uclinux.devel (thread)

malloc, munmap, etc..., Uwe Beutin
- Re: malloc, munmap, etc..., Miles Bader
Network performance, Vadim Lebedev
Resolver and Timeouts, Uwe Beutin
uClinux-2.5.42uc0 patches, Greg Ungerer
irattach patch, Carlos Manuel Duclos Vergara
- Re: irattach patch, David McCullough
  - Re: irattach patch, Carlos Manuel Duclos Vergara
- fail executing shell, Ronald Midian
BDM debug, Guifang Wu
- Re: BDM debug, Phil Wilshire
libusb.... has any one ported that to uClinux ?, Thomas Chen
irda-utils, Carlos Manuel Duclos Vergara
arm-elf-gcc, Johan Thelin
- Re: arm-elf-gcc, Phil Wilshire
NETDEV Watchdog and timeout transmits, Uwe Beutin
which version of linux is the latest?, Thomas Chen
- Re: which version of linux is the latest?, David McCullough
  - Re: which version of linux is the latest?, Thomas Chen
    - Re: which version of linux is the latest?, David McCullough
Real time clock interrupts, López
uClinux with Intel No-boot-sector Flash 28f320s????????, Paul
- Re: uClinux with Intel No-boot-sector Flash 28f320s????????, Richard Klingler
How do I enable UDP socket, Peter Ogilvy
- Re: How do I enable UDP socket, Matthew Natalier
  - Re: How do I enable UDP socket, Kenneth Porter
    - Re: How do I enable UDP socket, Matthew Natalier
    - Re: How do I enable UDP socket, Phil Wilshire
FYI: uClinux in 2.5.40-ac1!, Bernhard Kuhn
- Re: FYI: uClinux in 2.5.40-ac1!, Greg Ungerer
Porting with non-gcc compiler and configure scripts, Alexander Gdalevich
make problem under Cygwin, Lee Thalblum
- Re: make problem under Cygwin, Stephen Biggs
An error of compiling m68k-elf-tools? ("UNIX98PTY_ONLY enabled but TIOCGPTN ioctl not supported by your kernel.", Paul
- Problem with SMC9194 driver, MG-technik
  - Re: Problem with SMC9194 driver, Kendrick Hamilton
  - Re: Problem with SMC9194 driver, Greg Ungerer
- Re: An error of compiling m68k-elf-tools? ("UNIX98PTY_ONLY enabled but TIOCGPTN ioctl not supported by your kernel.", Kendrick Hamilton
  - ??,?: [uClinux-dev] An error of compiling m68k-elf-tools? ("UNIX98PTY_ONLY enabled but TIOCGPTN ioctl not supported by your kernel.", Paul
- Re: An error of compiling m68k-elf-tools? ("UNIX98PTY_ONLY enabled but TIOCGPTN ioctl not supported by your kernel.", Carlos Manuel Duclos Vergara
uCdimm, uCbootstrap, and flash writing.., Uwe Beutin
- Re: uCdimm, uCbootstrap, and flash writing.., Patrick Maille
  - Re: uCdimm, uCbootstrap, and flash writing.., Uwe Beutin
Silly problem :-) ( applikation ), Lars Segerlund
- Re: Silly problem :-) ( applikation ), Uwe Beutin
  - Re: Silly problem :-) ( applikation ), Lars Segerlund
    - Re: Silly problem :-), Kendrick Hamilton
why socket has no respone?, wang rui
- Re: why socket has no respone?, Carsten Neumann
- Re: why socket has no respone?, wang rui
RTC MAX6902, Uwe Beutin
- Re: RTC MAX6902, Richard Klingler
Internal ram .., Lars Segerlund
- Re: Internal ram .., Greg Ungerer
e2fsprogs for the m68k, Uwe Beutin
Re: m68k toolchain, Jay Vaughan
undefined reference to 'device_setup', qmai
Does ARM7 do pipelining?, Michael D. Crawford
- Re: Does ARM7 do pipelining?, Phil Wilshire
- Re: Does ARM7 do pipelining?, Erwin Authried
Strangeness in thread demo's, Jay Vaughan
