uclinux.devel (date)

uclinux.devel (date)

September 30, 2002

RE: [BusyBox] Questions about file sizes, Uwe Beutin
Re: Where is the MIPS uClinux port, Mark McChrystal
Re: Environmet variables..., Uwe Beutin
Re: Environmet variables..., Uwe Beutin
s3c44b0x, tapu
Re: undefined reference, Phil Wilshire
undefined reference, Helmut Schröder
Re: What's different with uC-libc and uClibc, Uwe Beutin
Environmet variables..., Uwe Beutin
Re: [fastdep] Error 135, Phil Wilshire
another newbie question about uClinux, qmai
Re: USB slave, Markus Pietrek
Re: Binary file format, Yannis Mitsos
Re: EVB 5407C3 uclinux Network download trouble, Patrice Kadionik
semaphore.h, danny can
Re: RSP 7+, Sunil Kumar T
[fastdep] Error 135, ananda . vardhan
Re: RSP 7+, ananda . vardhan
Does uClinux have 'Intel PC Card Master Controller Chip 6722' driver code~?, Pusik Park
Re: RSP 7+, thomas chen
Re: LCD (text) and 4x4 keypad driver......., Richard Klingler
RE: Problem OpenSSL in shared uC-libc, Anandh M.
RSP 7+, ananda . vardhan
LCD (text) and 4x4 keypad driver......., thomas chen
Re: munmap of non-mapped memory by process, Peter Ogilvy
Re: uClinux-dist-20020927 is out now!, Greg Ungerer
Where is the MIPS uClinux port, David McCullough
Re: question about MTD and Kernel-mode alignment trap handler, Greg Ungerer

September 29, 2002

Re: Problem using JFFS on 5272C3, Bernhard Kuhn
Re: Problem OpenSSL in shared uC-libc, pauli
Re: What's different with uC-libc and uClibc, Richard Klingler
Re: What's different with uC-libc and uClibc, Uwe Beutin
Re: how to change bootloader's baudrate, Mac Wang
Password, Shankar Rajendran
Re: m68k toolchain, Matthias Schoeldgen
Re: m68k toolchain, Richard Klingler
how to change bootloader's baudrate, lij01
how to change bootloader's baudrate, lij01
Re: m68k toolchain, Matthias Schoeldgen

September 28, 2002

Re: m68k toolchain, Richard Klingler
uCliunx-2.5.39uc0 is out now, Greg Ungerer
Re: uClinux-dist-20020927 is out now!, Greg Ungerer
serial port driver help needed....., Thomas Chen
about freeswan, 이창수
Re: problem about floating point support, Y.H. Park
Re: m68k toolchain, Matthias Schoeldgen
question about MTD and Kernel-mode alignment trap handler, Y.H. Park
too MUCH info...., Thomas Chen
What's different with uC-libc and uClibc, Kang Minfeng-a18629

September 27, 2002

Re: uClinux-dist-20020927 is out now!, Phil Wilshire
Re: uClinux-dist-20020927 is out now!, Uwe Beutin
Re: Blackfin status, Kenneth Porter
RE: USB slave, Kenneth Porter
Re: Blackfin status, mdurrant
RE: USB slave, Borracini Evandro-R45188
USB slave, Kenneth Porter
TCP problem in uClinux, Subash Kalbarga
scripts/mkdep, Richard Klingler
Support for Multi-Ice, Juan Solsona
Re: problem with big malloc(), David McCullough
uClinux-dist-20020927 is out now!, Greg Ungerer
Re: munmap of non-mapped memory by process, David McCullough
Re: USB on uClinux, David McCullough
Re: Problem OpenSSL in shared uC-libc, David McCullough
Re: Binary file format, David McCullough
Re: USB on uClinux, Richard Klingler
Problem OpenSSL in shared uC-libc, Anandh M.
m68k toolchain, Richard Klingler
USB on uClinux, Sunil Kumar T
RE: Problem using JFFS on 5272C3, Yves CLOUSIER
Re: Binary file format, Yannis Mitsos
munmap of non-mapped memory by process, Peter Ogilvy
Re: "Unkown error...", Matthias Schoeldgen
Re: Trouble configuring uClinux kernel, qmai
Re: Re: cramfs root on a floppy? wrong magic, Carlos Manuel Duclos Vergara
Re: using gdb/gdbserver with 68ez328, David McCullough
Re: Binary file format, David McCullough
Re: Problem on i960, David McCullough
Blackfin status, Kenneth Porter

