uclinux.devel (thread)

RE: [BusyBox] Questions about file sizes, Uwe Beutin
s3c44b0x, tapu
undefined reference, Helmut Schröder
- Re: undefined reference, Phil Wilshire
Environmet variables..., Uwe Beutin
- Re: Environmet variables..., Uwe Beutin
  - Re: Environmet variables..., Uwe Beutin
another newbie question about uClinux, qmai
semaphore.h, danny can
[fastdep] Error 135, ananda . vardhan
- Re: [fastdep] Error 135, Phil Wilshire
Does uClinux have 'Intel PC Card Master Controller Chip 6722' driver code~?, Pusik Park
RSP 7+, ananda . vardhan
- Re: RSP 7+, thomas chen
- Re: RSP 7+, ananda . vardhan
  - Re: RSP 7+, Sunil Kumar T
LCD (text) and 4x4 keypad driver......., thomas chen
- Re: LCD (text) and 4x4 keypad driver......., Richard Klingler
Where is the MIPS uClinux port, David McCullough
- Re: Where is the MIPS uClinux port, Mark McChrystal
how to change bootloader's baudrate, lij01
- Re: how to change bootloader's baudrate, Mac Wang
- how to change bootloader's baudrate, lij01
Re: m68k toolchain, Richard Klingler
- Re: m68k toolchain, Matthias Schoeldgen
  - Re: m68k toolchain, Richard Klingler
    - Re: m68k toolchain, Matthias Schoeldgen
    - Password, Shankar Rajendran
uCliunx-2.5.39uc0 is out now, Greg Ungerer
serial port driver help needed....., Thomas Chen
about freeswan, 이창수
question about MTD and Kernel-mode alignment trap handler, Y.H. Park
- Re: question about MTD and Kernel-mode alignment trap handler, Greg Ungerer
too MUCH info...., Thomas Chen
What's different with uC-libc and uClibc, Kang Minfeng-a18629
- Re: What's different with uC-libc and uClibc, Uwe Beutin
  - Re: What's different with uC-libc and uClibc, Richard Klingler
    - Re: What's different with uC-libc and uClibc, Uwe Beutin
USB slave, Kenneth Porter
- Re: USB slave, Markus Pietrek
- RE: USB slave, Borracini Evandro-R45188
  - RE: USB slave, Kenneth Porter
TCP problem in uClinux, Subash Kalbarga
Support for Multi-Ice, Juan Solsona
uClinux-dist-20020927 is out now!, Greg Ungerer
- scripts/mkdep, Richard Klingler
- Re: uClinux-dist-20020927 is out now!, Uwe Beutin
  - Re: uClinux-dist-20020927 is out now!, Phil Wilshire
    - Re: uClinux-dist-20020927 is out now!, Greg Ungerer
    - Re: uClinux-dist-20020927 is out now!, Greg Ungerer
Problem OpenSSL in shared uC-libc, Anandh M.
- Re: Problem OpenSSL in shared uC-libc, David McCullough
- Re: Problem OpenSSL in shared uC-libc, pauli
- RE: Problem OpenSSL in shared uC-libc, Anandh M.
munmap of non-mapped memory by process, Peter Ogilvy
- USB on uClinux, Sunil Kumar T
  - Re: USB on uClinux, Richard Klingler
  - Re: USB on uClinux, David McCullough
- Re: munmap of non-mapped memory by process, David McCullough
  - Re: munmap of non-mapped memory by process, Peter Ogilvy
Blackfin status, Kenneth Porter
- Re: Blackfin status, mdurrant
  - Re: Blackfin status, Kenneth Porter
Building (manual) m68k-elf, Eric Bosch
Re: cramfs root on a floppy? wrong magic, Michael D. Crawford
- Re: Re: cramfs root on a floppy? wrong magic, Carlos Manuel Duclos Vergara
- cramfs root on a floppy? wrong magic, Michael D. Crawford
  - Re: cramfs root on a floppy? wrong magic, Phil Wilshire
EB01, Johan Thelin
Trouble configuring uClinux kernel, Mike Duncan
- Re: Trouble configuring uClinux kernel, qmai
using gdb/gdbserver with 68ez328, John Jarvis
- Re: using gdb/gdbserver with 68ez328, Frieder Ferlemann
- elf2flt for cygwin & arm-elf: bfd-lib problem, Christian Sauer
- Re: using gdb/gdbserver with 68ez328, David McCullough
- RE: using gdb/gdbserver with 68ez328, Menie, Georges
Binary file format, Yannis Mitsos
- Re: Binary file format, Phil Wilshire
- Re: Binary file format, Greg Ungerer
  - Re: Binary file format, Yannis Mitsos
  - Re: Binary file format, David McCullough
    - Re: Binary file format, Yannis Mitsos
    - Re: Binary file format, David McCullough
    - Re: Binary file format, Yannis Mitsos
Any body can help me?, Guifang Wu
Problem on i960, Elek Robert
- Re: Problem on i960, David McCullough
A problem about bulid uc2.0.38 in RH7.2, 赵宏达
- Re: A problem about bulid uc2.0.38 in RH7.2, Uwe Beutin
  - Re: A problem about bulid uc2.0.38 in RH7.2, 赵宏达
uClinux-2.5.38uc2 released, Greg Ungerer
"Unkown error...", Uwe Beutin
- S3C44BOX, Santosh Bhat
- Re: "Unkown error...", Matthias Schoeldgen
how to notice a application whenever external interrupt is coming ?, JINGSONG LIU
MAC, Maurizio Simonetti
Porting DragonBall-SZ possible???, MG-technik
- Re: Porting DragonBall-SZ possible???, Richard Klingler
  - Re: Porting DragonBall-SZ possible???, Uwe Beutin
    - Re: Porting DragonBall-SZ possible???, Richard Klingler
elf2flt ERROR: Bad reloc type, Wolfgang Paulus
EVB 5407C3 uclinux Network download trouble, Patrice Kadionik
- Re: EVB 5407C3 uclinux Network download trouble, John Hillhouse
