Wifi ?, Jean Lee
- Re: uClinux and Wifi ?, Nicolas Ferre
  - RE: uClinux and Wifi ?, Daniel Alomar
    - Re: uClinux and Wifi ?, Nicolas Ferre
  - Re: uClinux and Wifi ?, Jean Lee
- Re: uClinux and Wifi ?, Erwin Authried
  - Re: uClinux and Wifi ?, Jean Lee
Wrong CLEANMARKER Position on MTD, Chen Zhigao
using objdump to disassemble binaries, Michal Skuza
- Re: using objdump to disassemble binaries, Stuart Hughes
- Re: using objdump to disassemble binaries, Maciej Witaszek
samba smbmount question, Robin Getz
Problem with tc, kanhu
elf2flt for arm not work, redice li
- RE: elf2flt for arm not work, Gavin Lambert
- RE: elf2flt for arm not work, redice li
USB OTG Driver, Abhijith K S
Hardware recommendation,, Andres Paglayan
mknod chmod and mkdir.. Where?, Jordan Fuerst
- Re: mknod chmod and mkdir.. Where?, NZG
Booting uClinux on SPARC V8, Matteo Zanella
- Re: Booting uClinux on SPARC V8, Greg Ungerer
mcf5206 2.4.31 blkmem/mmap issue?, Andrew Kohlsmith
- Re: mcf5206 2.4.31 blkmem/mmap issue?, Erwin Authried
Jffs2 space problem, Calò Massimo
- Re: Jffs2 space problem, NZG
  - Re: Jffs2 space problem, NZG
    - Re: Jffs2 space problem, Javier Herrero
    - JFFS2 checksum errors, NZG
    - Re: Jffs2 space problem, Greg Ungerer
- Re: Jffs2 space problem, Erwin Authried
  - Re: Jffs2 space problem, Greg Ungerer
    - Re: Jffs2 space problem, Erwin Authried
- Re: Jffs2 space problem, Greg Ungerer
  - R: Jffs2 space problem, Calò Massimo
- Re: Jffs2 space problem, mark . c . giacobbe
- Re: Jffs2 space problem, mark . c . giacobbe
5282 and USB, Daniel Alomar
Snapgear-3.3.0 ixp425_eth.o kernel panic, Stewart Heitmann
- Re: Snapgear-3.3.0 ixp425_eth.o kernel panic, Stewart Heitmann
my code should be in which layer?, chen
- Re: my code should be in which layer?, lio
- Re: my code should be in which layer?, Heinz-Jürgen Oertel
- RE: my code should be in which layer?, Friedrich, Lars
How to port uClinux to my own board ?, Hoang Nhat Nam
uclinux kernel ksize error., joson_zhang
- Re: uclinux kernel ksize error., David McCullough
Eraseall for MTD block devices, Suresh Steven Veigas
- Re: Eraseall for MTD block devices, NZG
  - Re: Eraseall for MTD block devices, Suresh Steven Veigas
    - Re: Eraseall for MTD block devices, Erwin Authried
    - RE: Eraseall for MTD block devices, Gavin Lambert
    - Re: Eraseall for MTD block devices, David McCullough
    - Re: Eraseall for MTD block devices, Suresh Steven Veigas
    - Re: Eraseall for MTD block devices, Erwin Authried
BootLoader : Where to start, Imran Shabbir
ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
  - Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
    - Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
    - Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, David McCullough
    - Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
    - Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, David McCullough
    - Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
Re: Modbus status, Andrew Kohlsmith
- Re: Modbus status, NZG
20041215 2.4.x elf support broken?, Andrew Kohlsmith
- Re: 20041215 2.4.x elf support broken?, Andrew Kohlsmith
  - Re: 20041215 2.4.x elf support broken?, Greg Ungerer
- Re: 20041215 2.4.x elf support broken?, David McCullough
68VZ328 ucdimm - linux-2.6.13, Stuart Hughes
console, devi
- Problems with telnetd in uClinux-test-20050808 and uClinux-test-20050906, Javier Herrero
  - Re: Problems with telnetd in uClinux-test-20050808 and uClinux-test-20050906, David McCullough
    - Re: Problems with telnetd in uClinux-test-20050808 and uClinux-test-20050906, Javier Herrero
Re: Fwd: GDB Armulator configure fails, Paul G. Allen