September 26, 2002

Building (manual) m68k-elf, Eric Bosch
Re: cramfs root on a floppy? wrong magic, Phil Wilshire
cramfs root on a floppy? wrong magic, Michael D. Crawford
Re: cramfs root on a floppy? wrong magic, Michael D. Crawford
Re: Problem using JFFS on 5272C3, Bernhard Kuhn
elf2flt for cygwin & arm-elf: bfd-lib problem, Christian Sauer
Re: using gdb/gdbserver with 68ez328, Frieder Ferlemann
Re: Binary file format, Yannis Mitsos
RE: using gdb/gdbserver with 68ez328, Menie, Georges
Re: Re: Re: 2.4 kernel boot problem, Thierry Zhong
EB01, Johan Thelin
Re: Binary file format, Greg Ungerer
Trouble configuring uClinux kernel, Mike Duncan
Re: uClinux-2.5.38uc0 is out, Greg Ungerer
using gdb/gdbserver with 68ez328, John Jarvis
RE: Problem using JFFS on 5272C3, Yves CLOUSIER
RE: RidgeRun vs. SnapGear, Frank Oltmanns
Re: Problem using JFFS on 5272C3, Bernhard Kuhn
Re: Binary file format, Phil Wilshire
Re: Problem using JFFS on 5272C3, Phil Wilshire
RE: Problem using JFFS on 5272C3, Yves CLOUSIER
Binary file format, Yannis Mitsos
Any body can help me?, Guifang Wu
Problem on i960, Elek Robert
RE: uClinux-2.5.38uc0 is out, Menie, Georges
Re: problem about floating point support, Erwin Authried
Re: A problem about bulid uc2.0.38 in RH7.2, 赵宏达
RE: RidgeRun vs. SnapGear, Rick Stevenson
Re: A problem about bulid uc2.0.38 in RH7.2, Uwe Beutin
Re: RidgeRun vs. SnapGear, Frank Oltmanns
Re: Re: 2.4 kernel boot problem, Richard Klingler
A problem about bulid uc2.0.38 in RH7.2, 赵宏达
uClinux-2.5.38uc2 released, Greg Ungerer
Re: Porting DragonBall-SZ possible???, Richard Klingler
Re: uClinux-2.5.38uc0 is out, Greg Ungerer
S3C44BOX, Santosh Bhat
Re: Re: 2.4 kernel boot problem, thierry
Re: problem about floating point support, Y.H. Park

September 25, 2002

Re: Porting DragonBall-SZ possible???, Uwe Beutin
"Unkown error...", Uwe Beutin
Re: RidgeRun vs. SnapGear, Matthew Natalier
how to notice a application whenever external interrupt is coming ?, JINGSONG LIU
MAC, Maurizio Simonetti
Re: Porting DragonBall-SZ possible???, Richard Klingler
Porting DragonBall-SZ possible???, MG-technik
elf2flt ERROR: Bad reloc type, Wolfgang Paulus
Re: EVB 5407C3 uclinux Network download trouble, John Hillhouse
Re: Wanted: example certificate for Boa (SSL), Peter D. Gray
Re: Problem using JFFS on 5272C3, Phil Wilshire
Re: Wanted: example certificate for Boa (SSL), Uwe Beutin
RE: uClinux-2.5.38uc0 is out, Menie, Georges
EVB 5407C3 uclinux Network download trouble, Patrice Kadionik
Does uC-libc support IPC?, Guifang Wu
RidgeRun vs. SnapGear, Frank Oltmanns
RE: Problem using JFFS on 5272C3, Marcos Lois Bermúdez
cs8900 support for Lineo's Atmel EB40 ls board, pushpa sh
Re: A problem about build 2.4.19 kernel, Greg Ungerer
Re: 2.4 kernel boot problem, Richard Klingler
Re: 2.4 kernel boot problem, Richard Klingler
Re: uClinux patches against 2.5.30, Greg Ungerer
RE: Problem using JFFS on 5272C3, Yves CLOUSIER
A problem about build 2.4.19 kernel, 赵宏达
Re: problem with big malloc(), Matthias Welwarsky
Re: Re: Re: 2.4 kernel boot problem, thierry
RE: Accessing internal address space on the ucsimm in uclinux2.4.17, Steven Merrifield
Re: Accessing internal address space on the ucsimm in uclinux2.4.17, David McCullough

September 24, 2002

RE: Accessing internal address space on the ucsimm in uclinux2.4.17, Steven Merrifield
Re: Accessing internal address space on the ucsimm in uclinux2.4.17, John Jarvis
Re: Problem using JFFS on 5272C3, Marcos Lois Bermúdez
Re: problem about floating point support, Erik Andersen
RE: cannot execute...?, Yves CLOUSIER
Problem using JFFS on 5272C3, Yves CLOUSIER
Wanted: example certificate for Boa (SSL), Peter D. Gray
Re: problem about floating point support, Erwin Authried
Re: Accessing internal address space on the ucsimm in uclinux2.4.17, Phil Wilshire
Re: problem about floating point support, Erik Andersen
Re: uClinux-2.5.38uc0 is out, Jay Vaughan
problems with configuring uClinux, qmai
Accessing internal address space on the ucsimm in uclinux 2.4.17, John Jarvis
Implement my ide interface, Marcos Lois Bermúdez
Re: uClinux patches against 2.5.30, Greg Ungerer
Re: ucsimm flash, Sascha Smejkal
Re: uClinux-2.5.38uc0 is out, Greg Ungerer
Re: uClinux-2.5.38uc0 is out, Jay Vaughan
Re: problem about floating point support, Erwin Authried
Re: ucsimm flash, Uwe Beutin
Re: cannot execute...?, Uwe Beutin
Re: uClinux-2.5.38uc0 is out, Greg Ungerer
Re: problem with big malloc(), David McCullough
Re: uClinux-2.5.38uc0 is out, Jay Vaughan
Re: uClinux-2.5.38uc0 is out, David McCullough
Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
Re: Re: 2.4 kernel boot problem, Richard Klingler
Booting Problem, Rajendra Kumar
Re: uClinux-2.5.38uc0 is out, Jay Vaughan
Trouble with SIGIO/signals in uCLinux/mcf5272?, Jay Vaughan
Patch for M5272 power saving, Frieder Ferlemann
Booting Problem, Rajendra Kumar
Re: Re: 2.4 kernel boot problem, thierry
Re: Re: 2.4 kernel boot problem, thierry
problem about floating point support, Y.H. Park
Re: ucsimm flash, L�pez
Re: BINFMT_FLAT header problem....., lmc83
Re: how to build a correct user image?, Matthias Schoeldgen
Re: uClinux patches against 2.5.30, Greg Ungerer
Re: cannot execute...?, Sascha Smejkal
uClib for Hitachi SH family (sh-2), Fabio Giovagnini
Re: 2.4 kernel boot problem, Richard Klingler
Re: how to build a correct user image?, lmc83
2.4 kernel boot problem, thierry
how to build a correct user image?, lmc83
Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
Re: touble building uClinux dist (uclib and user stuff), David McCullough
Re: touble building uClinux dist (uclib and user stuff), Phil Wilshire

