uclinux.devel (thread)

gdbserver server compiling problem, Stella
FLAT binary, C++, problem with relocation outside of program, Matthias Welwarsky
- Re: FLAT binary, C++, problem with relocation outside of program, Erik Andersen
  - Re: FLAT binary, C++, problem with relocation outside of program, Matthias Welwarsky
Jffs2 , trueffs , MTD and blockmem, Jean-Francois Mailloux
- Re: Jffs2 , trueffs , MTD and blockmem, Phil Wilshire
Has uClinux-2.4.x been ported to the AT75C220?, Brian Godette
- Re: Has uClinux-2.4.x been ported to the AT75C220?, Erik Andersen
- Re: Has uClinux-2.4.x been ported to the AT75C220?, Erwin Authried
- Re: Has uClinux-2.4.x been ported to the AT75C220?, Bernhard Kuhn
Useful link, Shankar Rajendran
CPU32 enable/disable interrupts, mathias . fritzson
Support for the MC68336/MC68376, mathias . fritzson
head.S, head-arm-*arch*.S ..., Li
- Re: head.S, head-arm-*arch*.S ..., Matthias Welwarsky
Re: [Announcement] PPCboot for Coldfire, Alex Heinrich
- Re: [Announcement] PPCboot for Coldfire, Bernhard Kuhn
Unable to open an initial console, Cihan Esen
- Re: Unable to open an initial console, Uwe Beutin
  - Re: Unable to open an initial console, Cihan Esen
    - Re: Unable to open an initial console, Uwe Beutin
- RE: Unable to open an initial console, Fabrice Gautier
  - RE: Unable to open an initial console, Cihan Esen
    - RE: Unable to open an initial console, Uwe Beutin
romfs - one more step, Ilan Pollak
- Re: romfs - one more step, Shankar Rajendran
  - Re: romfs - one more step, Venkatesh M R
    - Re: romfs - one more step, Shankar Rajendran
- Re: romfs - one more step, David McCullough
  - Re: romfs - one more step, Ilan Pollak
    - Re: romfs - one more step, David McCullough
- Needs Information, Shankar Rajendran
  - Re: Needs Information, Phil Wilshire
    - Re: Needs Information, Shankar Rajendran
    - Re: Needs Information, Phil Wilshire
- RE: romfs - one more step, Steven Merrifield
  - Re: romfs - one more step, Shankar Rajendran
- Re: romfs - one more step, V Kugan
- Re: romfs - one more step, Marshall M. Midden
head.S, Li
Compile error in building uClinux-dist-20020701.tar.gz, Y.H. Park
- Re: Compile error in building uClinux-dist-20020701.tar.gz, Greg Ungerer
About ucLinux2.4.x, Rajendra Rajguru
- Re: About ucLinux2.4.x, Uwe Beutin
  - Re: About ucLinux2.4.x, David McCullough
RE: Whats wrong? (Booting on EB40 with extra memory )., Fabrice Gautier
Whats wrong? (Booting on EB40 with extra memory)., Stefan Jonsson
IRC channel, Uwe Beutin
- Re: IRC channel, Carlos Manuel Duclos Vergara
  - Re: IRC channel, Uwe Beutin
- RE: IRC channel, Fabrice Gautier
  - RE: IRC channel, Uwe Beutin
does romfs/dev directory have to look like that?, Ilan Pollak
- Re: does romfs/dev directory have to look like that?, Uwe Beutin
- Re: does romfs/dev directory have to look like that?, Phil Wilshire
uClinux patches againts 2.5.29, gerg
Howto to synchronize printks and printfs, Fabrice Gautier
- Re: Howto to synchronize printks and printfs, Carsten Neumann
- Re: Howto to synchronize printks and printfs, D. Jeff Dionne
- RE: Howto to synchronize printks and printfs, Fabrice Gautier
Kernel compile error, Y.H. Park
- Re: Kernel compile error, gerg
  - Re: Kernel compile error, Y.H. Park
    - Re: Kernel compile error, gerg
Somewhat OT: Flash memory questions, Karl Morant
- Re: Somewhat OT: Flash memory questions, Henrik Craubner
  - Re: Somewhat OT: Flash memory questions, Karl Morant
uCdimm and uClinux-dist-20020701, Uwe Beutin
gdb with Multiprocessors...which running uCLinux, How?, v.nagasrinivas
uClinux patches against 2.5.28, Greg Ungerer
- Somewhat OT: Flash memory questions, Karl Morant
  - Re: Somewhat OT: Flash memory questions, Greg Ungerer
    - Re: Somewhat OT: Flash memory questions, Karl Morant