- Re: Strangeness in thread demo's, David McCullough
  - Re: Strangeness in thread demo's, Jay Vaughan
    - Re: Strangeness in thread demo's, David McCullough
- Re: Strangeness in thread demo's, Bernhard Kuhn
  - Re: Strangeness in thread demo's, Phil Wilshire
  - NEED HELP!!!, MG-technik
    - Re: NEED HELP!!!, Uwe Beutin
    - Need Help Again :-), MG-technik
    - Re: Need Help Again :-), Uwe Beutin
    - Re: NEED HELP!!!(startup and NFS), Matthias Schoeldgen
Process Status..., Uwe Beutin
- Re: Process Status..., David McCullough
- Re: Process Status..., D. Jeff Dionne
request_irq(), Guifang Wu
- Re: request_irq(), Greg Ungerer
- Re: request_irq(), Stephen Biggs
Re: new "malloc" directory ..., Miles Bader
uCdimm and time lag..., Uwe Beutin
- Re: uCdimm and time lag..., Hans Wilmers
  - Re: uCdimm and time lag..., Uwe Beutin
    - Re: uCdimm and time lag..., Georges Menie
    - Re: uCdimm and time lag..., Hans Wilmers
    - Re: uCdimm and time lag..., daniel . haensse
    - Re: uCdimm and time lag..., Uwe Beutin
    - Re: uCdimm and time lag..., Georges Menie
    - Re: uCdimm and time lag..., Hans Wilmers
uCdimm and second serial port, Uwe Beutin
Unrecognized option mc68020 when installing and building the gcc-2.95.3 cross compiler, Eric Bosch
- Re: Unrecognized option mc68020 when installing and building the gcc-2.95.3 cross compiler, Uwe Beutin
- Re: Unrecognized option mc68020 when installing and building the gcc-2.95.3 cross compiler, Phil Wilshire
pthreads problem in latest uClinux dist?, Jay Vaughan
- Re: pthreads problem in latest uClinux dist?, Phil Wilshire
  - Re: pthreads problem in latest uClinux dist?, Jay Vaughan
    - uClinux from flash., Sunil Kumar T
    - Re: uClinux from flash., David McCullough
    - Re: uClinux from flash., Erwin Authried
    - Re: uClinux from flash., Sunil Kumar T
    - Re: uClinux from flash., Erwin Authried
    - Re: uClinux from flash., Sunil Kumar T
    - uClinux on ARM7TDMI, Sunil Kumar T
    - Re: uClinux on ARM7TDMI, thomas chen
    - Re: uClinux on ARM7TDMI, Sunil Kumar T
    - Re: uClinux on ARM7TDMI, Thomas Chen
- Re: pthreads problem in latest uClinux dist?, David McCullough
[PATCH] Fix to 'dhcpcd' for uClibc compile..., Steven J. Hill
- Re: [PATCH] Fix to 'dhcpcd' for uClibc compile..., David McCullough
link problem!, danny can
- Re: link problem!, Jim McLaughlin
MAC instructions and 5272, eraldo
(unknown), mathias . fritzson
- Re:, David McCullough
- (unknown), Guifang Wu
  - Re:, Olivier Pierrat
compile problem please help ?, danny can
- Re: compile problem please help ?, Matthew Natalier
- compile problem please help ?, danny can
Getting corrupted 1st byte on minicom. (Serial), Benny Chen
- Re: Getting corrupted 1st byte on minicom. (Serial), Phil Wilshire
  - Re: Getting corrupted 1st byte on minicom. (Serial), Benny Chen
- RE: Getting corrupted 1st byte on minicom. (Serial), Steven Merrifield
strange problem about boa, Y.H. Park
- Re: strange problem about boa, Uwe Beutin
how to create a compressed kernel with MCF5272, JINGSONG LIU
- Re: how to create a compressed kernel with MCF5272, Kendrick Hamilton
- Re: how to create a compressed kernel with MCF5272, Bernhard Kuhn