Scheduler Bug, Paul Romero
- Re: Scheduler Bug, David McCullough
compiling uClinux stop in "make user_only", niuxiangping716
- Re: compiling uClinux stop in "make user_only", David McCullough
- Re[1]: compiling uClinux stop in "make user_only", niuxiangping716
Re: XIP broken in 2.4.31-uc0 ? (fwd), Michael Leslie
- Re: XIP broken in 2.4.31-uc0 ? (fwd), Erwin Authried
  - Re: XIP broken in 2.4.31-uc0 ? (fwd), Erwin Authried
XIP broken in 2.4.31-uc0 ?, Erwin Authried
nanoX on tty7, sujatha
- Re: nanoX on tty7, Eric BENARD / Free
Booting from flash, kanhu
- RE: Booting from flash, Robert B. Williams
- Re: Booting from flash, vijai kumar
RE : RE: ARM940T : Calibrate Loop Delay, jerin
Problem with JFFS2 file system, Ashok
- Re: Problem with JFFS2 file system, Erwin Authried
  - RE: Problem with JFFS2 file system, Ashok
problem in __irq_svc, jerin
ARM940T : Calibrate Loop Delay, Devarshi
- RE: ARM940T : Calibrate Loop Delay, Friedrich, Lars
snapgear 2.4.x kernel and mainline, Abhijit Pradhan
- Re: snapgear 2.4.x kernel and mainline, David McCullough
Re: /var/log/messages: Enabling Response, Doug Kehn
- RE: Re: /var/log/messages: Enabling Response, Jate Sujjavanich
serial port driver and MTD <-> JFFS2 problem (kernel 2.6), boris-nikolov . koprinarov
senTec vendor patch, boris-nikolov . koprinarov
- Re: senTec vendor patch, Frieder Ferlemann
  - Re: senTec vendor patch, boris-nikolov . koprinarov
    - Re: senTec vendor patch, boris-nikolov . koprinarov
    - Re: senTec vendor patch, Greg Ungerer
/var/log/messages: How to enable, Paul Romero
- Re: /var/log/messages: How to enable, Doug Kehn
  - 8250/16550 support for Coldfire in kernel 2.6.x, Javier Herrero
keyboard and console, devi
CF card can't be mount on uclinux 2.4 !, 肖 dragon
Linux routing, Bhaskar
- Re: Linux routing, Erwin Authried
Re: GOT size limit reached, Anders Holmberg
PS/2, Hema K
- Re: PS/2, Deepu d
eth0 not working (M5249C3), Kjell Uddeborg
uClinux-dist-test-20050808 patch verification?, Jordan Fuerst
- Re: uClinux-dist-test-20050808 patch verification?, Greg Ungerer
serial.c 16550A uart weirdness, Jate Sujjavanich
Almost there, itche
- Re: Almost there, Thomas Gleixner
net-snmp configuration, Guotii
- Re: net-snmp configuration, Doug Kehn
  - JFFS2 mounting problem with networking support, Suresh Steven Veigas
- Re: net-snmp configuration, Brian Quigley
- Re: net-snmp configuration, Guotii
  - Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
  - Re: Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
  - Re: Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
  - Re: Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
  - Re: Re: net-snmp configuration, Doug Kehn
  - Free JTAG flash programmer, Deepu d
    - Re: Free JTAG flash programmer, Erwin Authried
    - Re: Free JTAG flash programmer, Dmitriy Cherkashin
- Re: net-snmp configuration, Guotii
  - Re: Re: net-snmp configuration, Doug Kehn
-fno-builtin in coldfire?, Gavin Lambert
- Re: -fno-builtin in coldfire?, Greg Ungerer
  - RE: -fno-builtin in coldfire?, Gavin Lambert
    - Re: -fno-builtin in coldfire?, Greg Ungerer
    - RE: -fno-builtin in coldfire?, Gavin Lambert
    - Re: -fno-builtin in coldfire?, Greg Ungerer
    - RE: -fno-builtin in coldfire?, Gavin Lambert
  - Re: -fno-builtin in coldfire?, Christoph Hellwig
RE: problems with ram not at 0x00000000, Jordan Fuerst
- RE: problems with ram not at 0x00000000, Gavin Lambert
- Re: problems with ram not at 0x00000000, H. Holfelder
- problems with ram not at 0x00000000, Jordan Fuerst
  - Re: problems with ram not at 0x00000000, Javier Herrero
- RE: problems with ram not at 0x00000000, Jordan Fuerst
