|
|
September 29, 2005
- ARM7TDMI Support, Paul G. Allen
- How do I turn off the Don't Fragment flag (2.6 kernel), John Dugan
- Re: uClinux and Wifi ?, Erwin Authried
- Problem with PS, DMESG and IXP425 driver, G r a n z o t o
- RE: uClinux and Wifi ?, Daniel Alomar
- Re: Re: net-snmp configuration, Doug Kehn
- Re: uClinux and Wifi ?, Nicolas Ferre
- Re: using objdump to disassemble binaries, Maciej Witaszek
- Re: using objdump to disassemble binaries, Stuart Hughes
- uClinux and Wifi ?, Jean Lee
- Wrong CLEANMARKER Position on MTD, Chen Zhigao
- using objdump to disassemble binaries, Michal Skuza
- Re: Eraseall for MTD block devices, Erwin Authried
- Re: Eraseall for MTD block devices, Suresh Steven Veigas
- RE: elf2flt for arm not work, redice li
- Re: Free JTAG flash programmer, Dmitriy Cherkashin
- Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
September 28, 2005
- Re: Eraseall for MTD block devices, David McCullough
- Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, David McCullough
- RE: Eraseall for MTD block devices, Gavin Lambert
- Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- Re: Re: [REPOST] ARM7TDMI: make image fails, kernel fails, David McCullough
- Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- samba smbmount question, Robin Getz
- Re: [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Problem with tc, kanhu
- Re: Eraseall for MTD block devices, Erwin Authried
- Re: Jffs2 space problem, Erwin Authried
- Re: elf2flt patch for building in msys/mingw environment, David McCullough
- elf2flt patch for building in msys/mingw environment, Dave Murphy
September 27, 2005
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- RE: elf2flt for arm not work, Gavin Lambert
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: my code should be in which layer?, Heinz-Jürgen Oertel
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: Jffs2 space problem, mark . c . giacobbe
- Re: net-snmp configuration, Guotii
- R: Jffs2 space problem, Calò Massimo
- elf2flt for arm not work, redice li
- Re: Eraseall for MTD block devices, Suresh Steven Veigas
- USB OTG Driver, Abhijith K S
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- Re: Jffs2 space problem, Greg Ungerer
September 26, 2005
- Re: Jffs2 space problem, Greg Ungerer
- Hardware recommendation,, Andres Paglayan
- Re: Jffs2 space problem, Greg Ungerer
- Re: Booting uClinux on SPARC V8, Greg Ungerer
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- JFFS2 checksum errors, NZG
- Re: Jffs2 space problem, Javier Herrero
- [REPOST] ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: Jffs2 space problem, NZG
- Re: mknod chmod and mkdir.. Where?, NZG
- mknod chmod and mkdir.. Where?, Jordan Fuerst
- Booting uClinux on SPARC V8, Matteo Zanella
- Re: mcf5206 2.4.31 blkmem/mmap issue?, Erwin Authried
- mcf5206 2.4.31 blkmem/mmap issue?, Andrew Kohlsmith
- Re: Jffs2 space problem, Erwin Authried
- Re: Jffs2 space problem, mark . c . giacobbe
- Re: Jffs2 space problem, NZG
- Jffs2 space problem, Calò Massimo
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- Re: Eraseall for MTD block devices, NZG
- Re: Modbus status, NZG
- Re: Problems with telnetd in uClinux-test-20050808 and uClinux-test-20050906, Javier Herrero
- 5282 and USB, Daniel Alomar
- RE: my code should be in which layer?, Friedrich, Lars
- Re: Snapgear-3.3.0 ixp425_eth.o kernel panic, Stewart Heitmann