  - Re: EVB 5407C3 uclinux Network download trouble, Patrice Kadionik
Does uC-libc support IPC?, Guifang Wu
RidgeRun vs. SnapGear, Frank Oltmanns
- Re: RidgeRun vs. SnapGear, Matthew Natalier
  - Re: RidgeRun vs. SnapGear, Frank Oltmanns
    - RE: RidgeRun vs. SnapGear, Rick Stevenson
    - RE: RidgeRun vs. SnapGear, Frank Oltmanns
cs8900 support for Lineo's Atmel EB40 ls board, pushpa sh
A problem about build 2.4.19 kernel, 赵宏达
- Re: A problem about build 2.4.19 kernel, Greg Ungerer
RE: Accessing internal address space on the ucsimm in uclinux2.4.17, Steven Merrifield
- Re: Accessing internal address space on the ucsimm in uclinux2.4.17, David McCullough
- RE: Accessing internal address space on the ucsimm in uclinux2.4.17, Steven Merrifield
Problem using JFFS on 5272C3, Yves CLOUSIER
- Re: Problem using JFFS on 5272C3, Marcos Lois Bermúdez
- RE: Problem using JFFS on 5272C3, Yves CLOUSIER
  - RE: Problem using JFFS on 5272C3, Marcos Lois Bermúdez
    - Re: Problem using JFFS on 5272C3, Phil Wilshire
- RE: Problem using JFFS on 5272C3, Yves CLOUSIER
  - Re: Problem using JFFS on 5272C3, Phil Wilshire
  - Re: Problem using JFFS on 5272C3, Bernhard Kuhn
- RE: Problem using JFFS on 5272C3, Yves CLOUSIER
  - Re: Problem using JFFS on 5272C3, Bernhard Kuhn
- RE: Problem using JFFS on 5272C3, Yves CLOUSIER
  - m68k toolchain, Richard Klingler
    - Re: m68k toolchain, Matthias Schoeldgen
  - Re: Problem using JFFS on 5272C3, Bernhard Kuhn
problems with configuring uClinux, qmai
Accessing internal address space on the ucsimm in uclinux 2.4.17, John Jarvis
- Re: Accessing internal address space on the ucsimm in uclinux2.4.17, Phil Wilshire
  - Re: Accessing internal address space on the ucsimm in uclinux2.4.17, John Jarvis
Implement my ide interface, Marcos Lois Bermúdez
Patch for M5272 power saving, Frieder Ferlemann
Booting Problem, Rajendra Kumar
- Booting Problem, Rajendra Kumar
problem about floating point support, Y.H. Park
- Re: problem about floating point support, Erwin Authried
  - Re: problem about floating point support, Erik Andersen
    - Re: problem about floating point support, Erwin Authried
    - Re: problem about floating point support, Erik Andersen
  - Re: problem about floating point support, Y.H. Park
    - Re: problem about floating point support, Erwin Authried
    - Re: problem about floating point support, Y.H. Park
uClib for Hitachi SH family (sh-2), Fabio Giovagnini
2.4 kernel boot problem, thierry
- Re: 2.4 kernel boot problem, Richard Klingler
- Re: Re: 2.4 kernel boot problem, thierry
- Re: Re: 2.4 kernel boot problem, thierry
  - Re: Re: 2.4 kernel boot problem, Richard Klingler
- Re: Re: Re: 2.4 kernel boot problem, thierry
  - Re: 2.4 kernel boot problem, Richard Klingler
- Re: 2.4 kernel boot problem, Richard Klingler
- Re: Re: 2.4 kernel boot problem, thierry
  - Re: Re: 2.4 kernel boot problem, Richard Klingler
- Re: Re: Re: 2.4 kernel boot problem, Thierry Zhong
how to build a correct user image?, lmc83
- Re: how to build a correct user image?, lmc83
- Re: how to build a correct user image?, Matthias Schoeldgen
C++ problem with operator new, James McLaughlin
How to implement boa 0.94.13, Uwe Beutin
- Re: How to implement boa 0.94.13, Jon Nelson
  - Re: [uClibc]How to implement boa 0.94.13, Uwe Beutin
problem in building busybox, lmc83
- Re: problem in building busybox, David McCullough
ucsimm flash, L�pez
- Re: ucsimm flash, Richard Klingler
- Re: ucsimm flash, Phil Wilshire
  - Re: ucsimm flash, L�pez
    - Re: ucsimm flash, Uwe Beutin
    - Re: ucsimm flash, Sascha Smejkal
uClinux-2.5.38uc0 is out, Greg Ungerer
- Re: uClinux-2.5.38uc0 is out, Jay Vaughan
  - Re: uClinux-2.5.38uc0 is out, David McCullough
    - Re: uClinux-2.5.38uc0 is out, Jay Vaughan
  - Re: uClinux-2.5.38uc0 is out, Greg Ungerer
    - Re: uClinux-2.5.38uc0 is out, Jay Vaughan
    - Re: uClinux-2.5.38uc0 is out, Greg Ungerer
    - Re: uClinux-2.5.38uc0 is out, Jay Vaughan
- RE: uClinux-2.5.38uc0 is out, Menie, Georges
  - Re: uClinux-2.5.38uc0 is out, Greg Ungerer
- RE: uClinux-2.5.38uc0 is out, Menie, Georges
  - Re: uClinux-2.5.38uc0 is out, Greg Ungerer
problem with big malloc(), Matthias Welwarsky
- Re: problem with big malloc(), David McCullough
  - Re: problem with big malloc(), Matthias Welwarsky
    - Re: problem with big malloc(), David McCullough
Re: PPPD, Greg Ungerer
Installation instructions for gdb & gdbserver on ARM7TDMI, Bernhard Kuhn
Strange M5249C3 problem .., Lars Segerlund
- pthreads, D. Peter Siddons
  - Re: pthreads, Bernhard Kuhn
    - Re: pthreads, D. Peter Siddons
- Re: Strange M5249C3 problem .., Greg Ungerer
  - Re: Strange M5249C3 problem .., Lars Segerlund
uClinux-dist available from CVS, David McCullough
Re: uClinux patches against 2.5.30, Greg Ungerer
- Message not available