- Re: how to create a compressed kernel with MCF5272, Erdem Gunes
- Re: how to create a compressed kernel with MCF5272, JINGSONG LIU
Illegal read from - execve ("/sbin/init.."), pushpa sh
- Re: Illegal read from - execve ("/sbin/init.."), Ronald Midian
- Re: Illegal read from - execve ("/sbin/init.."), Ronald Midian
- Re: Illegal read from - execve ("/sbin/init.."), pushpa sh
Patches for MIPS uClinux (2/4), adding 'utelnetd' support..., Steven J. Hill
Patches for MIPS uClinux (3/4), fix building of INITRD..., Steven J. Hill
Patches for MIPS uClinux (1/4)..., Steven J. Hill
- Re: Patches for MIPS uClinux (1/4)..., Steven J. Hill
- Re: Patches for MIPS uClinux (1/4)..., Erik Andersen
Patches for MIPS uClinux (4/4) proposed 'mtd-utils' patch..., Steven J. Hill
Coldfire uClinux interuppts and timers, Lars Segerlund
- Re: Coldfire uClinux interuppts and timers, Phil Wilshire
- Re: Coldfire uClinux interuppts and timers, Greg Ungerer
  - Re: Coldfire uClinux interuppts and timers, Lars Segerlund
- Re: Coldfire uClinux interuppts and timers, Thomas Chen
Another compilation problem, qmai
SWI relocation problem, Johan Thelin
- Re: SWI relocation problem, Stephen Biggs
  - Re: SWI relocation problem, Thomas Chen
    - Re: SWI relocation problem, Stephen Biggs
    - Re: SWI relocation problem, Johan Thelin
    - Re: SWI relocation problem, thomas chen
    - Re: SWI relocation problem, Erwin Authried
    - Re: SWI relocation problem, Erwin Authried
    - Re: SWI relocation problem, Stephen Biggs
    - Re: SWI relocation problem, Johan Thelin
    - Re: SWI relocation problem, Stephen Biggs
    - Re: SWI relocation problem, Johan Thelin
debugging FLAT binaries on ARM without MMU, Markus Pietrek
- debugging FLAT binaries on ARM without MMU, Markus Pietrek
  - Re: debugging FLAT binaries on ARM without MMU, Norman Shulman
    - Re: debugging FLAT binaries on ARM without MMU, Markus Pietrek
- debugging FLAT binaries on ARM without MMU, Markus Pietrek
- debugging FLAT binaries on ARM without MMU, maillist
make config for 68360, Lee Thalblum
- Re: make config for 68360, Kendrick Hamilton
Integration of new gdbserver code?, Steven J. Hill
uCdimm (MC68VZ328), suspend / resume, Hans Wilmers
- Re: uCdimm (MC68VZ328), suspend / resume, Philippe Ney
- Re: uCdimm (MC68VZ328), suspend / resume, Hans Wilmers
  - Re: uCdimm (MC68VZ328), suspend / resume, Philippe Ney
    - Re: uCdimm (MC68VZ328), suspend / resume, Hans Wilmers
    - Re: uCdimm (MC68VZ328), suspend / resume, Philippe Ney
    - Re: uCdimm (MC68VZ328), suspend / resume, Philippe Ney
    - Re: uCdimm (MC68VZ328), suspend / resume, Hans Wilmers
    - Re: uCdimm (MC68VZ328), suspend / resume, Philippe Ney
Samsung 4510 reboot problem, Y.H. Park
- Re: Samsung 4510 reboot problem, Erwin Authried
- Re: Samsung 4510 reboot problem, D. Jeff Dionne
DNS and uClinux, Ron Fial
- Re: DNS and uClinux, Jim Treadway
- Re: DNS and uClinux, Ron Fial
  - Re: DNS and uClinux, Kenneth Porter
To uClinux or not to uClinux, Marinus De Jong
- Re: To uClinux or not to uClinux, Kendrick Hamilton
- Re: To uClinux or not to uClinux, Phil Wilshire
  - Re: To uClinux or not to uClinux, T Ziomek
  - Re: To uClinux or not to uClinux, Marinus De Jong