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- Re: Scheduler Bug, David McCullough
- Re: senTec vendor patch, Greg Ungerer
- Snapgear-3.3.0 ixp425_eth.o kernel panic, Stewart Heitmann
- Re: R: R: [patch] linux-2.4.27-uc1 (dist20041512) Additionaluart for Signal MCP751, Greg Ungerer
- Re: 20041215 2.4.x elf support broken?, Greg Ungerer
- Re: my code should be in which layer?, lio
- my code should be in which layer?, chen
- How to port uClinux to my own board ?, Hoang Nhat Nam
- Re: uclinux kernel ksize error., David McCullough
- uclinux kernel ksize error., joson_zhang
September 23, 2005
- ARM7TDMI: make image fails, kernel fails, Paul G. Allen
- Re: 20041215 2.4.x elf support broken?, Andrew Kohlsmith
- Re: Modbus status, Andrew Kohlsmith
- 20041215 2.4.x elf support broken?, Andrew Kohlsmith
- 68VZ328 ucdimm - linux-2.6.13, Stuart Hughes
- Re: Free JTAG flash programmer, Erwin Authried
- Free JTAG flash programmer, Deepu d
- Re: Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
- console, devi
September 21, 2005
- Re: XIP broken in 2.4.31-uc0 ? (fwd), Michael Leslie
- XIP broken in 2.4.31-uc0 ?, Erwin Authried
- Re: Booting from flash, vijai kumar
- Re: nanoX on tty7, Eric BENARD / Free
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- RE: Booting from flash, Robert B. Williams
- nanoX on tty7, sujatha
- Re: DeviceNet Slave stack?, Heinz-Jürgen Oertel
- Booting from flash, kanhu
- RE : RE: ARM940T : Calibrate Loop Delay, jerin
- RE: Problem with JFFS2 file system, Ashok
- Re: net-snmp configuration, Guotii
September 20, 2005
- Re: Problem with JFFS2 file system, Erwin Authried
- Problem with JFFS2 file system, Ashok
- Re: senTec vendor patch, boris-nikolov . koprinarov
- Re: Re: net-snmp configuration, Doug Kehn
- Re: net-snmp configuration, Guotii
- R: R: [patch] linux-2.4.27-uc1 (dist20041512) Additionaluart for Signal MCP751, Luca Cussolotto
- Re: how mount a windows filesystem in my board 5282?, Oscar Fraile
- RE: ARM940T : Calibrate Loop Delay, Friedrich, Lars
- problem in __irq_svc, jerin
- ARM940T : Calibrate Loop Delay, Devarshi
- Re: snapgear 2.4.x kernel and mainline, David McCullough
- snapgear 2.4.x kernel and mainline, Abhijit Pradhan
September 19, 2005
- Re: DeviceNet Slave stack?, Heinz-Jürgen Oertel
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- RE: Re: /var/log/messages: Enabling Response, Jate Sujjavanich
- Re: /var/log/messages: Enabling Response, Doug Kehn
- Re: senTec vendor patch, boris-nikolov . koprinarov
- Re: Re: net-snmp configuration, Doug Kehn
- serial port driver and MTD <-> JFFS2 problem (kernel 2.6), boris-nikolov . koprinarov
- Re: senTec vendor patch, Frieder Ferlemann
- senTec vendor patch, boris-nikolov . koprinarov
- Re: net-snmp configuration, Guotii
September 16, 2005
- Re: Linux routing, Erwin Authried
- Linux routing, Bhaskar
- Re: net-snmp configuration, Doug Kehn
- Re: PS/2, Deepu d
- Re: GOT size limit reached, Anders Holmberg
- Re: problems with ram not at 0x00000000, H. Holfelder
- PS/2, Hema K
- Re: net-snmp configuration, Guotii
- Re: Almost there, Thomas Gleixner
- Re: R: [patch] linux-2.4.27-uc1 (dist 20041512) Additionaluart for Signal MCP751, Greg Ungerer
- Re: uClinux-dist-test-20050808 patch verification?, Greg Ungerer
- JFFS2 mounting problem with networking support, Suresh Steven Veigas
September 15, 2005
- eth0 not working (M5249C3), Kjell Uddeborg
