Re: FW 4.1.1 FP02 - Health Check Flags not setting [RESOLVED]

I restarted the epmgr instead of updating,
this resolved the problem.



owner-tme10@xxxxxxxxxxxxxxxx wrote on 17/03/2005 14:57:47:

> 
> Thanks for the reply... 
> 
> That's the strange thing Daniel, the epstatus_interval is set at 
> default 60 mins, so I would of assumed that it would of been an hour
> or so from when the wepstatus command was issued to when the EP MGRs
> data for that endpoint was updated, the flags have still not set 3
> days after. :O(.
> 
> 

> 
> "Audley, Daniel J" <daniel.j.audley@xxxxxxxxxxxxxxxxx>
> Sent by: owner-tme10@xxxxxxxxxxxxxxxx 
> 17/03/2005 14:31 
> 
> Please respond to
> tme10@xxxxxxxxxxxxxxxx
> 
> To
> 
> tme10-digest@xxxxxxxxxxxxxxxx 
> 
> cc
> 
> Subject
> 
> [tme10] FW 4.1.1 FP02 - Health Check Flags not setting
> 
> 
> 
> 
> In TMF-4.1.1-FP02, the endpoint health checking is taken from the
> gateway and stored in the Endpoint Manager.  To control this
> replication, you must set one of the two new endpoint manager parameters
> "epstatus_interval" to an interval that makes sense for
your
> environment.
> 
> The wep command does not pull from the gateway like wepstatus does,
its
> data comes from the endpoint manager.
> 
> Hope this helps.
> 
> Daniel J. Audley
> Bank of America
> MTI - Software Management Engineering
> Certified IBM Tivoli Deployment Specialist - CM 4.2 & ITM 5.1
> 704.388.9547/704.506.3081 
> 
> 
> 
> This e-mail contains information that may be confidential or 
> privileged. If you are not the intended recipient please note that
> any copying, use, distribution or taking any action in reliance on
> the contents of this e-mail is prohibited and unlawful. If you have
> received this e-mail in error, please notify the sender by telephone
> or e-mail immediately. Any opinions expressed are those of the 
> author and do not necessarily represent the views of Syan Ltd. This
> e-mail does not constitute either offer or acceptance of any 
> contractually binding agreement; such offer or acceptance can only
> be communicated in writing.
> 
> Syan reserves the right to monitor and intercept e-mails sent and
> received on our network. 
> 
> In accordance with good computing practice the recipient is advised
> to ensure that this e-mail is virus free.
 
This e-mail contains information that may be confidential or privileged. If you are not the intended recipient please note that any copying, use, distribution or taking any action in reliance on the contents of this e-mail is prohibited and unlawful. If you have received this e-mail in error, please notify the sender by telephone or e-mail immediately. Any opinions expressed are those of the author and do not necessarily represent the views of Syan Ltd. This e-mail does not constitute either offer or acceptance of any contractually binding agreement; such offer or acceptance can only be communicated in writing.
 
Syan reserves the right to monitor and intercept e-mails sent and received on our network. 

In accordance with good computing practice the recipient is advised to ensure that this e-mail is virus free.