September 23, 2002

Re: touble building uClinux dist (uclib and user stuff), Thomas Chen
C++ problem with operator new, James McLaughlin
Re: [uClibc]How to implement boa 0.94.13, Uwe Beutin
Re: How to implement boa 0.94.13, Jon Nelson
How to implement boa 0.94.13, Uwe Beutin
Re: problem in building busybox, David McCullough
Re: problem building uclinux-dist, Thomas Chen
Re: ucsimm flash, Phil Wilshire
problem in building busybox, lmc83
Re: ucsimm flash, Richard Klingler
ucsimm flash, L�pez
Re: Strange M5249C3 problem .., Lars Segerlund
Re: problem building arm-elf toolchain, Frieder Ferlemann
Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
Re: arm-elf-xxx vs arm-linux-xxx, David McCullough

September 22, 2002

uClinux-2.5.38uc0 is out, Greg Ungerer
problem with big malloc(), Matthias Welwarsky

September 21, 2002

Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
Re: cannot execute...?, Uwe Beutin
Re: cannot execute...?, Greg Ungerer
Re: cannot execute...?, Matthias Schoeldgen
Re: PPPD, Greg Ungerer
Re: Strange M5249C3 problem .., Greg Ungerer
Re: inetd error, Greg Ungerer
Re: How can my kernel boot up automatically, MG-technik
Re: Re: How can my kernel boot up automatically, Richard Klingler
Re: cannot execute...?, Uwe Beutin
Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
Re: Re: How can my kernel boot up automatically, Thierry Zhong
RE: inetd error, #YEE FONG HUAT#
Re: touble building uClinux dist (uclib and user stuff), David McCullough
Re: problem building arm-elf toolchain, David McCullough

September 20, 2002

Re: pthreads, D. Peter Siddons
touble building uClinux dist (uclib and user stuff), Thomas Chen
Re: pthreads, Bernhard Kuhn
pthreads, D. Peter Siddons
Re: problem building arm-elf toolchain, Thomas Chen
Installation instructions for gdb & gdbserver on ARM7TDMI, Bernhard Kuhn
Strange M5249C3 problem .., Lars Segerlund
Re: problem building arm-elf toolchain, David McCullough
Re: Still a strange problem ... perhaps hardware .., Lars Segerlund
Re: Missing bits/ipc.h and sem.h AND Semaphore problems in uClinux 2.0.381pre7, Norman Shulman
uClinux-dist available from CVS, David McCullough
Re: arm-elf-xxx vs arm-linux-xxx, David McCullough
Re: question about kernel_thread, Greg Ungerer
Re: Still a strange problem ... perhaps hardware .., Greg Ungerer
Re: cannot execute...?, Greg Ungerer
Re: uClinux patches against 2.5.30, Greg Ungerer
Re: arm-elf-xxx vs arm-linux-xxx, Santosh Bhat
cannot execute...?, Uwe Beutin
Re: h8300-hitachi-hms vs h8300-unknown-coff, Fabio Giovagnini
Re: inetd error, Greg Ungerer
Re: How can my kernel boot up automatically, Richard Klingler
h8300-hitachi-hms vs h8300-unknown-coff, Alejandro Paz
Re: arm-elf-xxx vs arm-linux-xxx, David McCullough
How can my kernel boot up automatically, joky
Still a strange problem ... perhaps hardware .., Lars Segerlund
RE: inetd error, #YEE FONG HUAT#
arm-elf-xxx vs arm-linux-xxx, lmc83
question about kernel_thread, lmc83
Halt after mounting root fs ?, Lars Segerlund
Missing bits/ipc.h and sem.h AND Semaphore problems in uClinux 2.0.381pre7, Tan Chee Wei
C++ compile fails..., Ivan Ng
Re: mail list archive, vincent_kuo
Re: PPPD with PAP/CHAP and uClinux-2.4.x, Greg Ungerer
Re: XIP Questions, David McCullough