    - Getting Postings twice (was: Somewhat OT: Flash memory questions), Tobias Otto-Adamczak
    - Re: Getting Postings twice (was: Somewhat OT: Flash memory questions), David McCullough
Re: Loading RT-Linux on uCSIMM after re-program & Kuhn, Tan Chee-Wei
- RTAI for Dragonball (was Re: Re: Loading RT-Linux on uCSIMM after re-program & Kuhn), Bernhard Kuhn
  - Re: RTAI for Dragonball (was Re: Re: Loading RT-Linux on uCSIMM after re-program & Kuhn), The LEOX team
    - Re: RTAI for Dragonball (and Coldfire 5272), Peter Ogilvy
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Greg Ungerer
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Phil Wilshire
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Bernhard Kuhn
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), gerg
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Bernhard Kuhn
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Greg Ungerer
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), gerg
    - Re: Re: RTAI for Dragonball (and Coldfire 5272), Peter Ogilvy
    - Re: RTAI for Dragonball (and Coldfire 5272), The LEOX team
    - Re: RTAI for Dragonball (and Coldfire 5272), Peter Ogilvy
    - Task Scheduling, Guifang Wu
    - Re: Task Scheduling, Phil Wilshire
    - Task Scheduling, Guifang Wu
    - Re: RTAI for Dragonball (and Coldfire 5272), Greg Ungerer
    - Re: RTAI for Dragonball (and Coldfire 5272), Yosh K
    - Real Time options for uClinux (was Re: Re: RTAI for Dragonball (and Coldfire 5272)), Bernhard Kuhn
  - Re: RTAI for Dragonball (was Re: Re: Loading RT-Linux on uCSIMM after re-program & Kuhn), Phil Wilshire
  - Re: RTAI for Dragonball (was Re: Re: Loading RT-Linux on uCSIMM after re-program & Kuhn), Phil Wilshire
- RTAI for Dragonball (was Re: Re: Loading RT-Linux on uCSIMM after re-program & Kuhn), Bernhard Kuhn
Re: [uCsimm] notice to the list, Uwe Beutin
[Fwd: Fw: help needed after using expand ramfs], Md Javeed Ahmed
idle task killed :-(, Carlos Manuel Duclos Vergara
- Re: idle task killed :-(, Greg Ungerer
  - Re: idle task killed :-(, Carlos Manuel Duclos Vergara
    - Re: idle task killed :-(, Greg Ungerer
    - Re: idle task killed :-(, Greg Ungerer
JEENI and ucLinux tool chain GDB, MikeTrest (At Office)
ARM external IRQ, vincent_kuo
- Re: ARM external IRQ, Phil Wilshire
- Re: ARM external IRQ, Matthias Welwarsky
  - Re: ARM external IRQ, Erwin Authried
  - Re: ARM external IRQ, Erwin Authried
- Re: ARM external IRQ, vincent_kuo
  - Kuhn, Lars Segerlund
- Re: ARM external IRQ, vincent_kuo
RE: XIP description Document, Steven Merrifield
- Re: XIP description Document, Phil Wilshire
- RE: XIP description Document, Steven Merrifield
RE: MCF5272 board "boot strategy and runtime flash write operation", Steven Merrifield
Resources available to new users?, Paul, Larry W.
- Re: Resources available to new users?, Phil Wilshire
bootmem - which way ?, Ilan Pollak
- Re: bootmem - which way ?, David McCullough
  - XIP description Document, Phil Wilshire
  - Re: bootmem - which way ?, Ilan Pollak
    - Re: bootmem - which way ?, David McCullough
- Re: bootmem - which way ?, David McCullough
- RE: bootmem - which way ?, Fabrice Gautier
romfs just won't start for me :-(, Ilan Pollak
- Re: romfs just won't start for me :-(, Greg Ungerer
  - Re: romfs just won't start for me :-(, Ilan Pollak
    - Re: romfs just won't start for me :-(, David McCullough
    - Re: romfs just won't start for me :-(, gerg
    - Re: romfs just won't start for me :-(, Mark McChrystal
    - Re: romfs just won't start for me :-(, Uwe Beutin
    - Re: romfs just won't start for me :-(, Ilan Pollak
    - Re: romfs just won't start for me :-(, David McCullough
  - Re: romfs just won't start for me :-(, Matthias Welwarsky
    - Re: romfs just won't start for me :-(, Ilan Pollak
