Re: [TMF4.1.1] lowlevel command to obtain endpoint ip address on NAT enabled TME

So you are asking for the real address of the endpoint that is on the other
side of a NAT firewall?

This information would not be available to the Endpoint Manager. In a
configuration like this, you would be using the name of the endpoint to
communicate with it, and the name is converted by the appropriate naming
service to an IP address, which will be converted to the real address when
it passes through the firewall.

An IP address may be stored in the Endpoint Manager database, but this
address is very likely to be the NAT'd address, not the real one. Is this
the IP address you are asking for?


Gary R. Hamilton
Team Leader
Senior Software Engineer
IBM Software Group - Tivoli Software (UK)
Global Response Team - Europe/Middle East/Africa
+44(0)1753-780-988
mobile: +44(0)780-820-3714
e-mail:hamilgar@xxxxxxxxxx
____________________________________________
AskTivoli -  http://www-3.ibm.com/software/sysmgmt/products/support/
Web PMR submission - http://www-3.ibm.com/software/support/probsub.html


                                                                           
             joel_n_mokoetle@b                                             
             ankone.com                                                    
             Sent by:                                                   To 
             owner-tme10@lists         <tme10@xxxxxxxxxxxxxxxx>            
             .us.ibm.com                                                cc 
                                                                           
                                                                   Subject 
             24/02/2005 17:10          [tme10] [TMF4.1.1] lowlevel command 
                                       to obtain endpoint ip address on    
                                       NAT enabled TME                     
             Please respond to                                             
                   tme10                                                   
                                                                           
                                                                           
                                                                           
                                                                           





Can someone please tell me the low level (i.e. objcall,idcall,etc.) command
to obtain the IP ADDRESS of an endpoint on a Tivoli Management Environment
that has NAT enabled? I need the IP as registered in on the TMR.

Thanking you in advance,
Napo

***************************************************************
JPMorganChase - Systems & Service Management Tools Engineer
Tel: 614-213-8599
Pager: 888-636-2381
"If you look in your dictionary, you'll find that the meaning of the word
'single' is not single!" UNKNOWN
*************************************************************

This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the
intended recipient, you are hereby notified that any disclosure, copying,
distribution, or use of the information contained herein (including any
reliance thereon) is STRICTLY PROHIBITED. If you received this transmission
in error, please immediately contact the sender and destroy the material in
its entirety, whether in electronic or hard copy format. Thank you.