September 19, 2002

Re: How to verify that executable is using Shared lib, Benny Chen
Re: mail list archive, D. Peter Siddons
RE: mail list archive, Fabrice Gautier
RE: mail list archive, Juan Solsona
XIP Questions, Juan Solsona
mail list archive, D. Peter Siddons
Re: Still problems .., Lars Segerlund
lcd, Richard Klingler
Re: how to use a free function to free a space from malloc ?, Casey Jaymes
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
Re: problem building arm-elf toolchain, Thomas Chen
Re: ROMFS location problem-->kernel panic., Pushpa
Re: Keeping 'dist' in sync with CVS ..., Richard Klingler
Re: Still problems .., Heiko Degenhardt
Still problems .., Lars Segerlund
Re: Big app on uClinux, David McCullough
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Re: Some building problems ..., David McCullough
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
Some building problems ..., Lars Segerlund
IDE on Coldfire, Richard Klingler
Re: Re: Kernel panic: can't allocate root vfsmount, joky
Re: Serial EEPROM and uC5272, Sascha Smejkal
My work on uClinux-2.0.x for Hitachi Sh-2, Fabio Giovagnini
Re: PPPD with PAP/CHAP and uClinux-2.4.x, David Beamonte
Re: problem building arm-elf toolchain, David McCullough
Re: How to keep the user data?, 赵宏达
Re: problem building arm-elf toolchain, thomas chen
Re: Big app on uClinux, Changwoo Ryu
Re: Kernel panic: can't allocate root vfsmount, Greg Ungerer
Re: Request: brctl vtund, Greg Ungerer
Re: How to keep the user data?, joky
Re: Kernel panic: can't allocate root vfsmount, Thomas Chen
Re: How to keep the user data?, Kendrick Hamilton
How to keep the user data?, 赵宏达
Re: Re: Kernel panic: can't allocate root vfsmount, joky
Re: Re: Kernel panic: can't allocate root vfsmount, joky
Request: brctl vtund, CairnsNet Support
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer

September 18, 2002

RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
ide_get_lock(), Richard Klingler
Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
Re: How to port or make gdbserver for ARM7TDMI, Norman Shulman
Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
Re: Keeping 'dist' in sync with CVS ..., Erwin Authried
Re: ide harddrives under uclinux-2.4.x, Richard Klingler
how to use a free function to free a space from malloc ?, JINGSONG LIU
Re: Serial EEPROM and uC5272, Uwe Beutin
how to use a free function to free a space from malloc ?, JINGSONG LIU
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
Re: Kernel panic: can't allocate root vfsmount, Greg Ungerer
uClinux-2.5.36uc0 is up, Greg Ungerer
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Glib on uClinux-dist, Borracini Evandro-R45188
Re: AW: Flash read/write access on a uCdimm, Uwe Beutin
Re: How to verify that executable is using Shared lib, David McCullough
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Re: ide harddrives under uclinux-2.4.x, Frieder Ferlemann
ide harddrives under uclinux-2.4.x, Richard Klingler
Re: problem building arm-elf toolchain, David McCullough
Re: DMA device, Thomas Chen
Re: Big app on uClinux, David McCullough
Re: Serial EEPROM and uC5272, Sascha Smejkal
Re: compile problem?, David McCullough
How to verify that executable is using Shared lib, Benny Chen
Re: Kernel panic: can't allocate root vfsmount, Thomas Chen
Re: problem building arm-elf toolchain, Thomas Chen
Re: Keeping 'dist' in sync with CVS ..., Matthew Natalier
Re: Serial EEPROM and uC5272, Phil Wilshire
Question about what file system I should use, Y.H. Park
Kernel panic: can't allocate root vfsmount, joky
RE: Keeping 'dist' in sync with CVS ..., Menie, Georges
Big app on uClinux, Changwoo Ryu
Re: DMA device, Gillon Benoit
compile problem?, danny can
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
RE: DMA device, Shubhangi Jadhav
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
Serial EEPROM and uC5272, Sascha Smejkal
Re: problem building arm-elf toolchain, qmai
Re: Keeping 'dist' in sync with CVS ..., Heiko Degenhardt
Re: how to see the kernel boot message?, Heiko Degenhardt
small build problem ..., Lars Segerlund
DMA device, Gillon Benoit
Re: problem building arm-elf toolchain, David McCullough
problem building arm-elf toolchain, Thomas Chen
AW: Flash read/write access on a uCdimm, Juergen Mueller
(unknown), joky
(unknown), joky
Re: Keeping 'dist' in sync with CVS ..., Vadim Lebedev
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
Re: e2fsprogs, Greg Ungerer
Re: Keeping 'dist' in sync with CVS ..., David McCullough
Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
Re: Bad magic/ rev (16843008,need 2) error, Steven Merrifield

September 17, 2002

Re: g++, Matthew Natalier
Re: Bad magic/ rev (16843008,need 2) error, Kendrick Hamilton
Re: Bad magic/ rev (16843008,need 2) error, Eric Bosch
RE: How to port or make gdbserver for ARM7TDMI, Ho Lee
Re: how to see the kernel boot message?, Kendrick Hamilton
Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
Re: how to see the kernel boot message?, Thomas Chen
Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
how to see the kernel boot message?, zhongxin
Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
g++, Robert VanRooyen
Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
Re: Keeping 'dist' in sync with CVS ..., Jay Vaughan
e2fsprogs, Richard Klingler
Re: Keeping 'dist' in sync with CVS ..., Thomas Chen
Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
Re: PPPD with PAP/CHAP and uClinux-2.4.x, Greg Ungerer
Re: uCdimm and MTD support, Heiko Degenhardt
Re: Keeping 'dist' in sync with CVS ..., Greg Ungerer
RE: IPC, Robert Daniels
Re: Keeping 'dist' in sync with CVS ..., Phil Wilshire
RE: [uClinux-dev] ´ð¸´: [uClinux-dev] IPC & Interrupt, Robert Daniels
Re: IPC, Suresh Singh K.
Keeping 'dist' in sync with CVS ..., Jay Vaughan
PPPD with PAP/CHAP and uClinux-2.4.x, David Beamonte
Re: Flash read/write access on a uCdimm, Phil Wilshire
Re: arm7tdmi, Phil Wilshire
Re: [uClinux-dev] ´ð¸´: [uClinux-dev] IPC & Interrupt, Piotr Landowski
RE: Building on Cygwin, Banasik, Paul M
Re: IPC, Chee-Wei
Flash read/write access on a uCdimm, Uwe Beutin
Re: compilation error of ifattach, Thomas Chen
Re: compilation error of ifattach, Thomas Chen
gcc vs m68k-elf-gcc, danny can
Re: bintob howto?, Phil Wilshire
Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
´ð¸´: [uClinux-dev] IPC & Interrupt, Guifang Wu
Information on uClinux Course, sriram hariharan
`make distclean' leftovers, Miles Bader
Re: compilation error of ifattach, Erik Andersen
RE: Bad magic/ rev (16843008,need 2) error, Steven Merrifield
question about building /sbin/init, Thomas Chen
Re: Sleeping user process., Greg Ungerer
Re: Bad magic/ rev (16843008,need 2) error, David McCullough
Re: inetd error, Greg Ungerer
Re: RE: uClinux mkdep error, 20020714, David McCullough