    - Re: romfs just won't start for me :-(, David McCullough
    - Re: romfs just won't start for me :-(, Matthias Welwarsky
using kmalloc2 in 2.4.10 kernel, Subash Kalbarga
- Re: using kmalloc2 in 2.4.10 kernel, David McCullough
Newbie question about mcfserial.c and scheduling, Francesc Borrell Ros
- Re: Newbie question about mcfserial.c and scheduling, gerg
- Re: Newbie question about mcfserial.c and scheduling, gerg
- Re:Newbie question about mcfserial.c and scheduling, Francesc Borrell Ros
  - Re: Newbie question about mcfserial.c and scheduling, Matthias Schoeldgen
    - Re: Newbie question about mcfserial.c and scheduling, Francesc Borrell Ros
    - Re: Newbie question about mcfserial.c and scheduling, Matthias Schoeldgen
    - Re: Newbie question about mcfserial.c and scheduling, Francesc Borrell Ros
    - Re: Newbie question about mcfserial.c and scheduling, Matthias Schoeldgen
  - Re: Newbie question about mcfserial.c and scheduling, Greg Ungerer
MCF5272 board "boot strategy and runtime flash write operation", Alex Heinrich
- Re: MCF5272 board "boot strategy and runtime flash write operation", Heiko Degenhardt
  - Re: MCF5272 board "boot strategy and runtime flash write operation", Uwe Beutin
Problems with uClibc and 2.0 kernel, mathias . fritzson
- Re: Problems with uClibc and 2.0 kernel, David McCullough
- Re: Problems with uClibc and 2.0 kernel, mathias . fritzson
  - Re: Problems with uClibc and 2.0 kernel, David McCullough
    - Re: Problems with uClibc and 2.0 kernel, Erik Andersen
About boa,cgi and uClibc., Lycourgos Papageorgiou
- Re: About boa,cgi and uClibc., Phil Wilshire
- Re: About boa,cgi and uClibc., VAN DUC UY
- Re: About boa,cgi and uClibc., David McCullough
  - m68k-elf-tools build, Mark McChrystal
    - Re: m68k-elf-tools build, gerg
    - Re: m68k-elf-tools build, David McCullough
  - Romfs, Mark McChrystal
  - Re: About boa,cgi and uClibc., Lycourgos Papageorgiou
- Re: About boa,cgi and uClibc., VAN DUC UY
- RE: About boa,cgi and uClibc., Chris Alfred
- RE: About boa,cgi and uClibc., Steven Merrifield
- RE: About boa,cgi and uClibc., Chris Alfred
  - Re: About boa,cgi and uClibc., Erik Andersen
    - Re: About boa,cgi and uClibc., Lycourgus Papageorgiou
    - Re: About boa,cgi and uClibc., Erik Andersen
- About boa,cgi and uClibc., Lycourgos Papageorgiou
- RE: About boa,cgi and uClibc., Chris Alfred
Loading RT-Linux on uCSIMM after re-program, Tan Chee Wei
- Re: Loading RT-Linux on uCSIMM after re-program, Phil Wilshire
- RE: Loading RT-Linux on uCSIMM after re-program, Tan Chee Wei
- Loading RT-Linux on uCSIMM after re-program, Tan Chee Wei
- RE: Loading RT-Linux on uCSIMM after re-program, Tan Chee Wei
question about MTD driver, Y.H. Park
- Re: question about MTD driver, Erwin Authried
  - Re: question about MTD driver, Y.H. Park
    - Re: question about MTD driver, Erwin Authried
- question about MTD driver, Y.H. Park
About ucSimm BootLoader, Rajendra Rajguru
- Re: About ucSimm BootLoader, Uwe Beutin
Any body tried .. cross tools chain building for SH arch.., v.nagasrinivas
- Re: Any body tried .. cross tools chain building for SH arch.., Ken Tanaka
- Re: Any body tried .. cross tools chain building for SH arch.., Greg Ungerer
- Re: Any body tried .. cross tools chain building for SH arch.., Fabio Giovagnini
- Any body tried .. cross tools chain building for SH arch.., v.nagasrinivas
- Any body tried .. cross tools chain building for SH arch.., v.nagasrinivas
latest 2.5.27 patches up, Greg Ungerer
Reply: [uClinux-dev] arm reference manual, wacent01
Problem with shell image, Venkatesh M R
- Re: Problem with shell image, Phil Wilshire
again, Carlos Manuel Duclos Vergara
- Re: again, Phil Wilshire
  - Re: again, Carlos Manuel Duclos Vergara
    - Re: again, Phil Wilshire