  - Re: problems with ram not at 0x00000000, H. Holfelder
help: gcc in cygwin does not read "fastcall"?, Alvin Cao
Porting rrdtool or equivalent in uclinux, Yves CLOUSIER
Regarding uclinux 2.6.12, R Vijay
- Re: Regarding uclinux 2.6.12, Greg Ungerer
Adding Users..., Uwe Beutin
Need help on PalmVx, Fred Fred
Target for OpenGL ES development ????, ODY
ldmia sp, :r0 - pc}^ instruction is correct or not, jerin
- RE: ldmia sp, :r0 - pc}^ instruction is correct or not, Friedrich, Lars
Configure a ppp conection to GPRS, Eduardo Figueres
- RE: Configure a ppp conection to GPRS, Merrifield, Steven (GE Infrastructure)
how mount a windows filesystem in my board 5282?, Oscar Fraile
- Re: how mount a windows filesystem in my board 5282?, Andrew Holt
- Re: how mount a windows filesystem in my board 5282?, Oscar Fraile
ps/2 mouse, Hema K
Is 1M SDRAM enough to play with uClinux?, Alvin Cao
- Re: Is 1M SDRAM enough to play with uClinux?, David McCullough
  - Re: Is 1M SDRAM enough to play with uClinux?, Alvin Cao
    - Re: Is 1M SDRAM enough to play with uClinux?, David McCullough
bogus logical sector size 20487, Dave Memmott
- Re: bogus logical sector size 20487, Andrey Butok
- RE: RE: bogus logical sector size 20487, Dave Memmott
Query, Amol Shrotri
- Re: Query, Deepu d
Re: uClinux-dev Digest, Vol 29, Issue 9, Guotii
IPC Question, Robin Getz
- Re: IPC Question, Greg Ungerer
  - System hangs @ smc_probe, Suresh Steven Veigas
    - Re: System hangs @ smc_probe, Greg Ungerer
    - Re: System hangs @ smc_probe, Suresh Steven Veigas
Un-compressing problems with ram not at 0x00000000, Jordan Fuerst
- RE: Un-compressing problems with ram not at 0x00000000, Gavin Lambert
MTD help, itche
- Re: MTD help, Claudio Lanconelli
Problem with math.h, Pablo Silva
Kernel panic running sh - dist20050808 for 5272C3, Luca Cussolotto
uClinux Workshop, Munich, October, Phil Wilshire
Xilinx ps/s mouse, Hema K
SNMP response!, Guotii
- Re: SNMP response!, Doug Kehn
Can the m68k-elf-gcc deal with the four eMAC in parallel?, Qiao Guangjun-rg273c
How best to signal between apps in uClinux ??, Tom
tool chain & uclibc, Sergei Sharonov
- Re: tool chain & uclibc, Greg Ungerer
- Re: tool chain & uclibc, David McCullough
  - BDI2000 ARM 7/9 JTAG 4 sale, Mark McChrystal
DeviceNet Slave stack?, Andrew Kohlsmith
- Re: DeviceNet Slave stack?, Heinz-Jürgen Oertel
- Re: DeviceNet Slave stack?, Heinz-Jürgen Oertel
xilinx ps/2 code, Hema K
- Message not available
  - Re: xilinx ps/2 code, Paul Hartke
booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
  - Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
    - Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Greg Ungerer
  - Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
  - Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
RE: Coldfire uart as rs485, Heinz Haeberle
- Re: RE: Coldfire uart as rs485, Andrew Kohlsmith
disable serial console, Eduardo Figueres
- Re: disable serial console, Heiko Degenhardt
MTD failes to compile 20050808, Robert B. Williams
Re: 2.6.x MAGIC_ROM_PTR error, Yasushi SHOJI
- Re: 2.6.x MAGIC_ROM_PTR error, Greg Ungerer
Rtai Support for the MCF5235, Alfredo Rubio Guinea
[patch] linux-2.4.31-uc0 MTD mapping for Signal MCP751, Luca Cussolotto
TAP Driver, Jordan Fuerst
[PATCH] Remove read from bad memory in mm/nommu.c, Robin Getz
- RE: [PATCH] Remove read from bad memory in mm/nommu.c, Gavin Lambert
  - Re: [PATCH] Remove read from bad memory in mm/nommu.c, Greg Ungerer
- Re: easy access of linux-2.6.x-uc kernel (was: [PATCH] Remove read from bad memory in mm/nommu.c), Robin Getz
  - Re: Re: easy access of linux-2.6.x-uc kernel, Greg Ungerer
