telephony.pbx.asterisk.amportal.user (thread)

SUSCRIBE, Aldo Leyva
- Message not available
  - Re: SUSCRIBE, Matt Riddell (IT)
re: AMP backup + restore? (Remco Barende), Paul
AMP backup + restore?, Remco Barende
cdr_mysql, Remco Barende
- Message not available
  - Re: cdr_mysql, Jason Becker
    - Message not available
    - Re: cdr_mysql, Remco Barende
    - Message not available
    - Languages, Nelson Tactuk
Codecs for trunks?, Remco Barende
- Message not available
  - Re: Codecs for trunks?, Rob Hillis
    - Re: Codecs for trunks?, hank smith
Record on demand & System giving busy signal, MBIT Technologies
- Re: Record on demand & System giving busy signal, Dan Littlejohn
SIP & NAT PROBLEMS - ANY SOLUTION?, Wasif Khan
- Message not available
  - Re: SIP & NAT PROBLEMS - ANY SOLUTION?, Lee Marzke
    - Message not available
    - Re: SIP & NAT PROBLEMS - ANY SOLUTION?, B Boc
    - Message not available
    - Re: SIP & NAT PROBLEMS - ANY SOLUTION?, B Boc
- Message not available
  - Re: SIP & NAT PROBLEMS - ANY SOLUTION?, Nelson Tactuk
Predictive Dialer, Wasif Khan
Outbound routes not rolling., Fritz Hayes
- Message not available
  - RE: Outbound routes not rolling., David Phelan
- RE: Outbound routes not rolling., Fritz Hayes
  - Message not available
    - RE: Outbound routes not rolling., David Phelan
- RE: Outbound routes not rolling., Fritz Hayes
This week's poll: Were you, or any of your customers, affected by the "timebomb" bug?, Jason Becker
Syntax error in logs, Paul A. Pringle
- Message not available
  - Re: Syntax error in logs, Kevin Hanson
sip trunk-outbound diling, Betül Gözlükoğlu
- sip trunk-outbound diling, betul-DkbrB8mJDsaVzLqbK/TTtQ
- sip trunk-outbound diling, Betül Gözlükoğlu
How to remove requirement for dialing 1 and/or area code, Roger Hanson
- Message not available
  - Re: How to remove requirement for dialing 1 and/or area code, Greg MacLellan
    - Message not available
    - Re: How to remove requirement for dialing 1 and/or area code, Ryan Courtnage
    - Message not available
    - Re: How to remove requirement for dialing 1 and/or area code, Ryan Courtnage
- RE: How to remove requirement for dialing 1 and/or area code, Peter Rofner
(no subject), Greg Dotts
is anyone using spectravoice ?, Robin Mordasiewicz
Speed dials, Remco Barende
DB Error: unknown error, B Boc
I need a new provider - can no longer use babytel, Robin Mordasiewicz
- Message not available
  - Re: I need a new provider - can no longer use babytel, Darren Wiebe
    - Message not available
    - Re: I need a new provider - can no longer use babytel, Robin Mordasiewicz
    - Message not available
    - Re: I need a new provider - can no longer use babytel, Lee Marzke
    - Message not available
    - Re: I need a new provider - can no longer use babytel, Nelson Tactuk
    - Message not available
    - I need a good provider for the Dominican Republic, Nelson Tactuk
    - Message not available
    - RE: I need a good provider for the Dominican Republic, B Boc
    - Message not available
    - RE: I need a good provider for the Dominican Republic, Nelson Tactuk
    - Message not available
    - Re: I need a new provider - can no longer use babytel, Samy Antoun
can't access amp functionality, B Boc
- Message not available
  - RE: can't access amp functionality, Mark Coetser
    - RE: can't access amp functionality, B Boc
    - Message not available
    - Re: can't access amp functionality, Diego Iastrubni
    - Message not available
    - Re: can't access amp functionality, B Boc
    - Message not available
    - Re: can't access amp functionality, Diego Iastrubni
- Re: can't access amp functionality, B Boc
CallerID best way, Vendors
Why is agents.conf not utilized? (aka: can't find good info on agents and queues for AMP), Ben Ferguson
FOP won't start, just hangs, Roger Hanson
- Message not available
  - RE: FOP won't start, just hangs, Mark Coetser
    - Re: FOP won t start, just hangs, Roger Hanson
    - Message not available
    - RE: FOP won t start, just hangs, Mark Coetser
    - Re: FOP won t start, just hangs, Roger Hanson
This week's poll: Your thoughts about DUNDi?, Jason Becker
hundreds of defunct dialparties.agi and recordingcheck, Gregory L Miller-Kramer
- re: hundreds of defunct dialparties.agi and recordingcheck, Ryan Courtnage
  - Message not available
    - Re: re: hundreds of defunct dialparties.agi and recordingcheck, Tom Vile
- Re: re: hundreds of defunct dialparties.agi and recordingcheck, Gregory L Miller-Kramer
Queue Announcements not playing while waiting, heathtaylor-FdZZSkQobVDz1n+OaKNE4w
Why to databases? Asterisk and Asteriskcdrdb, Ben Ferguson
- Re: Why to databases? Asterisk and Asteriskcdrdb, Diego Iastrubni
Error when upgrading from 1.10.008 to 1.10.010, Ariel Batista
- Message not available
  - Re: Error when upgrading from 1.10.008 to 1.10.010, Diego Iastrubni
2.0Beta, Niklas Larsson
Call recordings problem, Mauricio Valencia
Adding "Please Hold...", Jeremi Bergman