September 16, 2002

Re: Interrupt vector initialization, Thomas Chen
Bad magic/ rev (16843008,need 2) error, Eric Bosch
Re: Interrupt vector initialization, Erwin Authried
uCdimm and MTD support, Uwe Beutin
Interrupt vector initialization, Vadim Lebedev
Re: How to port or make gdbserver for ARM7TDMI, Bernhard Kuhn
bintob howto?, Y.L. Leon
RE: RE: uClinux mkdep error, 20020714, Banasik, Paul M
compilation error of ifattach, Thomas Chen
RE:, Kendrick Hamilton
Re: gdb support for uCsimm, Uwe Beutin
Re: problem between bootstrap mode and normal mode, Jeff Dionne
Re: minix sheel problem, Jeff Dionne
RE:, Robert Daniels
uCdimm and MTD support, Uwe Beutin
pthreads Problem, Rajendra Kumar
Re: How to set the ldscript ??, Thomas Chen
Fw: How to set the ldscript ??, Santosh Bhat
inetd error, #YEE FONG HUAT#
Re: problems building elf2flt, Greg Ungerer
Re: RE: uClinux mkdep error, 20020714, David McCullough
Re: Why is the Bash not compiled ?, David McCullough
How to set the ldscript ??, Santosh Bhat
RE: uClinux mkdep error, 20020714, Banasik, Paul M
Re: arm7tdmi, Gillon Benoit
Re: arm7tdmi, Phil Wilshire
Re: minix sheel problem, Erwin Authried
(unknown), Guifang Wu
minix sheel problem, 이창수
Why is the Bash not compiled ?, 이창수
problems building elf2flt, Wolfgang Paulus
Re: arm7tdmi, Gillon Benoit
uClinux-2.5.35uc0, Greg Ungerer
BINFMT_FLAT header problem....., Thomas Chen
RE: problem with "gethwaddr() and SIOCADDRT(error)", Steven Merrifield
Re: problem with "gethwaddr() and SIOCADDRT(error)", vincent_kuo
RE: problem between bootstrap mode and normal mode, Steven Merrifield
what is the SIZE of the bFLT header???? 0x20 or 0x40???, Thomas Chen
Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park
problem with "gethwaddr() and SIOCADDRT(error)", lij01
problem between bootstrap mode and normal mode, lij01
bootmem allocation...., Thomas Chen
Re: problem with "kernel BUG at slab.c:994", David McCullough
Re: what is the purpose and meaning for the PAGE???, David McCullough
Re: page_alloc2 or page_alloc, David McCullough
Re: arm tool chain question (2.95.3), David McCullough
Re: stats of coldfire ether, Greg Ungerer

September 15, 2002

Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park

September 14, 2002

TEXTADDR and DRAM_BASE, thomas chen
TEXTADDR and DRAM_BASE.... what are their relationship?, Thomas Chen
problem with "kernel BUG at slab.c:994", Thomas Chen
Re: MAX_ORDER... why is it 13???, Thomas Chen
Re: How to port or make gdbserver for ARM7TDMI, Phil Wilshire
Re: How to port or make gdbserver for ARM7TDMI, Y.H. Park
gdb support for uCsimm, Binoj.G.S
Re: MAX_ORDER... why is it 13???, Carsten Neumann
i am getting error from page_alloc, Thomas Chen
MAX_ORDER... why is it 13???, Thomas Chen
what is the purpose and meaning for the PAGE???, Thomas Chen

September 13, 2002

page_alloc2 or page_alloc, Thomas Chen
Re: a very basic question, Phil Wilshire
a very basic question, Thomas Chen
RE: stats of coldfire ether, Robert Daniels
uClinus with NIBA, #YEE FONG HUAT#
Re: Any interested in a H8S port ?, plus notes on H8300H, Yoshinori Sato
arm tool chain question (2.95.3), Thomas Chen
Re: arm7tdmi, Thomas Chen
Re: Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
Re: arm7tdmi, Phil Wilshire
arm7tdmi, Gillon Benoit
Re: Sh2-elf compilation problem, Phil Wilshire
Re: gdbserver for uClinux arm?, Erwin Authried
Re: Sh2-elf compilation problem, Fabio Giovagnini
Re: Sleeping user process., David Braendler
Re: does uClinux support intel PXA250???, Robert Schwebel
About pthread on uclinux, Rajendra Kumar
Re: stats of coldfire ether, Richard Klingler
I wonder version of 'boa', 윤성환
Sh2-elf compilation problem, Anurag.R
Re: Sleeping user process., Greg Ungerer
Re: Sleeping user process., David Braendler
Re: any support of uClinux for intel PXA250, Greg Ungerer
Re: any support of uClinux for intel PXA250, Phil Wilshire
Re: any support of uClinux for intel PXA250, Thomas Chen
Re: ROM FS..., Thomas Chen
Re: Any interested in a H8S port ?, plus notes on H8300H, Yoshinori Sato
Re: Sleeping user process., Phil Wilshire
gdbserver for uClinux arm?, Bernhard Kuhn
Re: ROM FS..., Greg Ungerer
Re: stats of coldfire ether, Greg Ungerer
Re: any support of uClinux for intel PXA250, Greg Ungerer
Re: Sleeping user process., Carsten Neumann