- Re: To uClinux or not to uClinux, Ron Fial
What tool versions for ARM uclinux development?, Joe Cotellese
- Re: What tool versions for ARM uclinux development?, David McCullough
- Re: What tool versions for ARM uclinux development?, Phil Wilshire
- Re: What tool versions for ARM uclinux development?, D. Jeff Dionne
  - AT91 EB01, Johan Thelin
    - Re: AT91 EB01, thomas chen
problem building user tools .., Lars Segerlund
- Re: problem building user tools .., David McCullough
- Re: problem building user tools .., Greg Ungerer
compressed ramdisk as root filesystem with uClinux 2.4.14, Shyam.Shrivastav
- Re: compressed ramdisk as root filesystem with uClinux 2.4.14, Steven J. Hill
Problem porting uclinux for DSC21, Plamen Popov
- Re: Problem porting uclinux for DSC21, Greg Ungerer
- Re: Problem porting uclinux for DSC21, thomas chen
variable 'stackbase', qmai
Makefile question, qmai
- Re: Makefile question, Ronald Midian
  - Re: Makefile question, David McCullough
    - Re: Makefile question, thomas chen
    - Re: Makefile question, David McCullough
- Re: Makefile question, Phil Wilshire
Re: Support for Multi-Ice, Ronald Midian
- Re: Support for Multi-Ice, Ronald Midian
[Patch] Accessing IO on uCsimm / uCdimm - was RE: A ccessing internal address space on the ucsimm in uclinux2.4.17, Steven Merrifield
- Re: [Patch] Accessing IO on uCsimm / uCdimm - was RE: A ccessing internal address space on the ucsimm in uclinux2.4.17, David McCullough
Re: Frame Buffer Console, Matthias Schoeldgen
- Re: Frame Buffer Console, Matthias Welwarsky
  - Re: Frame Buffer Console, Matthias Schoeldgen
    - Re: Frame Buffer Console, Matthias Welwarsky
    - Re: Frame Buffer Console, Matthias Schoeldgen
    - Re: Frame Buffer Console, Matthias Welwarsky
    - Re: Frame Buffer Console, Matthias Schoeldgen
Which CPU to Use?, Michael D. Crawford
flashsize, Binoj.G.S
- Re: flashsize, Greg Ungerer
setting a dynamic IP address, Bob Kojima
- Re: setting a dynamic IP address, Michael Leslie
- Re: setting a dynamic IP address, Sascha Smejkal
  - Re: setting a dynamic IP address, Bob Kojima
RE: Problem OpenSSL in shared uC-libc, Anandh M.
Compilation Error indication.., George Thanos
- Re: Compilation Error indication.., Peter Ogilvy
Password Blues Again..., Uwe Beutin
- Re: Password Blues Again..., Phil Wilshire
  - Re: Password Blues Again..., Uwe Beutin
- Re: Password Blues Again..., David McCullough
  - Re: Re: [uClibc]Password Blues Again..., Uwe Beutin
Problem with CVS server, Jay Vaughan
ARM build fails in Cygwin, Stephen Biggs
ppp, Carlos Manuel Duclos Vergara
- Re: ppp, Sascha Smejkal
  - coldfire fec.c ethernet driver, Richard Klingler
    - Re: coldfire fec.c ethernet driver, Greg Ungerer
    - Re: coldfire fec.c ethernet driver, Richard Klingler
    - Re: coldfire fec.c ethernet driver, Greg Ungerer
  - Re: ppp, Carlos Manuel Duclos Vergara
    - Re: ppp, Phil Wilshire
    - Re: ppp, Carlos Manuel Duclos Vergara
    - Re: ppp, Sascha Smejkal
the build-uclinux-tools.sh script question ?, Lars Segerlund
- Re: the build-uclinux-tools.sh script question ?, David McCullough
  - Re: the build-uclinux-tools.sh script question ?, Lars Segerlund