    - Re: again, Carlos Manuel Duclos Vergara
    - Re: again, Phil Wilshire
    - about m68k PIC compiler, sanit
    - Re: again, Matthias Welwarsky
    - Re: again, Matthias Welwarsky
arm reference manual, Li
- Re: arm reference manual, v.nagasrinivas
- Re: arm reference manual, v.nagasrinivas
- RE: arm reference manual, Preethi
- arm reference manual, Li
RE: munmap of non-mapped memory by process, Fabrice Gautier
Shared libraries for arm, Fabrice Gautier
- Re: Shared libraries for arm, pauli
  - Re: Shared libraries for arm, pauli
  - Re: Shared libraries for arm, pauli
- RE: Shared libraries for arm, Fabrice Gautier
  - Re: Shared libraries for arm, pauli
  - Re: Shared libraries for arm, Greg Ungerer
  - Re: Shared libraries for arm, David McCullough
- RE: Shared libraries for arm, Fabrice Gautier
another compilation issue, Carlos Manuel Duclos Vergara
- Re: another compilation issue, Phil Wilshire
Memory usage calculation, mathias . fritzson
asm/mcfwdebug.h, Kendrick Hamilton
- Re: asm/mcfwdebug.h, gerg
Passwd and crypt, Uwe Beutin
- Re: Passwd and crypt, Phil Wilshire
  - Re: Passwd and crypt, Uwe Beutin
    - Re: Passwd and crypt, Phil Wilshire
    - Re: Passwd and crypt, Steven Bade
    - Re: Passwd and crypt, Phil Wilshire
    - Re: Passwd and crypt, Matthias Schoeldgen
    - Re: Passwd and crypt, Uwe Beutin
    - Re: Passwd and crypt, Uwe Beutin
    - Re: Passwd and crypt, Uwe Beutin
    - Re: Passwd and crypt, Uwe Beutin
- Re: Passwd and crypt, Steven Bade
About including asm code into C source, Marcos Lois Bermúdez
- Re: About including asm code into C source, Cihan Esen
  - uCDimm vendor.conmfig for shared libs, Phil Wilshire
    - Re: uCDimm vendor.conmfig for shared libs, David McCullough
- Re: About including asm code into C source, Phil Wilshire
  - Re: About including asm code into C source, The LEOX team
  - Re: About including asm code into C source, The LEOX team
Yet another question, Steven Bade
Starting SH2 uClinux porting on SH2 7044, Fabio Giovagnini
RE: Really Braindead question ( I think not PW), Steven Merrifield
uCdimm passwd, Phil Wilshire
- Re: uCdimm passwd, Steven Bade
  - Re: uCdimm passwd, Phil Wilshire
    - Re: uCdimm passwd, Steven Bade
    - Re: uCdimm passwd, Steven Bade
- Re: uCdimm passwd, Uwe Beutin
Re: RE: Coldfire, ISDN and codecs, Ron Fial
when executing build-uclinux-tools.sh.., Y.H. Park
- Re: when executing build-uclinux-tools.sh.., Thomas Eschenbacher
  - Re: when executing build-uclinux-tools.sh.., Y.H. Park
    - Re: when executing build-uclinux-tools.sh.., Thomas Eschenbacher
    - Re: when executing build-uclinux-tools.sh.., Y.H. Park
    - Re: when executing build-uclinux-tools.sh.., Thomas Eschenbacher
    - Re: when executing build-uclinux-tools.sh.., Y.H. Park
    - Re: when executing build-uclinux-tools.sh.., Y.H. Park
    - Re: when executing build-uclinux-tools.sh.., Uwe Beutin
    - Re: when executing build-uclinux-tools.sh.., Y.H. Park
    - Re: when executing build-uclinux-tools.sh.., Y.H. Park
Really Braindead question, Steven Bade
- Re: Really Braindead question, Phil Wilshire
- Re: Really Braindead question, Uwe Beutin
  - Re: Really Braindead question, Phil Wilshire
  - Re: Really Braindead question, David McCullough
    - Re: Really Braindead question, Steven Bade
    - Re: Really Braindead question ( I think not PW), Phil Wilshire
    - Re: Really Braindead question ( I think not PW), Phil Wilshire
    - Re: Really Braindead question ( I think not PW), Erik Andersen
    - Re: Really Braindead question ( I think not PW), Phil Wilshire
    - Re: Really Braindead question ( I think not PW), Erik Andersen
    - Re: Really Braindead question ( I think not PW), Phil Wilshire
    - Re: Really Braindead question, David McCullough
    - Re: Really Braindead question, Erik Andersen
