RE: [ITM] winstlcf could not determine INTERP

I couldn't find any reference about rcmd in the Tivoli Enterprise
Installation
manual. Would it not the rexec and rsh commands?

I changed the /etc/xinet.d/rsh and /etc/xinet.d/rexec endpoint files
enabling execution of
rsh and rexec.

Am I missing something?

> Have you checked if the Linux has rcmd service active in the inetd.conf ?
> In general Linux distros does not make it active by default, and winstlcf
> is based on remote commands.
>
> Good luck!
>
> Gerson Koji Saito - Certified IT Specialist
> IBM Software Group
> Phone : +55-11-2132-3309   Fax: +55-11-2132-5534
> Email : saito-xuelUoVDAHHQT0dZR+AlfA@xxxxxxxxxxxxxxxx
>
>
>
>
> "Silvis, Jasper E. (MBS)" 
> <Jasper.Silvis-UUSGX2jyPCJpFjMZrrdVc9BPR1lH4CV8@xxxxxxxxxxxxxxxx>
> Sent by: owner-tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx
> 13/04/2004 18:29
> Please respond to
> tme10
>
>
> To
> "'tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx'" <tme10@xxxxxxxxxxxxxxxx>
> cc
>
> Subject
> RE: [tme10] [ITM] winstlcf could not determine INTERP
>
>
>
>
>
>
> I have had the best luck with Linux endpoint installations using the
> Brandon
> Mitchell approach of tarballing the endpoint image for the linux-ix86
> interp
> and installing that from the Linux server.  I am using LCF v41100 with no
> problems.
>
> Let me know if you need guidance.  You may already use this solution for
> DMZ
> installations (pre-TMF411, that is).
>
> Best of luck,
>
> Jasper Silvis
> Cendant Mortgage
>
> -----Original Message-----
> From: owner-tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx
> [mailto:owner-tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx]On Behalf Of
> creimer-fYYQp3cRR0E39yzSjRtAkw@xxxxxxxxxxxxxxxx
> Sent: Tuesday, April 13, 2004 3:05 PM
> To: tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx
> Subject: Re: [tme10] [ITM] winstlcf could not determine INTERP
>
>
> Now, at the endpoint we dropped the line inserted before to solve TMR name
> and a new entry on the endpoint DNS was made so the TMR name could be
> resolved by DNS and not by /etc/hosts at the endpoint.
>
> But the problem was not solved and winstlcf still complaining.
>
>>
>> Can you resolve both hostnames and the ip addresses using nslookup on
> both
>> servers (TMR and Endpoint) ?
>>
>> John F. Mostler
>> Certified Tivoli Consultant
>> New York Life
>> john_mostler-H66Kdd6cy6IQQYfiE9goCw@xxxxxxxxxxxxxxxx
>> (908) 236-3262
>>
>>
>>
>>           143
>>
>>
>>
>>
>>
>>
>>                       "creimer-fYYQp3cRR0E@xxxxxxxxxxxxxxxx
>>                       .com.br" <creimer        To:
>> tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx
>>                       Sent by:                 cc:
>>                       owner-tme10-gDVLAvcG/0E@xxxxxxxxxxxxxxxx        
>> Subject:  [tme10] [ITM]
>> winstlcf could not determine INTERP
>>                       .us.ibm.com
>>
>>
>>                       04/13/2004 02:38
>>                       PM
>>                       Please respond to
>>                       tme10
>>
>>
>>
>>
>>
>>
>> Hi,
>>
>> I'm installing LCF in a Linux box and the winstlcf command returns the
>> error:
>>
>> Could not determine INTERP for host lua.
>>  Remote error: (null) (null) (null) (null)
>>  Standard Error: Host key verification failed.
>>
>> What could be wrong?
>>
>> Thanks in advace!
>>
>> --------------------------------------------
>> Reimer
>> creimer-fYYQp3cRR0E39yzSjRtAkw@xxxxxxxxxxxxxxxx / www.quicksoft.com.br
>> Fone: (47) 231-6500 - Fax: (47) 231-6515
>>
>>
>>
>>
>>
>>
>
>
> --------------------------------------------
> Reimer
> creimer-fYYQp3cRR0E39yzSjRtAkw@xxxxxxxxxxxxxxxx / www.quicksoft.com.br
> Fone: (47) 231-6500 - Fax: (47) 231-6515
>
>


--------------------------------------------
Reimer
creimer-fYYQp3cRR0E39yzSjRtAkw@xxxxxxxxxxxxxxxx / www.quicksoft.com.br
Fone: (47) 231-6500 - Fax: (47) 231-6515