Re: Re: Build of generic target fails

Hi Marc,

you have a lot of packages that have not been build successfully, like
grub, iproute2 and shadow. Some of theses are essential to generate
the initrd. Possibly these failures are due to your experiments with
tmpfs? To rebuild packages that have once failed you either have to
enable this option with the Config script, or remove them from the
build tree with "./scripts/Create-ErrList -cfg <...> -remove <package
name>".

The package alsa-utils fails because it depends on alsa-lib which was
not included in the generic desktop package list. This is fixed in SVN
now.

Michael


2007/9/6, Marc Blumentritt <marc.blumentritt@xxxxxxxx>:
>
> Rene? Anyone?
>
> Regards,
> Marc
>
>
> Marc Blumentritt schrieb:
> > René Rebe schrieb:
> >> Yes, then it's due tmpfs as the tmpfs option is about building every
> >> package in such as RAM fs. Obviously with GCC, Mozilla, OpenOffice
> >> et al. this option is only of use with GBs of RAM :-)
> >
> > OK, now it built more packages, but I got (at the end?) these messages:
> >
> > --snip--
> > == 15:06:17 =[5]=> Building audio/alsa-utils [1.0.14 8.0-trunk] .
> > -> Parallel build using 3 jobs enabled.
> > -> Preparing build in src.alsa-utils.default.20070901.150617.30232.hive
> > -> Building. Writing output to $root/var/adm/logs/5-alsa-utils.out
> > !> checking for a BSD-compatible install...
> > /TOOLCHAIN/build/default-8.0-trun ..
> > !> checking whether ln -s works... yes
> > !> checking for ALSA CFLAGS...
> > !> checking for ALSA LDFLAGS...  -lasound -lm -ldl -lpthread
> > !> checking for libasound headers version >= 1.0.12... not present.
> > !> configure: error: Sufficiently new version of libasound not found.
> > !> Due to previous errors, no 5-alsa-utils.log file!
> > !> (Try enabling xtrace in the config to track an error inside the build
> > syst ..
> > -> $root/var/adm/logs/5-alsa-utils.out -> 5-alsa-utils.err
> > == 09/01/07 15:06:22 =[5]=> Aborted building package alsa-utils .
> > !> Creation of binary package isn't possible, because the package was not
> > !> built successfully in (at least) the current stage.
> >
> > Searching for old lingering files ...
> > -> None found.
> >
> > Finishing build.
> > -> Creating package database ...
> > !> Binary file for alsa-utils-1.0.14.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for cracklib-2.8.10.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for curl-7.16.3.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for ethtool-6.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for fget-0.4.1.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for gettext-0.16.1.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for grub-0.97.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for iproute2-2.6.19-061214.tar.bz2 not present. Skipped
> > in package database.
> > !> Binary file for mine-0.23.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for net-tools-1.60.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for pam-0.99.8.1.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for popt-1.10.7.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for psmisc-22.5.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for rsync-2.6.9.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for shadow-4.0.18.1.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for sysfiles-0000.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for sysvinit-2.86.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for unionfs-0.2.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for wget-1.10.2.tar.bz2 not present. Skipped in package
> > database.
> > !> Binary file for wireless-tools-28.tar.bz2 not present. Skipped in
> > package database.
> > !> Binary file for zile-2.2.41.tar.bz2 not present. Skipped in package
> > database.
> > -> Creating output image ...
> > cp: cannot stat
> > `/home/root_dev/T2/t2-trunk/build/default-8.0-trunk-generic-x86-nocona/usr/sbin/ipconfig':
> > No such file or directory
> > -> Unmounting loop mounts ...
> > --snip--
> >
> > What got wrong? How can I change this?
> >
> > I used "minimal-desktop" in my config. Could this be a problem?
> >
> > Regards,
> > Marc
> >
> >
> >
> > -----------------------------------------------------------
> > If you wish to unsubscribe from this mailing, send mail to
> > lists@xxxxxxxxxxxxxx with a subject of: unsubscribe t2
> >
>
>
>
> -----------------------------------------------------------
> If you wish to unsubscribe from this mailing, send mail to
> lists@xxxxxxxxxxxxxx with a subject of: unsubscribe t2
>

----------------------------------------------------------- 
If you wish to unsubscribe from this mailing, send mail to
lists@xxxxxxxxxxxxxx with a subject of: unsubscribe t2