- uClinux-dist-test-20050808 patch verification?, Jordan Fuerst
- RE: problems with ram not at 0x00000000, Jordan Fuerst
- RE: -fno-builtin in coldfire?, Gavin Lambert
- serial.c 16550A uart weirdness, Jate Sujjavanich
- Re: net-snmp configuration, Brian Quigley
- Almost there, itche
- Re: net-snmp configuration, Doug Kehn
- Re: -fno-builtin in coldfire?, Christoph Hellwig
- net-snmp configuration, Guotii
- Re: problems with ram not at 0x00000000, H. Holfelder
- Re: Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- Re: -fno-builtin in coldfire?, Greg Ungerer
- Re: problems with ram not at 0x00000000, Javier Herrero
- RE: -fno-builtin in coldfire?, Gavin Lambert
- Re: -fno-builtin in coldfire?, Greg Ungerer
- RE: -fno-builtin in coldfire?, Gavin Lambert
- Re: -fno-builtin in coldfire?, Greg Ungerer
- -fno-builtin in coldfire?, Gavin Lambert
- Re: Regarding uclinux 2.6.12, Greg Ungerer
- RE: problems with ram not at 0x00000000, Gavin Lambert
September 14, 2005
- problems with ram not at 0x00000000, Jordan Fuerst
- RE: problems with ram not at 0x00000000, Jordan Fuerst
- Re: Re: uClinux-dist-test-20050808 released for testing, NZG
- help: gcc in cygwin does not read "fastcall"?, Alvin Cao
- Porting rrdtool or equivalent in uclinux, Yves CLOUSIER
- Regarding uclinux 2.6.12, R Vijay
- Adding Users..., Uwe Beutin
- Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- Re: uClinux-dist-test-20050808 released for testing, Harald Küthe
- RE: ldmia sp, :r0 - pc}^ instruction is correct or not, Friedrich, Lars
- Need help on PalmVx, Fred Fred
- RE: Configure a ppp conection to GPRS, Merrifield, Steven (GE Infrastructure)
September 13, 2005
- Target for OpenGL ES development ????, ODY
- RE: RE: bogus logical sector size 20487, Dave Memmott
- Re: uClinux-dist-test-20050808 released for testing, NZG
- ldmia sp, :r0 - pc}^ instruction is correct or not, jerin
- Configure a ppp conection to GPRS, Eduardo Figueres
- Re: how mount a windows filesystem in my board 5282?, Andrew Holt
- how mount a windows filesystem in my board 5282?, Oscar Fraile
- Re: bogus logical sector size 20487, Andrey Butok
- ps/2 mouse, Hema K
- Re: System hangs @ smc_probe, Suresh Steven Veigas
- uClinux-dist-test-20050808 released for testing, Greg Ungerer
- Re: Is 1M SDRAM enough to play with uClinux?, David McCullough
- Re: Is 1M SDRAM enough to play with uClinux?, Alvin Cao
- Re: Is 1M SDRAM enough to play with uClinux?, David McCullough
- Is 1M SDRAM enough to play with uClinux?, Alvin Cao
- Re: System hangs @ smc_probe, Greg Ungerer
September 09, 2005
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
- IPC Question, Robin Getz
- Un-compressing problems with ram not at 0x00000000, Jordan Fuerst
- Re: MTD help, Claudio Lanconelli
- MTD help, itche
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Problem with math.h, Pablo Silva
- Kernel panic running sh - dist20050808 for 5272C3, Luca Cussolotto
- uClinux Workshop, Munich, October, Phil Wilshire
- Xilinx ps/s mouse, Hema K
- Re: SNMP response!, Doug Kehn
- SNMP response!, Guotii
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: tool chain & uclibc, Greg Ungerer
- Re: Re: easy access of linux-2.6.x-uc kernel, Greg Ungerer
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Greg Ungerer
- Can the m68k-elf-gcc deal with the four eMAC in parallel?, Qiao Guangjun-rg273c
- Re: Debug tool for pppd, Manjur S
September 08, 2005
- Re: xilinx ps/2 code, Paul Hartke