- Message not available
  - RE: Adding "Please Hold...", Azfhasterisk
ZAP Trunk & QUAD CARD, Wasif Khan
This week's poll: If Asterisk had an animal mascot it would be a ..., Jason Becker
- Message not available
  - RE: This week's poll: If Asterisk had an animal mascot it would be a ..., Kerry Garrison
    - Re: This week's poll: If Asterisk had an animal mascot it would be a ..., Jason Becker
    - Message not available
    - RE: This week's poll: If Asterisk had an animal mascot it would be a ..., Kerry Garrison
dnid, Evert Meulie
- Message not available
  - Re: dnid, Tom Vile
AMP and additional conf files, Ben Ferguson
- Re: AMP and additional conf files, Tom Vile
- default context messed up, Ben Ferguson
  - Re: default context messed up, Ariel Batista
    - Message not available
    - RE: default context messed up, Ben Ferguson
    - Message not available
    - RE: default context messed up, Ben Ferguson
- AMP and additional conf files, Paul
Manage CDR databse., Chris Modesitt
- Re: Manage CDR databse., Sean Cook
Enhance Me 1.004 Released!, Paul
- Message not available
  - RE: Enhance Me 1.004 Released!, Kerry Garrison
    - Re: Enhance Me 1.004 Released!, Sean Cook
- FW: Enhance Me 1.004 Released!, Paul
Silence Suppression, Jason Ferezy
- Silence Suppression, Jason Ferezy
Incoming Ring, Mark Coetser
- Re: Incoming Ring, Rob Hillis
New AMPortal packages available for Rapid 1.1, Diego Iastrubni
- Re: New AMPortal packages available for Rapid 1.1, hank smith
  - Re: New AMPortal packages available for Rapid 1.1, Diego Iastrubni
    - Message not available
    - RE: New AMPortal packages available for Rapid 1.1, Mark Coetser
    - Re: New AMPortal packages available for Rapid 1.1, Diego Iastrubni
    - Re: New AMPortal packages available for Rapid 1.1, hank smith
- Message not available
  - Re: New AMPortal packages available for Rapid 1.1, Robin Mordasiewicz
    - Message not available
    - Re: New AMPortal packages available for Rapid 1.1, Diego Iastrubni
- Message not available
  - RE: New AMPortal packages available for Rapid 1.1, Mark Coetser
Users from Turkey, Kerem Erciyes
Amp Maintenance Section, James Childers
- Message not available
  - Re: Amp Maintenance Section, Tom Vile
- Message not available
  - Re: Amp Maintenance Section, Jonathan Attwood
- Message not available
  - Re: Amp Maintenance Section, Asterisk@Home
- Message not available
  - Re: Amp Maintenance Section, Jason Becker
This week's poll: PSTN-VoIP Gateway?, Jason Becker
- Message not available
  - Re: This week's poll: PSTN-VoIP Gateway?, Ariel Batista
Cannot Connect to Asterisk Manager with "User info", Jason Ferezy
- Re: Cannot Connect to Asterisk Manager with "User info", eMail from ChrisG
  - Re: Cannot Connect to Asterisk Manager with "User info", Jason Ferezy
    - Re: Cannot Connect to Asterisk Manager with "User info", eMail from ChrisG
    - Re: Cannot Connect to Asterisk Manager with "User info", Jason Ferezy
    - Message not available
    - Re: Cannot Connect to Asterisk Manager with "User info", Jason Ferezy
    - Re: Cannot Connect to Asterisk Manager with "User info", eMail from ChrisG
    - Message not available
    - Re: Cannot Connect to Asterisk Manager with "User info", Jason Becker
    - Message not available
    - Re: [Spam] Re: Cannot Connect to Asterisk Manager with"User info", Jason Ferezy
    - Message not available
    - Re: Cannot Connect to Asterisk Manager with "User info", Diego Iastrubni
Easiest way to remove extension from directory context?, Lex Lethol
Re: Buttons wrap and overlap, Tom Tune
unable to use amportal startup script, John Covici
Subject: ** VoIP IAX/SIP Termination For MEXICO, p m
AMP: Losing backslash characters in config files, Steve Langstaff
New Support Service Offering, Jason Becker
Hardware Module, Sean Cook
- RE: Hardware Module, Steve Totaro
  - Message not available
    - Re: Hardware Module, Sean Cook
    - Message not available
    - Re: Hardware Module, Diego Iastrubni
How to put a wait for analog lines, Jason Romo
- Message not available
  - RE: How to put a wait for analog lines, Kerry Garrison
- Message not available
  - Re: How to put a wait for analog lines, Tom Vile
    - Message not available
    - Re: How to put a wait for analog lines, Jason Romo
    - Message not available
    - Re: How to put a wait for analog lines, Kevin Hanson
    - Message not available
    - Re: How to put a wait for analog lines, Jason Romo
- Message not available
  - Re: How to put a wait for analog lines, Kevin Hanson
- RE: How to put a wait for analog lines, Steve Totaro
calling card, Philip Owusu
- calling card, Philip Owusu
different profiles, Ali Moh'd Al-Jadiri
- Message not available
  - Use of different languages, Nelson Tactuk
- Re: different profiles, Paul C
- Message not available
  - Re: different profiles, Diego Iastrubni
- RE: different profiles, Picher, Michael
Re: Re: [Asterisk-biz] This week's poll: All I Want for Christmas is..., Chris Mason (Lists)