  - Re: uClinux patches against 2.5.30, Greg Ungerer
    - Message not available
    - Re: uClinux patches against 2.5.30, Greg Ungerer
    - Message not available
    - Re: uClinux patches against 2.5.30, Greg Ungerer
cannot execute...?, Uwe Beutin
- Re: cannot execute...?, Greg Ungerer
  - Re: cannot execute...?, Uwe Beutin
    - Re: cannot execute...?, Matthias Schoeldgen
    - Re: cannot execute...?, Uwe Beutin
    - Re: cannot execute...?, Sascha Smejkal
    - Re: cannot execute...?, Uwe Beutin
    - Re: cannot execute...?, Greg Ungerer
- RE: cannot execute...?, Yves CLOUSIER
h8300-hitachi-hms vs h8300-unknown-coff, Alejandro Paz
- Re: h8300-hitachi-hms vs h8300-unknown-coff, Fabio Giovagnini
How can my kernel boot up automatically, joky
- Re: How can my kernel boot up automatically, Richard Klingler
- Re: How can my kernel boot up automatically, MG-technik
- Re: Re: How can my kernel boot up automatically, Thierry Zhong
  - Re: Re: How can my kernel boot up automatically, Richard Klingler
Still a strange problem ... perhaps hardware .., Lars Segerlund
- Re: Still a strange problem ... perhaps hardware .., Greg Ungerer
  - Re: Still a strange problem ... perhaps hardware .., Lars Segerlund
arm-elf-xxx vs arm-linux-xxx, lmc83
- Re: arm-elf-xxx vs arm-linux-xxx, David McCullough
  - Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
    - Re: arm-elf-xxx vs arm-linux-xxx, David McCullough
    - Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
    - Re: arm-elf-xxx vs arm-linux-xxx, David McCullough
    - Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
question about kernel_thread, lmc83
- Re: question about kernel_thread, Greg Ungerer
Halt after mounting root fs ?, Lars Segerlund
Missing bits/ipc.h and sem.h AND Semaphore problems in uClinux 2.0.381pre7, Tan Chee Wei
- Re: Missing bits/ipc.h and sem.h AND Semaphore problems in uClinux 2.0.381pre7, Norman Shulman
C++ compile fails..., Ivan Ng
RE: mail list archive, Juan Solsona
- RE: mail list archive, Fabrice Gautier
  - Re: mail list archive, D. Peter Siddons
- Re: mail list archive, vincent_kuo
XIP Questions, Juan Solsona
- Re: XIP Questions, David McCullough
Still problems .., Lars Segerlund
- Re: Still problems .., Heiko Degenhardt
  - Re: Still problems .., Lars Segerlund
Some building problems ..., Lars Segerlund
- Re: Some building problems ..., David McCullough
IDE on Coldfire, Richard Klingler
My work on uClinux-2.0.x for Hitachi Sh-2, Fabio Giovagnini
How to keep the user data?, 赵宏达
- Re: How to keep the user data?, Kendrick Hamilton
- Re: How to keep the user data?, joky
  - Re: How to keep the user data?, 赵宏达
Request: brctl vtund, CairnsNet Support
- Re: Request: brctl vtund, Greg Ungerer
how to use a free function to free a space from malloc ?, JINGSONG LIU
how to use a free function to free a space from malloc ?, JINGSONG LIU
- Re: how to use a free function to free a space from malloc ?, Casey Jaymes
uClinux-2.5.36uc0 is up, Greg Ungerer
Glib on uClinux-dist, Borracini Evandro-R45188
How to verify that executable is using Shared lib, Benny Chen
- Re: How to verify that executable is using Shared lib, David McCullough
  - Re: How to verify that executable is using Shared lib, Benny Chen
Question about what file system I should use, Y.H. Park
Kernel panic: can't allocate root vfsmount, joky
- Re: Kernel panic: can't allocate root vfsmount, Thomas Chen
- Re: Kernel panic: can't allocate root vfsmount, Greg Ungerer
- Re: Re: Kernel panic: can't allocate root vfsmount, joky
  - Re: Kernel panic: can't allocate root vfsmount, Thomas Chen
  - Re: Kernel panic: can't allocate root vfsmount, Greg Ungerer
- Re: Re: Kernel panic: can't allocate root vfsmount, joky
- Re: Re: Kernel panic: can't allocate root vfsmount, joky
Big app on uClinux, Changwoo Ryu
- Re: Big app on uClinux, David McCullough
  - Re: Big app on uClinux, Changwoo Ryu
    - Re: Big app on uClinux, David McCullough
compile problem?, danny can
- Re: compile problem?, David McCullough
Serial EEPROM and uC5272, Sascha Smejkal
- Re: Serial EEPROM and uC5272, Phil Wilshire
  - Re: Serial EEPROM and uC5272, Sascha Smejkal
    - Re: Serial EEPROM and uC5272, Uwe Beutin
    - Re: Serial EEPROM and uC5272, Sascha Smejkal
small build problem ..., Lars Segerlund
DMA device, Gillon Benoit
- RE: DMA device, Shubhangi Jadhav
  - Re: DMA device, Gillon Benoit
- Re: DMA device, Thomas Chen
problem building arm-elf toolchain, Thomas Chen
- Re: problem building arm-elf toolchain, David McCullough
  - Re: problem building arm-elf toolchain, Thomas Chen
    - Re: problem building arm-elf toolchain, David McCullough
    - Re: problem building arm-elf toolchain, thomas chen
    - Re: problem building arm-elf toolchain, David McCullough
    - Re: problem building arm-elf toolchain, Thomas Chen