September 12, 2002

Re: ROM FS..., David McCullough
RE: Sleeping user process., Rick Stevenson
RE: Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Fabrice Gautier
Re: Sleeping user process., pauli
Re: Any interested in a H8S port ?, plus notes on H8300H, Scott Howard
any support of uClinux for intel PXA250, thomas chen
RE: stats of coldfire ether, Richard Klingler
does uClinux support intel PXA250???, Thomas Chen
RE: stats of coldfire ether, Robert Daniels
Re: Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
Re: RTLinux insmod, Phil Wilshire
Re: Any interested in a H8S port ?, plus notes on H8300H, Fabio Giovagnini
Any interested in a H8S port ?, plus notes on H8300H, Alejandro Paz
Re: RTLinux insmod, Phil Wilshire
Re: ROM FS..., thomas chen
Re: ROM FS..., thomas chen
Re: Mixing C, C++ causes a linker error, David McCullough
Re: ROM FS..., Greg Ungerer
Re: Building 'just' user apps (no kernel, etc)., Greg Ungerer
Re: ROM FS..., David McCullough
Re: ROM FS..., Thomas Chen
Re: Building 'just' user apps (no kernel, etc)., David McCullough
Re: How to port or make gdbserver for ARM7TDMI, Greg Ungerer
Re: Cross-Compiling gcc-2.95.3, Phil Wilshire
RTLinux insmod, L�pez
Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Greg Ungerer
Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, David McCullough
ROM FS..., thomas chen
mcf_qspi driver for 2.4.x, Richard Klingler
RE: stats of coldfire ether, Richard Klingler
ds1302 patch for 2.4.x, Richard Klingler
Re: Building 'just' user apps (no kernel, etc)., Jay Vaughan
Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Miles Bader
Re: [uClinux-dev] Cross-Compiling gcc-2.95.3, Uwe Beutin
How to port or make gdbserver for ARM7TDMI, Y.H. Park
Sleeping user process., David Braendler
Re: Sleeping user process., Greg Ungerer
Re: ROMFS, Greg Ungerer
Re: C++ w/glibc, Ivan Ng
ROMFS, Thomas Chen
5407 bdm debug problem, Mark Abbate

September 11, 2002

RE: stats of coldfire ether, Richard Klingler
Re: bad_super_trap problem with uclinux 2.0.38 (newbie questions), Thomas Chen
RE: stats of coldfire ether, Richard Klingler
RE: stats of coldfire ether, Richard Klingler
Re: Building 'just' user apps (no kernel, etc)., David McCullough
Re: Building 'just' user apps (no kernel, etc)., Phil Wilshire
Re: Building 'just' user apps (no kernel, etc)., Greg Ungerer
RE: stats of coldfire ether, Robert Daniels
Building 'just' user apps (no kernel, etc)., Jay Vaughan
ds1302.c uClinux-2.4.x, Richard Klingler
Re: QSPI on mcf5272, Richard Klingler
Re: QSPI on mcf5272, Richard Klingler
Re: QSPI on mcf5272, Richard Klingler
IDE interface, marcobuffa
Cross-Compiling gcc-2.95.3, Uwe Beutin
Re: stats of coldfire ether, Greg Ungerer
Re: stats of coldfire ether, Richard Klingler
Re: Settings for 'standalone' compilation of user app, David Braendler
Re: sorry if this is a basic question... what is the frequeny of the system tick supposed to be?, David McCullough
Re: !!! How to send you my port !!!, David McCullough
Re: !!! How to send you my port !!!, Thomas Chen
sorry if this is a basic question... what is the frequeny of the system tick supposed to be?, Thomas Chen
Re: bad_super_trap problem with uclinux 2.0.38 (newbie questions), Thomas Chen
Re: the meaning of MAGIC_ROM_PTR ?, Mugavary
Re: the meaning of MAGIC_ROM_PTR ?, David McCullough
RE: Porting cs89x0 net device, Steven Merrifield
the meaning of MAGIC_ROM_PTR ?, Y.H. Park
Re: stats of coldfire ether, Greg Ungerer
Re: stats of coldfire ether, Greg Ungerer
Re: Settings for 'standalone' compilation of user app, David McCullough

September 10, 2002

bad_super_trap problem with uclinux 2.0.38 (newbie questions), SANSONI Benoit
RE: stats of coldfire ether, Robert Daniels
mcast on coldfire, Richard Klingler
Re: stats of coldfire ether, Richard Klingler
Re: stats of coldfire ether, Greg Ungerer
Re: QSPI on mcf5272, Greg Ungerer
Re: QSPI on mcf5272, mathias . fritzson
stats of coldfire ether, Richard Klingler
Settings for 'standalone' compilation of user app, David Braendler
RE: Porting cs89x0 net device, Menie, Georges
Re: QSPI on mcf5272, Richard Klingler
uClinux-2.5.34uc0 out now, Greg Ungerer
Porting cs89x0 net device, Aavan
Flash Dot, Casey Jaymes
Re: sharing irqs on 5206e, Greg Ungerer
Re: Simple "Hello World" on a M5272C3, Greg Ungerer
Re: !!! How to send you my port !!!, David McCullough