    - Re: Really Braindead question, Steven Bade
is me?, Carlos Manuel Duclos Vergara
- Re: is me?, Greg Ungerer
- Re: is me?, Greg Ungerer
MacOSX, Carlos Manuel Duclos Vergara
- Re: MacOSX, Matthias Schoeldgen
  - Re: MacOSX, David Snowdon
    - Re: MacOSX, Carlos Manuel Duclos Vergara
    - Re: MacOSX, Matthias Schoeldgen
    - Re: MacOSX, Matthias Schoeldgen
AT91 and USB, Mark Barton
- Re: AT91 and USB, gerg
- AT91 and USB, Mark Barton
how to use read and write to access ram of MCF5272 ?uclinux-dev@u clinux.org, JINGSONG LIU
- how to use read and write to access ram of MCF5272 ?uclinux-dev@u clinux.org, JINGSONG LIU
Problem with extended signaling (siginfo_t) on Coldfire 5307, Jan Mussel
- #ifdefs in arch/m68knommu/platform/5307/signal.c, Jan Mussel
  - Re: #ifdefs in arch/m68knommu/platform/5307/signal.c, David McCullough
    - Re: #ifdefs in arch/m68knommu/platform/5307/signal.c, Jan Mussel
    - Re: #ifdefs in arch/m68knommu/platform/5307/signal.c, David McCullough
tool chain ... problems., Lars Segerlund
- Re: tool chain ... problems., Phil Wilshire
shared libraries, Juergen Mueller
- Re: shared libraries, David McCullough
  - AW: shared libraries, Juergen Mueller
uCLinux and Cobra5272 evalboard, Alex Heinrich
- Re: uCLinux and Cobra5272 evalboard, Heiko Degenhardt
- Re: uCLinux and Cobra5272 evalboard, Henrik Craubner
- Re: uCLinux and Cobra5272 evalboard, Heiko Degenhardt
uClinux and ynchronous I/O, Ron Fial
Please Help, Preethi
- Re: Please Help, v.nagasrinivas
Regarding The Boot + Ramdisk, Venkatesh M R
- Re: Regarding The Boot + Ramdisk, somshekar kadam
  - Re: Regarding The Boot + Ramdisk, Venkatesh M R
sash question, Maciej Szlapka
- Re: sash question, David McCullough
- Re: sash question, Matthew Natalier
RE: Is Cygwin Supported?, Banasik, Paul M
- RE: Is Cygwin Supported?, John Passaniti
- RE: Is Cygwin Supported?, Banasik, Paul M
  - RE: Is Cygwin Supported?, John Passaniti
- RE: Is Cygwin Supported?, Banasik, Paul M
  - RE: Is Cygwin Supported?, John Passaniti
NTPClient can not run properly on MIPS, Van Duc Uy
- Re: NTPClient can not run properly on MIPS, David McCullough
- NTPClient can not run properly on MIPS, Van Duc Uy
pages on an MMUless CPU ?, Ilan Pollak
- Re: pages on an MMUless CPU ?, David McCullough
  - Re: pages on an MMUless CPU ?, Ilan Pollak
    - Re: pages on an MMUless CPU ?, David McCullough
- Re: pages on an MMUless CPU ?, Phil Wilshire
  - Open thanks to Phil Wiltshire, SDCS, and Arcturus., Iain Galloway
- Re: pages on an MMUless CPU ?, Phil Wilshire
- pages on an MMUless CPU ?, Ilan Pollak
- pages on an MMUless CPU ?, Ilan Pollak
uClinux patchs for 2.5.26, Greg Ungerer
a strange problem, wang rui
how to use read and write to access ram of MCF5272 ?, JINGSONG LIU
- how to use read and write to access ram of MCF5272 ?, JINGSONG LIU
RE: MCF5272 and Ethernet, Jean-Francois Mailloux
- AW: MCF5272 and Ethernet, Juergen Mueller
  - RE: MCF5272 and Ethernet, Jean-Francois Mailloux
    - Re: MCF5272 and Ethernet, Erdem Gunes
    - RE: MCF5272 and Ethernet, Jean-Francois Mailloux
    - Re: MCF5272 and Ethernet, Erdem Gunes
    - Re: MCF5272 and Ethernet, Erdem Gunes
Using long long, Mark Barton
- Re: Using long long, David McCullough
  - RE: Using long long, Mark Barton
    - Re: Using long long, David McCullough
"make" problems for dsc21, Li
- Re: "make" problems for dsc21, Greg Ungerer
  - Re: "make" problems for dsc21, Matthias Welwarsky
    - Re: "make" problems for dsc21, Greg Ungerer
    - Re: "make" problems for dsc21, Matthias Welwarsky
Writing interrupt routines, Cihan Esen
- Re: Writing interrupt routines, Phil Wilshire
  - Re: Writing interrupt routines, Cihan Esen
    - Re: Writing interrupt routines, Phil Wilshire
    - Re: Writing interrupt routines, Kendrick Hamilton