    - Re: problem building arm-elf toolchain, David McCullough
    - Re: problem building arm-elf toolchain, Thomas Chen
    - Re: problem building arm-elf toolchain, David McCullough
    - Re: problem building arm-elf toolchain, Frieder Ferlemann
    - touble building uClinux dist (uclib and user stuff), Thomas Chen
    - Re: touble building uClinux dist (uclib and user stuff), David McCullough
    - Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
    - Re: touble building uClinux dist (uclib and user stuff), Phil Wilshire
    - Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
    - Re: touble building uClinux dist (uclib and user stuff), David McCullough
    - Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
    - Re: problem building uclinux-dist, Thomas Chen
- Re: problem building arm-elf toolchain, qmai
how to see the kernel boot message?, zhongxin
- Re: how to see the kernel boot message?, Thomas Chen
  - Re: how to see the kernel boot message?, Kendrick Hamilton
- Re: how to see the kernel boot message?, Heiko Degenhardt
g++, Robert VanRooyen
- Re: g++, Matthew Natalier
Keeping 'dist' in sync with CVS ..., Jay Vaughan
- Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
  - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
  - Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
    - Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
    - Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
    - Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
  - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
    - Re: Keeping 'dist' in sync with CVS ..., Vadim Lebedev
    - Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - Re: Keeping 'dist' in sync with CVS ..., David McCullough
    - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., David McCullough
    - Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
    - Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
    - Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
    - ide_get_lock(), Richard Klingler
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
    - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., Richard Klingler
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - lcd, Richard Klingler
    - Re: Keeping 'dist' in sync with CVS ..., David McCullough
    - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., David McCullough
    - Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
    - Re: Keeping 'dist' in sync with CVS ..., David McCullough
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., Matthew Natalier
    - ide harddrives under uclinux-2.4.x, Richard Klingler
    - Re: ide harddrives under uclinux-2.4.x, Frieder Ferlemann
    - Re: ide harddrives under uclinux-2.4.x, Richard Klingler
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
    - Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
    - mail list archive, D. Peter Siddons
    - Re: Keeping 'dist' in sync with CVS ..., Heiko Degenhardt
    - Wanted: example certificate for Boa (SSL), Peter D. Gray
    - Re: Wanted: example certificate for Boa (SSL), Uwe Beutin
    - Re: Wanted: example certificate for Boa (SSL), Peter D. Gray
- RE: Keeping 'dist' in sync with CVS ..., Menie, Georges
  - Re: Keeping 'dist' in sync with CVS ..., David McCullough
PPPD with PAP/CHAP and uClinux-2.4.x, David Beamonte
- Re: PPPD with PAP/CHAP and uClinux-2.4.x, Greg Ungerer
  - Re: PPPD with PAP/CHAP and uClinux-2.4.x, David Beamonte
    - Re: PPPD with PAP/CHAP and uClinux-2.4.x, Greg Ungerer
RE: Building on Cygwin, Banasik, Paul M
Flash read/write access on a uCdimm, Uwe Beutin
- Re: Flash read/write access on a uCdimm, Phil Wilshire
- AW: Flash read/write access on a uCdimm, Juergen Mueller
  - Re: AW: Flash read/write access on a uCdimm, Uwe Beutin
gcc vs m68k-elf-gcc, danny can
`make distclean' leftovers, Miles Bader
question about building /sbin/init, Thomas Chen
Bad magic/ rev (16843008,need 2) error, Eric Bosch
- Re: Bad magic/ rev (16843008,need 2) error, David McCullough
- RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
  - Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
    - Re: Bad magic/ rev (16843008,need 2) error, Kendrick Hamilton
- Re: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
- Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
- RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
  - Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
- RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
Interrupt vector initialization, Vadim Lebedev
- Re: Interrupt vector initialization, Erwin Authried
- Re: Interrupt vector initialization, Thomas Chen
bintob howto?, Y.L. Leon
- Re: bintob howto?, Phil Wilshire
compilation error of ifattach, Thomas Chen
- Re: compilation error of ifattach, Erik Andersen