September 09, 2002

Simple "Hello World" on a M5272C3, Greg Robertson
Re: SNMPD & BOA MEMORY LEAK, Jim Treadway
bug in ARMulator, msr instruction, Thomas Eschenbacher
Re: !!! How to send you my port !!!, Fabio Giovagnini
Re: !!! How to send you my port !!!, Greg Ungerer
Re: Status of the tool cahin ?, Greg Ungerer
Status of the tool cahin ?, Lars Segerlund
Re: palm, David McCullough
RE: FTP Server, Banasik, Paul M
Re: Mixing C, C++ causes a linker error, Benny Chen
Re: !!! How to send you my port !!!, Fabio Giovagnini
Using RT-uClinux API 1.x: rt_get_time() and task synchronization, Tan Chee Wei
Re: !!! How to send you my port !!!, David McCullough
!!! How to send you my port !!!, Fabio Giovagnini
Re: cs89x0 issue, Robert Schwebel
Re: tracking down the TRANSITION to userland program, Matthias Welwarsky
cs89x0 issue, Aavan
FTP Server, Maoyi Fan
Re: tracking down the TRANSITION to userland program, Thomas Chen
Re: Yet another question... ZFLAT support, Greg Ungerer

September 08, 2002

Re: tracking down the TRANSITION to userland program, Matthias Welwarsky
tracking down the TRANSITION to userland program, Thomas Chen
Re: Yet another question... ZFLAT support, Thomas Chen
Re: Yet another question... ZFLAT support, Greg Ungerer
uclinux ioctls, v.nagasrinivas
Re: Mixing C, C++ causes a linker error, David McCullough
Re: BAD ADDRESS, Jeff Dionne
Re: Yet another question... ZFLAT support, Thomas Chen
Re: BAD ADDRESS, Thomas Chen
has anyone seen this uCLINUX 2.4.17 compilation ERROR, thomas chen
Re: Yet another question... ZFLAT support, Erik Andersen
Re: BAD ADDRESS, Jeff Dionne
QEUSTION ON ZFLAT, thomas chen
Re: Yet another question... ZFLAT support, Jeff Dionne
palm uClinux, kugan_v
Yet another question... ZFLAT support, Thomas Chen
BAD ADDRESS, Thomas Chen

September 07, 2002

RE: palm, Dan Trainor
palm, kugan_v
Re: Again IDE driver question., Greg Ungerer
Re: can it be.., Greg Ungerer
Re: question about genromFS, Greg Ungerer
Re: char driver question, Greg Ungerer
Again IDE driver question., Marcos Lois Bermúdez
ncurses, Richard Klingler
uClinux 2.4, Thomas Chen
can it be.., v.nagasrinivas

September 06, 2002

ANOTHER question about verify_area, Thomas Chen
question about genromFS, Thomas Chen
char driver question, Marcos Lois Bermúdez
Re: timezones, Erik Andersen
problem with toolchain, qmai
RE: Re: Using frank_app in RT-patched uClinux, Tan Chee Wei
Re: Fwd: [ARMboot-users] missing symbols in GDB, Rolf Peukert
Re: timezones, Richard Klingler
Fwd: [ARMboot-users] missing symbols in GDB, Stephan Linz
Re: IPC problem, Greg Ungerer
Re: IDE driver, Greg Ungerer
Re: where is sys_setup being called for ARM version of uclinux?, Greg Ungerer
Re: some newbie questions about porting, Greg Ungerer
Re: FTP Client, Greg Ungerer

September 05, 2002

Re: timezones, Erik Andersen
Re: timezones, Carsten Neumann
environment settings, Richard Klingler
FTP Client, Shankar Rajendran
Re: timezones, Richard Klingler
Re: usart B on ARM7TDMI, Vadim Lebedev
timezones, Richard Klingler
IDE driver, Marcos Lois Bermúdez
Re: stupid question, Richard Klingler
usart B on ARM7TDMI, Dudi Feuer
Re: stupid question, Markus Pietrek
stupid question, Richard Klingler
Re: QSPI on mcf5272, Greg Ungerer
Re: QSPI on mcf5272, Greg Ungerer
Re: ds1302 driver for 2.4.x, Richard Klingler
Re: QSPI on mcf5272, Ron Fial
Re: QSPI on mcf5272, Ron Fial
Re: arm-toolchain v.s. uClibc version, Erik Andersen
gdbserver is not supported on ARM?, 윤성환
Re: some newbie questions about porting, qmai
Re: ds1302 driver for 2.4.x, Greg Ungerer
arm-toolchain v.s. uClibc version, kj_lin
ds1302 driver for 2.4.x, Richard Klingler
Re: QSPI on mcf5272, Richard Klingler
Re: QSPI on mcf5272, Greg Ungerer
Re: QSPI on mcf5272, Ron Fial
Re: Mixing C, C++ causes a linker error, Benny Chen
Re: Module Loading Problem - Simple Hello World Module..., Brian
Re: QSPI on mcf5272, Greg Ungerer