    - Re: the build-uclinux-tools.sh script question ?, David McCullough
Re: cvs prob, Greg Ungerer
- Re: cvs prob, David McCullough
  - Re: Re: cvs prob, Michael Durrant
    - Re: Re: cvs prob, David McCullough
- Re: cvs prob, Jay Vaughan
building uclibc terror :-), Konstantin Kletschke
- Re: building uclibc terror :-), Phil Wilshire
  - Re: building uclibc terror :-), Konstantin Kletschke
Compiler Error, George Thanos
Differences Linux and uClinux, Dmitry Gorochow
- Re: Differences Linux and uClinux, Uwe Beutin
undefined reference to 'ROOT_DEV', qmai
- Re: undefined reference to 'ROOT_DEV', Greg Ungerer
Re: LCD (text) and 4x4 keypad driver......., thomas chen
- Re: LCD (text) and 4x4 keypad driver......., Richard Klingler
uClinux-2.5.40uc0 out now, Greg Ungerer
Re: RSP 7+, thomas chen
Error message BINFMT_FLAT, Uwe Beutin
- Re: Error message BINFMT_FLAT, Syed Faisal Akber
  - Re: Error message BINFMT_FLAT, Uwe Beutin
    - Re: Re: [uClibc]Error message BINFMT_FLAT, David McCullough
A newbie question about rc file (fwd), Francesc Borrell Ros
A newbie question about rc file, Francesc Borrell Ros
Suggestion, Lars Segerlund
- Re: Suggestion, David McCullough
Problem: Large Files on NFS (M5272) - long!, Heiko Degenhardt
- Re: Problem: Large Files on NFS (M5272) - long!, Matthias Schoeldgen
  - Re: Problem: Large Files on NFS (M5272) - long!, Heiko Degenhardt
- Re: Problem: Large Files on NFS (M5272) - long!, Greg Ungerer
  - Re: Problem: Large Files on NFS (M5272) - long!, Jeff Dionne
    - Re: Problem: Large Files on NFS (M5272) - long!, Heiko Degenhardt
    - Re: Problem: Large Files on NFS (M5272) - long!, Frieder Ferlemann
    - Re: Problem: Large Files on NFS (M5272) - long!, Heiko Degenhardt
arm-uclinux-gcc newbie, ananda . vardhan
- Re: arm-uclinux-gcc newbie, Phil Wilshire
  - Re: arm-uclinux-gcc newbie, Greg Ungerer
Minimun size of C++ executables, Javier Abarca
- Re: Minimun size of C++ executables, Matthias Welwarsky
  - Re: Minimun size of C++ executables, David McCullough
  - Save space in flash ROM, Javier Abarca
    - Re: Save space in flash ROM, Uwe Beutin
    - Problem compilig uc-Libc, Javier Abarca
    - Re: Problem compilig uc-Libc, Uwe Beutin
- Re: Minimun size of C++ executables, Kendrick Hamilton
ARM7TDMI tutorial, Ivan Ng
- Frame Buffer Console, Ronald Midian
  - Re: Frame Buffer Console, Matthias Schoeldgen
    - Re: Frame Buffer Console, Ronald Midian
    - Re: Frame Buffer Console, Matthias Schoeldgen
    - newbie question on initrd and romfs, Ronald Midian
    - Re: newbie question on initrd and romfs, Carlos Manuel Duclos Vergara
    - newbie question on initrd and romfs, Ronald Midian
Re: s3c44b0x, Greg Ungerer
- how to display booting message in armnommu with lcd console?, Ronald Midian
Re: RE: [BusyBox] Questions about file sizes, David McCullough
- Re: RE: [BusyBox] Questions about file sizes, Uwe Beutin
  - Re: RE: [BusyBox] Questions about file sizes, David McCullough
    - Re: RE: [BusyBox] Questions about file sizes, Greg Ungerer
Re: uClinux coldfire FEC ethernet driver bug, Greg Ungerer
Re: Binary file format, David McCullough
- Re: Binary file format, Yannis Mitsos
- Re: Binary file format, Greg Ungerer