  - Information on uClinux Course, sriram hariharan
  - Re: compilation error of ifattach, Thomas Chen
  - Re: compilation error of ifattach, Thomas Chen
uCdimm and MTD support, Uwe Beutin
- uCdimm and MTD support, Uwe Beutin
  - Re: uCdimm and MTD support, Heiko Degenhardt
pthreads Problem, Rajendra Kumar
Fw: How to set the ldscript ??, Santosh Bhat
inetd error, #YEE FONG HUAT#
- Re: inetd error, Greg Ungerer
- RE: inetd error, #YEE FONG HUAT#
  - Re: inetd error, Greg Ungerer
- RE: inetd error, #YEE FONG HUAT#
  - Re: inetd error, Greg Ungerer
RE: uClinux mkdep error, 20020714, Banasik, Paul M
- Re: RE: uClinux mkdep error, 20020714, David McCullough
- RE: RE: uClinux mkdep error, 20020714, Banasik, Paul M
  - Re: RE: uClinux mkdep error, 20020714, David McCullough
minix sheel problem, 이창수
- Re: minix sheel problem, Erwin Authried
  - Re: minix sheel problem, Jeff Dionne
Why is the Bash not compiled ?, 이창수
- Re: Why is the Bash not compiled ?, David McCullough
problems building elf2flt, Wolfgang Paulus
- Re: problems building elf2flt, Greg Ungerer
uClinux-2.5.35uc0, Greg Ungerer
BINFMT_FLAT header problem....., Thomas Chen
- Re: BINFMT_FLAT header problem....., lmc83
what is the SIZE of the bFLT header???? 0x20 or 0x40???, Thomas Chen
problem with "gethwaddr() and SIOCADDRT(error)", lij01
- Re: problem with "gethwaddr() and SIOCADDRT(error)", vincent_kuo
  - How to set the ldscript ??, Santosh Bhat
    - Re: How to set the ldscript ??, Thomas Chen
- RE: problem with "gethwaddr() and SIOCADDRT(error)", Steven Merrifield
problem between bootstrap mode and normal mode, lij01
- RE: problem between bootstrap mode and normal mode, Steven Merrifield
  - Re: problem between bootstrap mode and normal mode, Jeff Dionne
TEXTADDR and DRAM_BASE, thomas chen
TEXTADDR and DRAM_BASE.... what are their relationship?, Thomas Chen
problem with "kernel BUG at slab.c:994", Thomas Chen
- Re: problem with "kernel BUG at slab.c:994", David McCullough
gdb support for uCsimm, Binoj.G.S
- Re: gdb support for uCsimm, Uwe Beutin
i am getting error from page_alloc, Thomas Chen
MAX_ORDER... why is it 13???, Thomas Chen
- Re: MAX_ORDER... why is it 13???, Carsten Neumann
  - Re: MAX_ORDER... why is it 13???, Thomas Chen
what is the purpose and meaning for the PAGE???, Thomas Chen
- Re: what is the purpose and meaning for the PAGE???, David McCullough
page_alloc2 or page_alloc, Thomas Chen
- Re: page_alloc2 or page_alloc, David McCullough
  - bootmem allocation...., Thomas Chen
a very basic question, Thomas Chen
- Re: a very basic question, Phil Wilshire
uClinus with NIBA, #YEE FONG HUAT#
arm7tdmi, Gillon Benoit
- Re: arm7tdmi, Phil Wilshire
  - Re: arm7tdmi, Gillon Benoit
    - Re: arm7tdmi, Phil Wilshire
    - Re: arm7tdmi, Gillon Benoit
    - Re: arm7tdmi, Phil Wilshire
- Re: arm7tdmi, Thomas Chen
About pthread on uclinux, Rajendra Kumar
I wonder version of 'boa', 윤성환
Sh2-elf compilation problem, Anurag.R
- Re: Sh2-elf compilation problem, Fabio Giovagnini
- Re: Sh2-elf compilation problem, Phil Wilshire
gdbserver for uClinux arm?, Bernhard Kuhn
- Re: gdbserver for uClinux arm?, Erwin Authried
RE: Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Fabrice Gautier
does uClinux support intel PXA250???, Thomas Chen
- Re: does uClinux support intel PXA250???, Robert Schwebel
Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
- Re: Any interested in a H8S port ?, plus notes on H8300H, Fabio Giovagnini
- Re: Any interested in a H8S port ?, plus notes on H8300H, Scott Howard
- Re: Any interested in a H8S port ?, plus notes on H8300H, Yoshinori Sato
  - Re: Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
    - Re: Any interested in a H8S port ?, plus notes on H8300H, Yoshinori Sato
- Re: Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
RTLinux insmod, L�pez
- Re: RTLinux insmod, Phil Wilshire
  - Re: RTLinux insmod, Phil Wilshire
ROM FS..., thomas chen
- Re: ROM FS..., Thomas Chen
- Re: ROM FS..., David McCullough
  - Re: ROM FS..., thomas chen
    - Re: ROM FS..., David McCullough
    - arm tool chain question (2.95.3), Thomas Chen
    - Re: arm tool chain question (2.95.3), David McCullough
  - any support of uClinux for intel PXA250, thomas chen
    - Re: any support of uClinux for intel PXA250, Greg Ungerer
    - Re: any support of uClinux for intel PXA250, Thomas Chen
    - Re: any support of uClinux for intel PXA250, Phil Wilshire
    - Re: any support of uClinux for intel PXA250, Greg Ungerer
- Re: ROM FS..., Greg Ungerer
  - Re: ROM FS..., thomas chen
    - Re: ROM FS..., Greg Ungerer
  - Re: ROM FS..., Thomas Chen
How to port or make gdbserver for ARM7TDMI, Y.H. Park
- ds1302 patch for 2.4.x, Richard Klingler
- Re: How to port or make gdbserver for ARM7TDMI, Greg Ungerer
  - Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park
    - Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
    - Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park
    - Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park
    - Re: How to port or make gdbserver for ARM7TDMI, Bernhard Kuhn
    - Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
- RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
  - Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
- RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
  - Re: How to port or make gdbserver for ARM7TDMI, Norman Shulman
- RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
Sleeping user process., David Braendler
- Re: Sleeping user process., Greg Ungerer
  - Re: Sleeping user process., pauli
    - Re: Sleeping user process., Carsten Neumann
    - Re: Sleeping user process., David Braendler
    - Re: Sleeping user process., Greg Ungerer
    - Re: Sleeping user process., David Braendler
    - Re: Sleeping user process., Greg Ungerer
  - Trouble with SIGIO/signals in uCLinux/mcf5272?, Jay Vaughan
- RE: Sleeping user process., Rick Stevenson
  - Re: Sleeping user process., Phil Wilshire
Re: C++ w/glibc, Ivan Ng
ROMFS, Thomas Chen
- Re: ROMFS, Greg Ungerer
5407 bdm debug problem, Mark Abbate
Building 'just' user apps (no kernel, etc)., Jay Vaughan
- Re: Building 'just' user apps (no kernel, etc)., Greg Ungerer
- Re: Building 'just' user apps (no kernel, etc)., Phil Wilshire
- Re: Building 'just' user apps (no kernel, etc)., David McCullough
  - Re: Building 'just' user apps (no kernel, etc)., Jay Vaughan
    - Re: Building 'just' user apps (no kernel, etc)., David McCullough
    - Re: Building 'just' user apps (no kernel, etc)., Greg Ungerer
IDE interface, marcobuffa
sorry if this is a basic question... what is the frequeny of the system tick supposed to be?, Thomas Chen
- Re: sorry if this is a basic question... what is the frequeny of the system tick supposed to be?, David McCullough
the meaning of MAGIC_ROM_PTR ?, Y.H. Park
- Re: the meaning of MAGIC_ROM_PTR ?, David McCullough
  - Re: the meaning of MAGIC_ROM_PTR ?, Mugavary
bad_super_trap problem with uclinux 2.0.38 (newbie questions), SANSONI Benoit
- Re: bad_super_trap problem with uclinux 2.0.38 (newbie questions), Thomas Chen
- Re: bad_super_trap problem with uclinux 2.0.38 (newbie questions), Thomas Chen
Settings for 'standalone' compilation of user app, David Braendler
- stats of coldfire ether, Richard Klingler
  - Re: stats of coldfire ether, Greg Ungerer
    - Re: stats of coldfire ether, Richard Klingler
    - mcast on coldfire, Richard Klingler
    - RE: stats of coldfire ether, Robert Daniels
    - Re: stats of coldfire ether, Greg Ungerer
    - RE: stats of coldfire ether, Robert Daniels
    - RE: stats of coldfire ether, Richard Klingler
    - RE: stats of coldfire ether, Richard Klingler
    - RE: stats of coldfire ether, Richard Klingler
    - RE: stats of coldfire ether, Richard Klingler
    - RE: stats of coldfire ether, Robert Daniels
    - RE: stats of coldfire ether, Richard Klingler
    - Re: stats of coldfire ether, Greg Ungerer
    - Re: stats of coldfire ether, Richard Klingler
    - Re: stats of coldfire ether, Greg Ungerer
    - RE: stats of coldfire ether, Robert Daniels
    - Re: stats of coldfire ether, Greg Ungerer
    - Re: stats of coldfire ether, Richard Klingler
    - Re: stats of coldfire ether, Greg Ungerer
- Re: Settings for 'standalone' compilation of user app, David McCullough
- Re: Settings for 'standalone' compilation of user app, David Braendler
uClinux-2.5.34uc0 out now, Greg Ungerer
- Cross-Compiling gcc-2.95.3, Uwe Beutin
  - Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Uwe Beutin
    - Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Miles Bader
    - mcf_qspi driver for 2.4.x, Richard Klingler
    - Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, David McCullough
    - Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Greg Ungerer
    - Re: Cross-Compiling gcc-2.95.3, Phil Wilshire
Porting cs89x0 net device, Aavan
- RE: Porting cs89x0 net device, Menie, Georges
- RE: Porting cs89x0 net device, Steven Merrifield
Re: sharing irqs on 5206e, Greg Ungerer
Simple "Hello World" on a M5272C3, Greg Robertson
- Re: Simple "Hello World" on a M5272C3, Greg Ungerer
bug in ARMulator, msr instruction, Thomas Eschenbacher
Status of the tool cahin ?, Lars Segerlund
- Re: Status of the tool cahin ?, Greg Ungerer
Using RT-uClinux API 1.x: rt_get_time() and task synchronization, Tan Chee Wei
!!! How to send you my port !!!, Fabio Giovagnini
- Re: !!! How to send you my port !!!, David McCullough
  - Re: !!! How to send you my port !!!, Fabio Giovagnini
  - Message not available
    - Re: !!! How to send you my port !!!, Greg Ungerer