    - Re: Writing interrupt routines, Phil Wilshire
    - Re: Writing interrupt routines, Greg Ungerer
- Comparison between goahead and apache, mawali
  - Re: Comparison between goahead and apache, The LEOX team
  - RE: Comparison between goahead and apache, John Passaniti
- Re: Writing interrupt routines, Phil Wilshire
- Writing interrupt routines, Cihan Esen
Where can i find documents or information about XIP, YoungHoon Park
- Re: Where can i find documents or information about XIP, Greg Ungerer
  - Re: Where can i find documents or information about XIP, YoungHoon Park
    - Re: Where can i find documents or information about XIP, Greg Ungerer
    - Re: Where can i find documents or information aboutXIP, Erwin Authried
    - new processor question, somshekar kadam
    - hi, somshekar kadam
    - ramdisk, somshekar kadam
    - Is Cygwin Supported?, John Passaniti
    - Re: Is Cygwin Supported?, Mark McChrystal
    - Re: ramdisk, Carsten Neumann
    - Re: ramdisk, somshekar kadam
    - Re: ramdisk, Phil Wilshire
    - Re: ramdisk, Venkatesh M R
    - Re: ramdisk, somshekar kadam
    - ramdisk question ???, somshekar kadam
    - Re: ramdisk question ???, v.nagasrinivas
    - Re: hi, Praveen
    - ramdisk, somshekar kadam
    - ramdisk, somshekar kadam
    - Re: Where can i find documents or information aboutXIP, YoungHoon Park
    - Re: Where can i find documents or information aboutXIP, Erwin Authried
    - Re: Where can i find documents or information aboutXIP, Rolf Peukert
    - Re: Where can i find documents or information aboutXIP, Phil Wilshire
    - Coldfire, ISDN and codecs, Iain Galloway
    - RE: Coldfire, ISDN and codecs, Iain Galloway
    - Re: RE: Coldfire, ISDN and codecs, Greg Ungerer
    - RE: RE: Coldfire, ISDN and codecs, PLIC interface and GCI, Iain Galloway
    - Re: RE: Coldfire, ISDN and codecs, PLIC interface and GCI, Greg Ungerer
    - Re: Where can i find documents or information aboutXIP, Erwin Authried
    - Re: Where can i find documents or information aboutXIP, Erwin Authried
    - Re: Where can i find documents or information aboutXIP, gerg
Re: Login instability, and how to register the mounting, mathias . fritzson
- Re: Login instability, and how to register the mounting, Kendrick Hamilton
- Re: Login instability, and how to register the mounting, mathias . fritzson
romfs image help, Ilan Pollak
- Re: romfs image help, Phil Wilshire
Wilson Chan/TOSHIBA_TAEC is out of the office., Wilson . Chan
boa, Cihan Esen
- Re: boa, Ico Doornekamp
  - Re: boa, Cihan Esen
    - Re: boa, Phil Wilshire
    - Re: boa, Erdem Gunes
How to get a bootloader ?, Pu-Sik Park
Junk Character in VGA, Shankar Rajendran
- Re: Junk Character in VGA, Matthias Schoeldgen
  - Re: Junk Character in VGA, Shankar Rajendran
anyone successful driven the irda under uclinux?, tong changda
RE: Latest release of elf2flt ? (RE: elf2flt questi on), Fabrice Gautier
ARM binary tools, Li
- Re: ARM binary tools, gerg
  - Re: ARM binary tools, Li
    - Re: ARM binary tools, Greg Ungerer
does swapping is supported in uClinux., YoungHoon Park
- Re: does swapping is supported in uClinux., Phil Wilshire
- Re: does swapping is supported in uClinux., V Kugan
Using pthread causes a compiler error on a __THROW statement., Paul, Larry W.
patch from uClinux dist 20020613 to 20020701, Bernhard Kuhn
- Re: patch from uClinux dist 20020613 to 20020701, Phil Wilshire
- RE: patch from uClinux dist 20020613 to 20020701, Steven Merrifield
menuconfig for arm, Li
- Re: menuconfig for arm, gerg
- Re: menuconfig for arm, somshekar kadam
very basic question, YoungHoon Park
- Re: very basic question, David McCullough
- Re: very basic question, gerg
About ToolChain for uC68VZ328, Rajendra Rajguru
about motorola dBUG, 峥明上官
- Re: about motorola dBUG, Wei Wang, P.E.