Linux kernel 2.4 with disabled MMU on SH4 7751R processor, Lara John
- Re: Linux kernel 2.4 with disabled MMU on SH4 7751R processor, David McCullough
Tools to develop an application, Oscar Fraile
protection unit is enabling is mandatory or not ( Help meee), jerin
Downloading big application to target, Jayakara, Nalthooru
- Debug tool for pppd, Dinesh.shetty
  - Debug tool for pppd, Dinesh.shetty
    - Re: Debug tool for pppd, Manjur S
- RE: Downloading big application to target, Friedrich, Lars
RTAI for 5272 proting problem, Vivek Agarwal
- RE: RTAI for 5272 proting problem, Oscar Fraile
  - Re: RE: RTAI for 5272 proting problem, Vivek Agarwal
    - Porting RTAI on M5272C3 eval board, Vivek Agarwal
regarding protection unit in arm940t, jerin
file description ???????, MadTop
need login prompt on serial and telnet, ml
- RE: need login prompt on serial and telnet, Harald Küthe
RE: RS-485 Driver for MCF5272, Heinz Haeberle
Re: [patch] linux-2.4.27-uc1 (dist 20041512) Additional uart for Signal MCP751, Greg Ungerer
- R: [patch] linux-2.4.27-uc1 (dist 20041512) Additionaluart for Signal MCP751, Luca Cussolotto
  - Re: R: [patch] linux-2.4.27-uc1 (dist 20041512) Additionaluart for Signal MCP751, Greg Ungerer
    - R: R: [patch] linux-2.4.27-uc1 (dist20041512) Additionaluart for Signal MCP751, Luca Cussolotto
    - Re: R: R: [patch] linux-2.4.27-uc1 (dist20041512) Additionaluart for Signal MCP751, Greg Ungerer
POSIX.4 timers/signals, Barrett, Kevin
register_chrdev(), jamal
memory is limited, 唐剑
kernel command line - MTD question, Matt Waddel
- Re: kernel command line - MTD question, Greg Ungerer
Re: Autorun an application-program, Oscar Fraile
- Re: Re: Autorun an application-program, Heiko Degenhardt
- RE: Re: Autorun an application-program, Lars-Åke Ekstrand
- Re: Autorun an application-program, Oscar Fraile
Re: Kernel oops after flash image write, Greg Ungerer
Re: user applications & kernel versions..., Greg Ungerer
SNMP opensource, MadTop
- Re: SNMP opensource, Patrice Kadionik
tr not getting built in busybox, Bob Kojima
- Re: tr not getting built in busybox, Greg Ungerer
  - Re: tr not getting built in busybox, Bob Kojima
    - Re: tr not getting built in busybox, Greg Ungerer
nommu-mmap and XIP (on m68k), Michael Leslie
- Re: nommu-mmap and XIP (on m68k), Greg Ungerer
- Re: nommu-mmap and XIP (on m68k), David Howells
- Re: nommu-mmap and XIP (on m68k), David Howells
Re: [uClinux-dev] MTD/uclinux help, itche
- Re: MTD/uclinux help, H. Holfelder
  - Re: MTD/uclinux help, itche
ncurses with uClinux, Juan Lablanca
- RE: ncurses with uClinux, Gavin Lambert
  - Re: ncurses with uClinux, Juan Lablanca
[patch] Winbond W90N740 support for uClinux-dist-test-20050808, Erwin Authried
- Re: [patch] Winbond W90N740 support for uClinux-dist-test-20050808, Greg Ungerer
Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- uClinux-dist-test-20050808 released for testing, Greg Ungerer
  - Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: uClinux-dist-test-20050808 released for testing, Harald Küthe
- Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
  - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
    - elf2flt patch for building in msys/mingw environment, Dave Murphy
    - Re: elf2flt patch for building in msys/mingw environment, David McCullough
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, NZG
    - Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
linux-2.6.13-uc0 patch set released, Greg Ungerer
about perl install!, Guotii
Re: Linux vendor settings patch, Greg Ungerer
- RE: Linux vendor settings patch, Friedrich, Lars
  - Re: Linux vendor settings patch, Greg Ungerer
- RE: Linux vendor settings patch, Mark Plowman