    - Re: !!! How to send you my port !!!, Fabio Giovagnini
    - Message not available
    - Re: !!! How to send you my port !!!, David McCullough
    - Re: !!! How to send you my port !!!, Thomas Chen
    - Re: !!! How to send you my port !!!, David McCullough
cs89x0 issue, Aavan
- Re: cs89x0 issue, Robert Schwebel
FTP Server, Maoyi Fan
- RE: FTP Server, Banasik, Paul M
tracking down the TRANSITION to userland program, Thomas Chen
- Re: tracking down the TRANSITION to userland program, Matthias Welwarsky
  - Re: tracking down the TRANSITION to userland program, Thomas Chen
    - Re: tracking down the TRANSITION to userland program, Matthias Welwarsky
uclinux ioctls, v.nagasrinivas
has anyone seen this uCLINUX 2.4.17 compilation ERROR, thomas chen
palm uClinux, kugan_v
Yet another question... ZFLAT support, Thomas Chen
- Re: Yet another question... ZFLAT support, Jeff Dionne
- Re: Yet another question... ZFLAT support, Erik Andersen
  - Re: Yet another question... ZFLAT support, Thomas Chen
- Re: Yet another question... ZFLAT support, Greg Ungerer
  - Re: Yet another question... ZFLAT support, Thomas Chen
    - Re: Yet another question... ZFLAT support, Greg Ungerer
BAD ADDRESS, Thomas Chen
- QEUSTION ON ZFLAT, thomas chen
- Re: BAD ADDRESS, Jeff Dionne
  - Re: BAD ADDRESS, Thomas Chen
    - Re: BAD ADDRESS, Jeff Dionne
palm, kugan_v
- RE: palm, Dan Trainor
  - Re: palm, David McCullough
Again IDE driver question., Marcos Lois Bermúdez
- Re: Again IDE driver question., Greg Ungerer
uClinux 2.4, Thomas Chen
- ncurses, Richard Klingler
can it be.., v.nagasrinivas
- Re: can it be.., Greg Ungerer
ANOTHER question about verify_area, Thomas Chen
question about genromFS, Thomas Chen
- Re: question about genromFS, Greg Ungerer
char driver question, Marcos Lois Bermúdez
- Re: char driver question, Greg Ungerer
problem with toolchain, qmai
Fwd: [ARMboot-users] missing symbols in GDB, Stephan Linz
- Re: Fwd: [ARMboot-users] missing symbols in GDB, Rolf Peukert
Re: where is sys_setup being called for ARM version of uclinux?, Greg Ungerer
IDE driver, Marcos Lois Bermúdez
- Re: IDE driver, Greg Ungerer
usart B on ARM7TDMI, Dudi Feuer
- Re: usart B on ARM7TDMI, Vadim Lebedev
gdbserver is not supported on ARM?, 윤성환
arm-toolchain v.s. uClibc version, kj_lin
- Re: arm-toolchain v.s. uClibc version, Erik Andersen
Re: QSPI on mcf5272, Ron Fial
- Re: QSPI on mcf5272, Richard Klingler
  - Re: QSPI on mcf5272, Greg Ungerer
- Re: QSPI on mcf5272, Ron Fial
  - Re: QSPI on mcf5272, Greg Ungerer
    - Re: QSPI on mcf5272, Richard Klingler
    - ds1302 driver for 2.4.x, Richard Klingler
    - Re: ds1302 driver for 2.4.x, Greg Ungerer
    - Re: ds1302 driver for 2.4.x, Richard Klingler
- Re: QSPI on mcf5272, Ron Fial
  - Re: QSPI on mcf5272, Greg Ungerer
- Re: QSPI on mcf5272, Ron Fial
  - Re: QSPI on mcf5272, Greg Ungerer
    - stupid question, Richard Klingler
    - Re: stupid question, Markus Pietrek
    - Re: stupid question, Richard Klingler
    - timezones, Richard Klingler
    - Re: timezones, Richard Klingler
    - environment settings, Richard Klingler
    - Re: timezones, Erik Andersen
    - Re: timezones, Richard Klingler
    - Re: timezones, Erik Andersen
    - FTP Client, Shankar Rajendran
    - Re: FTP Client, Greg Ungerer
    - Re: timezones, Carsten Neumann
    - Re: QSPI on mcf5272, Richard Klingler
    - Re: QSPI on mcf5272, Greg Ungerer
    - Re: QSPI on mcf5272, Richard Klingler
    - Re: QSPI on mcf5272, Richard Klingler
    - Re: QSPI on mcf5272, Richard Klingler
    - ds1302.c uClinux-2.4.x, Richard Klingler
- Re: QSPI on mcf5272, mathias . fritzson
CAS for pthreads, Bernhard Kuhn
Please IGNORE this mail, Rajendra Kumar
Something wrong with printbenv, Piotr Landowski
some newbie questions about porting, qmai
- Re: some newbie questions about porting, Greg Ungerer
  - coldfire fec.c ethernet driver, Richard Klingler
    - Re: coldfire fec.c ethernet driver, Greg Ungerer
    - Re: coldfire fec.c ethernet driver, Richard Klingler
  - Re: some newbie questions about porting, qmai
    - Re: some newbie questions about porting, Greg Ungerer
Compile UClinux on Redhat 7.3, Hamid Reza Akbari
About /proc/cpuinfo, Marcos Lois Bermúdez
- Re: About /proc/cpuinfo, Greg Ungerer
Re: IPC problem, Greg Ungerer
- Re: IPC problem, Greg Ungerer
Module Loading Problem - Simple Hello World Module..., Brian
- Re: Module Loading Problem - Simple Hello World Module..., Greg Ungerer
  - Re: Module Loading Problem - Simple Hello World Module..., Brian
    - Re: Module Loading Problem - Simple Hello World Module..., Greg Ungerer
    - Re: Module Loading Problem - Simple Hello World Module..., Brian
Mixing C, C++ causes a linker error, Alex Busteed
- Re: Mixing C, C++ causes a linker error, Kendrick Hamilton
  - Re: Mixing C, C++ causes a linker error, Benny Chen
