I upgraded to FreePBX 2.0.1 and now I get no incoming calls (outbound
still work OK). This was working yesterday, before I upgraded
I use VoipJet for outbound and Junction Network for incoming.
It appears I'm registering with Junction Network:
asterisk1*CLI> iax2 show peers
Name/Username Host Mask Port Status
voipjet/xxxx 66.246.220.19 (S) 255.255.255.255 4569
Unmonitored
jnctn_out/xxxx 66.227.100.30 (S) 255.255.255.255 4569
Unmonitored
2 iax2 peers [0 online, 0 offline, 2 unmonitored]
asterisk1*CLI>
asterisk1*CLI> iax2 show registry
Host Username Perceived Refresh State
66.227.100.30:4569 myusername 71.xxx.xxx.xxx:4569 60 Registered
asterisk1*CLI>
When I call my Junction Network DID, I get a recording:
"Call can't be completed as dialed. check number and dial again."
Was there something I needed to do in the web GUI to set it up? I
guessed it should have worked after doing the upgrade, with no problems.
I guess it could be a Junction Network problem...
Additionally, FOP is not working, either - it never loads in the web
page, just hangs forever.
Any help appreciated.
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
|