nfsroot for M5272C3, Bernhard Kuhn
CVS needs to be updated, Brian McRae
- Re: CVS needs to be updated, David McCullough
a little confused, Carlos Manuel Duclos Vergara
- Re: a little confused, Philip Nye
  - Re: a little confused, Carlos Manuel Duclos Vergara
BDM debugging of user applications, Ces Bertino
- Re: BDM debugging of user applications, Kendrick Hamilton
- Re: BDM debugging of user applications, Phil Wilshire
- RE: BDM debugging of user applications, Ces Bertino
  - Re: BDM debugging of user applications, David McCullough
- RE: BDM debugging of user applications, Mark Abbate
Trouble with GDB!!, Marcos Lois Bermúdez
Problem execute CGI with boa on uClinux, Van Duc Uy
- Re: Problem execute CGI with boa on uClinux, Ilguiz Latypov
  - Re: Problem execute CGI with boa on uClinux, Ilguiz Latypov
  - Re: Problem execute CGI with boa on uClinux, Van Duc Uy
    - Re: Problem execute CGI with boa on uClinux, Matthias Schoeldgen
ld-elf2flt (in cvs) contains absolute path, Fabrice Gautier
- Re: ld-elf2flt (in cvs) contains absolute path, David McCullough
  - Re: ld-elf2flt (in cvs) contains absolute path, Erik Andersen
    - Re: ld-elf2flt (in cvs) contains absolute path, David McCullough
- Re: ld-elf2flt (in cvs) contains absolute path, David McCullough
- RE: ld-elf2flt (in cvs) contains absolute path, Fabrice Gautier
  - Re: ld-elf2flt (in cvs) contains absolute path, David McCullough
Latest release of elf2flt ? (RE: elf2flt question), Fabrice Gautier
- Re: Latest release of elf2flt ? (RE: elf2flt question), David McCullough
- Re: Latest release of elf2flt ? (RE: elf2flt question), Greg Ungerer
  - Re: Latest release of elf2flt ? (RE: elf2flt question), Erik Andersen
    - Re: Latest release of elf2flt ? (RE: elf2flt question), David McCullough
SMSC LAN91C111 ethernet chip, Miles Bader
- Re: SMSC LAN91C111 ethernet chip, Greg Ungerer
  - Re: SMSC LAN91C111 ethernet chip, Kendrick Hamilton
    - Re: SMSC LAN91C111 ethernet chip, Lars Segerlund
    - Re: SMSC LAN91C111 ethernet chip, Sam Saprunoff
ARM and XIP, Thomas Eschenbacher
- Re: ARM and XIP, David McCullough
  - Re: ARM and XIP, Erik Andersen
  - Re: ARM and XIP, Thomas Eschenbacher
    - SIP stack for ucLinux, mawali
    - Re: SIP stack for ucLinux, v.nagasrinivas
    - Re: ARM and XIP, David McCullough
    - Re: ARM and XIP, Thomas Eschenbacher
    - Re: ARM and XIP, David McCullough
    - Re: ARM and XIP, Thomas Eschenbacher
    - Re: ARM and XIP, David McCullough
- RE: ARM and XIP, Fabrice Gautier
  - Re: ARM and XIP, Erwin Authried
    - Re: ARM and XIP / midori, Thomas Eschenbacher
    - Re: ARM and XIP / midori, Erwin Authried
  - Re: ARM and XIP, David McCullough
  - Re: ARM and XIP, David McCullough
- Re: ARM and XIP, mathias . fritzson
  - Re: ARM and XIP, David McCullough
- Re: ARM and XIP, mathias . fritzson
- RE: ARM and XIP, Fabrice Gautier
RE: Faking uClinux into using a limited amount of R AM, Subash Kalbarga
- Re: Faking uClinux into using a limited amount of R AM, David McCullough
- Re: Faking uClinux into using a limited amount of R AM, Greg Ungerer
about kernel, scheduling and tasks, Francesc Borrell Ros
Lineo USB Device Interface, Justin Wojdacki
Re: uClinux support for Hitachi SH-2, Fabio Giovagnini
- Re: uClinux support for Hitachi SH-2, yvon
- RE: uClinux support for Hitachi SH-2, Binoj.G.S
  - Re: uClinux support for Hitachi SH-2, Fabio Giovagnini
  - Message not available
    - Re: uClinux support for Hitachi SH-2, David McCullough
    - Re: uClinux support for Hitachi SH-2, Fabio Giovagnini
    - Message not available
    - Re: uClinux support for Hitachi SH-2, David McCullough
    - Re: uClinux support for Hitachi SH-2, Fabio Giovagnini
- RE: uClinux support for Hitachi SH-2, James
  - RE: uClinux support for Hitachi SH-2, yvon
Basic question about MTD and JFFS, 박영훈