    - Re: Mixing C, C++ causes a linker error, David McCullough
    - Re: Mixing C, C++ causes a linker error, Benny Chen
    - Re: Mixing C, C++ causes a linker error, David McCullough
uClinux on a SWL3300AP Access poiont - interesting one, Adilson Oliveira
How to use NAT, 이창수
- Re: How to use NAT, vincent_kuo
m68k-tools on PowerPC, Ken Treis
Re: no multicast with coldfire..., Richard Klingler
uClinux-2.4.19-uc1 available, David McCullough
- ide for mcf5272, Richard Klingler
  - Re: ide for mcf5272, Matthew Natalier
doubts about flash, fbertasso
Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Bernhard Kuhn
- Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
  - Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Bernhard Kuhn
    - Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
    - can't allocate root vfsmount, Richard Klingler
    - Re: can't allocate root vfsmount, Richard Klingler
    - Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Greg Ungerer
    - Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Erwin Authried
    - Re: Installation instructions for uClinux-2.4.19-uc0on M5272C3, Bernhard Kuhn
  - Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Jeff Carr
- Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
Add a new platform to uClinux-dist, Davide Ballestrero
- Re: Add a new platform to uClinux-dist, Richard Klingler
Test, Hamid Reza Akbari
- Test, Hamid Reza Akbari
- test, Piotr Landowski
- test, Piotr Landowski
[Documentaion] M5272C3 pthreads howto, Bernhard Kuhn
- Externel bus interface.., Shankar Rajendran
  - really close to boot from flash, Richard Klingler
    - Re: really close to boot from flash, Jeff Carr
    - Re: really close to boot from flash, Greg Ungerer
    - Re: really close to boot from flash, Richard Klingler
    - booting from flash works (o;, Richard Klingler
    - Re: booting from flash works (o;, Greg Ungerer
- RE: [Documentaion] M5272C3 pthreads howto, David Chan
  - Re: [Documentaion] M5272C3 pthreads howto, David McCullough
  - Re: [Documentaion] M5272C3 pthreads howto, Bernhard Kuhn
    - RE: [Documentaion] M5272C3 pthreads howto, David Chan
    - Re: [Documentaion] M5272C3 pthreads howto, Bernhard Kuhn
    - Re: [Documentaion] M5272C3 pthreads howto, Erik Andersen
Ssh & users, Kurt
- Re: Ssh & users, Matthew Natalier
Using FAT file system, mathias . fritzson
- Re: Using FAT file system, David McCullough
  - unable to expand ramfs.img, Shankar Rajendran
- Re: Using FAT file system, mathias . fritzson
(unknown), Hamid Reza Akbari
- (unknown), Guifang Wu
  - RE:, Robert Daniels
    - RE:, Kendrick Hamilton
    - Re: IPC, Chee-Wei
    - Re: IPC, Suresh Singh K.
    - e2fsprogs, Richard Klingler
    - Re: e2fsprogs, Greg Ungerer
    - RE: IPC, Robert Daniels
    - ´ð¸´: [uClinux-dev] IPC & Interrupt, Guifang Wu
    - Re: [uClinux-dev] ´ð¸´: [uClinux-dev] IPC & Interrupt, Piotr Landowski
    - RE: [uClinux-dev] ´ð¸´: [uClinux-dev] IPC & Interrupt, Robert Daniels
- (unknown), joky
- (unknown), joky
Memory management question, Peter Ogilvy
- Re: Memory management question, David McCullough
Where to place driver include files, Peter Ogilvy
multicast running now on fec 5272, Richard Klingler
Using frank_app in RT-patched uClinux, Tan Chee Wei
- Re: Using frank_app in RT-patched uClinux, Phil Wilshire
  - QSPI on mcf5272, Richard Klingler
    - Re: QSPI on mcf5272, Mark Yeck
- RE: Re: Using frank_app in RT-patched uClinux, Tan Chee Wei
Re: problem using gdbserver with ucsimm, Francis Rastrilla Agud
- Re: problem using gdbserver with ucsimm, rafa lopez
stable uClibc for uClinux-2.4.17/armnommu, Markus Pietrek
- Re: stable uClibc for uClinux-2.4.17/armnommu, David McCullough
Digest of the list?, Christian Hack
compile error in PPPOE, Y.H. Park
Re: Problem with elf2flt, Greg Ungerer
unable to expand the ramfs.img, Shankar Rajendran
- Re: unable to expand the ramfs.img, Greg Ungerer
uClinux-2.5.33uc0, Greg Ungerer
Re: Q : Shared/dynamic loading librairies, DALLEMAGNE Philippe
- Re: Q : Shared/dynamic loading librairies, David McCullough
- Re: Q : Shared/dynamic loading librairies, pauli
- Re: Q : Shared/dynamic loading librairies, vincent_kuo
- Re: Q : Shared/dynamic loading librairies, vincent_kuo
- Re: Q : Shared/dynamic loading librairies, vincent_kuo
802.11, Naprstek Jiri-R54332
RE: ROMFS location problem-->kernel panic., Ilan Pollak
- Re: ROMFS location problem-->kernel panic., Jeff Dionne
  - Re: ROMFS location problem-->kernel panic., Shankar Rajendran
- Re: ROMFS location problem-->kernel panic., Pushpa
RE: Arm AXD Debugger, Ilan Pollak
SNMPD & BOA MEMORY LEAK, Erdem Gunes
- Re: SNMPD & BOA MEMORY LEAK, Jim Treadway
  - Flash Dot, Casey Jaymes
Re: Unknown error 14 on AT91, Thomas Eschenbacher
- Re: Unknown error 14 on AT91, Erwin Authried