hank smith wrote:
hmmm
it seems to answer the line but hangs up write away I have never ran in
to this with aah its plugged in to the line and everything
Please paste Asterisk console output for an incoming call - but I'm
guessing it'll look like the output in the following:
http://sourceforge.net/mailarchive/message.php?msg_id=15067735
You probably need to use the solution there as well.
Regards,
Jason
----- Original Message ----- From: "Jason Becker"
<jason-pOvDS6c5wt32nE3gcF9HJ8PWbZVgNyiZ@xxxxxxxxxxxxxxxx>
To: <amportal-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@xxxxxxxxxxxxxxxx>
Sent: Monday, March 20, 2006 8:27 AM
Subject: Re: [Amportal-users] info that zap show status gives
hank smith wrote:
hello the info I am getting when I show zap show status is:
Command:
zap show status
Execute:
table end
Description Alarms IRQ bpviol
CRC4
Wildcard X101P Board 1 RED 0 0 0
ZTDUMMY/1 1 UNCONFIGUR 0 0 0
Verbosity is at least 3
does this give any info on why this is hanging up on inbound calls?
If you have a telephony card installed, and you do in the form of an
X101P, then you don't need to load the ztdummy kernel module.
The X101P reports a RED alarm which normally means that the phone line
isn't plugged in.
Regards,
--
Jason Becker
Director & CEO
Coalescent Systems Inc.
Tomorrow's Telephony Today
403.244.8089
www.coalescentsystems.ca
www.gabcast.com
--
Jason Becker
Director & CEO
Coalescent Systems Inc.
Tomorrow's Telephony Today
403.244.8089
www.coalescentsystems.ca
www.gabcast.com
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
|