- AW: Basic question about MTD and JFFS, Juergen Mueller
- Re: Basic question about MTD and JFFS, V Kugan
m68k-elf section problem?, zhanglei
- Re: m68k-elf section problem?, Carlos Manuel Duclos Vergara
- Re: m68k-elf section problem?, Greg Ungerer
new distribution snapshot, Greg Ungerer
uClinux patches against 2.5.25, Greg Ungerer
symbol clash between libc and libpthread, Lance Spaulding
Interrupts masked for long periods, Carsten Neumann
Faking uClinux into using a limited amount of RAM, Russ Cooper
- Re: Faking uClinux into using a limited amount of RAM, Phil Wilshire
  - Re: Faking uClinux into using a limited amount of RAM, Phil Wilshire
    - Re: Faking uClinux into using a limited amount of RAM, Russ Cooper
    - Re: Faking uClinux into using a limited amount of RAM, gerg
    - Re: Faking uClinux into using a limited amount of RAM, Russ Cooper
    - Re: Faking uClinux into using a limited amount of RAM, David McCullough
    - Re: Faking uClinux into using a limited amount of RAM, Russ Cooper
    - Re: Faking uClinux into using a limited amount of RAM, David McCullough
    - Re: Faking uClinux into using a limited amount of RAM, Russ Cooper
m68k-elf utils.., Cihan Esen
CoLilo..again..:(.., Cihan Esen
Buffer handling problem (ll_rw_blk), Elek Robert
- Re: Buffer handling problem (ll_rw_blk), David McCullough
  - Re: Buffer handling problem (ll_rw_blk), Elek Robert
(unknown), Guifang Wu
- Re:, Phil Wilshire
Re: About dinamic libraries??, Marcos Lois Bermúdez
- Re: About dinamic libraries??, paulI
questions..., v.nagasrinivas
CoLilo.., Cihan Esen
Assembler ERROs?, 侯杰 Bob Hou
Re: uClinux-2.4 with 256kB RAM? / ELF execute in place, Thomas Eschenbacher
- Re: uClinux-2.4 with 256kB RAM? / ELF execute in place, David McCullough
sys_mmap, how to debug?, Pham Cong Thien
- Re: sys_mmap, how to debug?, V Kugan
- Re: sys_mmap, how to debug?, V Kugan
GoAhead WebServer on uClinux, Maoyi Fan
Solved: 2.4 kernel pushes bad return PC at interrupts, Carsten Neumann
ColdFire MBUS in kernel 2.4, Carsten Neumann
Generating a small program from assembly source, Alan Carvalho de Assis
www.uclinux.org site down?, andersn
- Re: www.uclinux.org site down?, mdurrant
- Re: www.uclinux.org site down?, Thomas Eschenbacher
- Re: www.uclinux.org site down?, Thomas Eschenbacher
  - Re: www.uclinux.org site down?, mdurrant
    - Re: www.uclinux.org site down?, Duc Uy
    - Re: www.uclinux.org site down?, Phil Wilshire
    - Re: www.uclinux.org site down?, Thomas Eschenbacher
Re: Patches for console shell/init and big image size bugs, Heiko Degenhardt
- Re: Patches for console shell/init and big image size bugs, Matthias Schoeldgen
  - Re: Patches for console shell/init and big image size bugs, David McCullough
- Re: Patches for console shell/init and big image size bugs, Phil Wilshire
- Re: Patches for console shell/init and big image size bugs, Heiko Degenhardt
telnet client for ARM problem, Stella
Re: Dereferencing odd-valued 'pointer to short', Russ Cooper
- Re: Dereferencing odd-valued 'pointer to short', gerg
- RE: Dereferencing odd-valued 'pointer to short', John Passaniti
ucLinux and semaphores, G M
- RE: ucLinux and semaphores, Robert Daniels
Re: Loadable modules and 2.0 kernel, Kendrick Hamilton
- Re: Loadable modules and 2.0 kernel, mathias . fritzson
  - Re: Loadable modules and 2.0 kernel, Kendrick Hamilton
Re: qspi on 5272, Yosh K
- Re: qspi on 5272, Phil Wilshire
  - Re: qspi on 5272, Mark Yeck
    - Re: qspi on 5272, Greg Ungerer
    - Re: qspi on 5272, Mark Yeck
  - Re: qspi on 5272, Greg Ungerer
    - Re: qspi on 5272, Phil Wilshire
- Re: qspi on 5272, Julien Boibessot
  - Re: qspi on 5272, Mark Yeck
    - Re: qspi on 5272, Julien Boibessot
    - Re: qspi on 5272, Mark Yeck
- Re: qspi on 5272, Ron Fial
  - Re: qspi on 5272, Phil Wilshire
  - Re: qspi on 5272, Greg Ungerer
- Re: qspi on 5272, Ron Fial