September 04, 2002

Re: QSPI on mcf5272, Richard Klingler
Re: [Documentaion] M5272C3 pthreads howto, Erik Andersen
Re: QSPI on mcf5272, Ron Fial
Re: coldfire fec.c ethernet driver, Richard Klingler
Re: [Documentaion] M5272C3 pthreads howto, Bernhard Kuhn
unable to expand ramfs.img, Shankar Rajendran
Re: Module Loading Problem - Simple Hello World Module..., Greg Ungerer
Re: coldfire fec.c ethernet driver, Greg Ungerer
RE: [Documentaion] M5272C3 pthreads howto, David Chan
coldfire fec.c ethernet driver, Richard Klingler
CAS for pthreads, Bernhard Kuhn
Re: Mixing C, C++ causes a linker error, Kendrick Hamilton
Re: About /proc/cpuinfo, Greg Ungerer
Re: booting from flash works (o;, Greg Ungerer
Re: some newbie questions about porting, Greg Ungerer
Please IGNORE this mail, Rajendra Kumar
Something wrong with printbenv, Piotr Landowski
some newbie questions about porting, qmai
Compile UClinux on Redhat 7.3, Hamid Reza Akbari
test, Piotr Landowski
test, Piotr Landowski
Re: Module Loading Problem - Simple Hello World Module..., Brian
booting from flash works (o;, Richard Klingler
About /proc/cpuinfo, Marcos Lois Bermúdez
Re: IPC problem, Greg Ungerer
Re: Module Loading Problem - Simple Hello World Module..., Greg Ungerer
Re: really close to boot from flash, Richard Klingler
Module Loading Problem - Simple Hello World Module..., Brian
Re: How to use NAT, vincent_kuo
Mixing C, C++ causes a linker error, Alex Busteed
Test, Hamid Reza Akbari
uClinux on a SWL3300AP Access poiont - interesting one, Adilson Oliveira
How to use NAT, 이창수
Re: Q : Shared/dynamic loading librairies, vincent_kuo
m68k-tools on PowerPC, Ken Treis
Re: no multicast with coldfire..., Richard Klingler
Re: [Documentaion] M5272C3 pthreads howto, Bernhard Kuhn
Re: really close to boot from flash, Greg Ungerer
Re: Installation instructions for uClinux-2.4.19-uc0on M5272C3, Bernhard Kuhn
Re: [Documentaion] M5272C3 pthreads howto, David McCullough

September 03, 2002

Re: ide for mcf5272, Matthew Natalier
Re: really close to boot from flash, Jeff Carr
really close to boot from flash, Richard Klingler
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Jeff Carr
RE: [Documentaion] M5272C3 pthreads howto, David Chan
Re: can't allocate root vfsmount, Richard Klingler
Externel bus interface.., Shankar Rajendran
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Erwin Authried
ide for mcf5272, Richard Klingler
can't allocate root vfsmount, Richard Klingler
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Greg Ungerer
Re: QSPI on mcf5272, Mark Yeck
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
uClinux-2.4.19-uc1 available, David McCullough
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Bernhard Kuhn
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
Re: Installation instructions for uClinux-2.4.19-uc0 on M5272C3, David McCullough
doubts about flash, fbertasso
Installation instructions for uClinux-2.4.19-uc0 on M5272C3, Bernhard Kuhn
Re: Add a new platform to uClinux-dist, Richard Klingler
Add a new platform to uClinux-dist, Davide Ballestrero
Re: Using FAT file system, mathias . fritzson
Test, Hamid Reza Akbari
[Documentaion] M5272C3 pthreads howto, Bernhard Kuhn

September 02, 2002

Re: Ssh & users, Matthew Natalier
Re: Using FAT file system, David McCullough
Ssh & users, Kurt
QSPI on mcf5272, Richard Klingler
Re: Using frank_app in RT-patched uClinux, Phil Wilshire
Using FAT file system, mathias . fritzson
(unknown), Hamid Reza Akbari
Re: Memory management question, David McCullough
Memory management question, Peter Ogilvy
Where to place driver include files, Peter Ogilvy
Re: Q : Shared/dynamic loading librairies, vincent_kuo
Re: problem using gdbserver with ucsimm, rafa lopez
Re: stable uClibc for uClinux-2.4.17/armnommu, David McCullough
multicast running now on fec 5272, Richard Klingler
Using frank_app in RT-patched uClinux, Tan Chee Wei
Re: problem using gdbserver with ucsimm, Francis Rastrilla Agud
stable uClibc for uClinux-2.4.17/armnommu, Markus Pietrek
Digest of the list?, Christian Hack
Re: Q : Shared/dynamic loading librairies, vincent_kuo
compile error in PPPOE, Y.H. Park
Re: unable to expand the ramfs.img, Greg Ungerer
Re: Problem with elf2flt, Greg Ungerer

September 01, 2002

Re: Q : Shared/dynamic loading librairies, pauli
unable to expand the ramfs.img, Shankar Rajendran
Re: ROMFS location problem-->kernel panic., Shankar Rajendran
uClinux-2.5.33uc0, Greg Ungerer
Re: ROMFS location problem-->kernel panic., Jeff Dionne
Re: Q : Shared/dynamic loading librairies, David McCullough
Re: Q : Shared/dynamic loading librairies, DALLEMAGNE Philippe
802.11, Naprstek Jiri-R54332
RE: ROMFS location problem-->kernel panic., Ilan Pollak
RE: Arm AXD Debugger, Ilan Pollak
SNMPD & BOA MEMORY LEAK, Erdem Gunes
Re: Unknown error 14 on AT91, Erwin Authried
Re: Unknown error 14 on AT91, Thomas Eschenbacher

News | FAQ | advertise