- How best to signal between apps in uClinux ??, Tom
- tool chain & uclibc, Sergei Sharonov
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- DeviceNet Slave stack?, Andrew Kohlsmith
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: RE: Coldfire uart as rs485, Andrew Kohlsmith
- Re: booting linux-2.6.11 on a ucdimm (68VZ328), Phil Wilshire
- xilinx ps/2 code, Hema K
- booting linux-2.6.11 on a ucdimm (68VZ328), Stuart Hughes
- Re: 2.6.x MAGIC_ROM_PTR error, Greg Ungerer
- Re: disable serial console, Heiko Degenhardt
- RE: Coldfire uart as rs485, Heinz Haeberle
- Debug tool for pppd, Dinesh.shetty
- Debug tool for pppd, Dinesh.shetty
September 07, 2005
- disable serial console, Eduardo Figueres
- MTD failes to compile 20050808, Robert B. Williams
- Re: easy access of linux-2.6.x-uc kernel (was: [PATCH] Remove read from bad memory in mm/nommu.c), Robin Getz
- Re: 2.6.x MAGIC_ROM_PTR error, Yasushi SHOJI
- Re: RE: RTAI for 5272 proting problem, Vivek Agarwal
- Rtai Support for the MCF5235, Alfredo Rubio Guinea
- [patch] linux-2.4.31-uc0 MTD mapping for Signal MCP751, Luca Cussolotto
- R: [patch] linux-2.4.27-uc1 (dist 20041512) Additionaluart for Signal MCP751, Luca Cussolotto
- RE: RTAI for 5272 proting problem, Oscar Fraile
- RE: Downloading big application to target, Friedrich, Lars
September 05, 2005
- RTAI for 5272 proting problem, Vivek Agarwal
- regarding protection unit in arm940t, jerin
- file description ???????, MadTop
- RE: need login prompt on serial and telnet, Harald Küthe
- need login prompt on serial and telnet, ml
- RE: RS-485 Driver for MCF5272, Heinz Haeberle
- Re: Autorun an application-program, Oscar Fraile
- Re: [patch] linux-2.4.27-uc1 (dist 20041512) Additional uart for Signal MCP751, Greg Ungerer
- Re: kernel command line - MTD question, Greg Ungerer
- Re: tr not getting built in busybox, Greg Ungerer
September 02, 2005
- kernel command line - MTD question, Matt Waddel
- Re: tr not getting built in busybox, Bob Kojima
- Re: ncurses with uClinux, Juan Lablanca
- Re: nommu-mmap and XIP (on m68k), David Howells
- Re: nommu-mmap and XIP (on m68k), David Howells
- Re: MTD/uclinux help, itche
- Re: Re: Autorun an application-program, Heiko Degenhardt
- RE: Re: Autorun an application-program, Lars-Åke Ekstrand
- Re: Autorun an application-program, Oscar Fraile
- Re: SNMP opensource, Patrice Kadionik
- RE: Linux vendor settings patch, Mark Plowman
- Re: Kernel oops after flash image write, Greg Ungerer
- Re: user applications & kernel versions..., Greg Ungerer
- Re: MTD/uclinux help, H. Holfelder
- Re: [patch] Winbond W90N740 support for uClinux-dist-test-20050808, Greg Ungerer
- Re: nommu-mmap and XIP (on m68k), Greg Ungerer
- Re: tr not getting built in busybox, Greg Ungerer
- SNMP opensource, MadTop
- Re: Linux vendor settings patch, Greg Ungerer
September 01, 2005
- RE: ncurses with uClinux, Gavin Lambert
- tr not getting built in busybox, Bob Kojima
- nommu-mmap and XIP (on m68k), Michael Leslie
- Re: [uClinux-dev] MTD/uclinux help, itche
- ncurses with uClinux, Juan Lablanca
- [patch] Winbond W90N740 support for uClinux-dist-test-20050808, Erwin Authried
- Re: uClinux-dist-test-20050808 released for testing, Greg Ungerer
- linux-2.6.13-uc0 patch set released, Greg Ungerer
- RE: Linux vendor settings patch, Friedrich, Lars
- about perl install!, Guotii
- Re: Linux vendor settings patch, Greg Ungerer
|
|
