Subject: Re: spawn_impl .. another one - msg#00842

Previous Message by Date: click to view message preview

Re: [EC] tec_task eating CPU on TEC 3.9 Solaris

Thanks Ralph - very timely info - works a treat! Presumably this is true for all architectures, not just Solaris? Many thanks, Jane Ralph Baldwin wrote: in the TEC_RULES/tec_forward.conf file, insert "BufferEvents=NO". compile and load the rulebase, cycle TEC. tec_task cpu usage should be very small. an issue in the tmf code to do with processing timers causes this little gotcha. Cheers, Ralph Baldwin Internet email: baldwinr-r/Jw6+rmf7HQT0dZR+AlfA@xxxxxxxxxxxxxxxx Advisory Software Engineer IBM Software Group - Tivoli Software Performance & Availability Office: 512-286-3665 *"John Guadagnino" <John_Guadagnino-/ycjK0B6GM4@xxxxxxxxxxxxxxxx>* Sent by: owner-tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx 01/29/2004 01:58 PM Please respond to tme10 To: tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx cc: Subject: RE: [tme10] [EC] tec_task eating CPU on TEC 3.9 Solaris When you say "512Mb" you are referring to installed memory? That's not much in this day & age ... what about processors? How many? How fast? In the TEC 3.9 Installation Guide, Chapter 1 "Planning for Installation", there is a chart (Table 1) that shows minimum & recommended hardware features (memory, cpu, & diskspace) for the various configurations of installed software. We installed TEC 3.9 fresh last month on a Sun E420R w/ 4x450mhz cpus & 2 gigs ram (Solaris 8). We upgraded memory to 4 gigs a couple weeks ago because we expect to hammer this box, and so far it is humming along just nicely. We run event server, RIM, event database (Oracle 9i), ui_server, TEC console, TEC gateway and an endpoint gateway all on this one managed node. hth, John Guadagnino Gap Inc. -----Original Message----- From: Jane Curry [mailto:jane.curry-jA32l5flodesayCdfgGAnA@xxxxxxxxxxxxxxxx] Sent: Thursday, January 29, 2004 11:21 AM To: tme10 Subject: [tme10] [EC] tec_task eating CPU on TEC 3.9 Solaris I have just installed TEC 3.9 on 512Mb Solaris 2.8 system. Performance is dog-like. tec_task seems to be the main culprit. I went with a "take-all-the defaults" install, including rulesets. Anyone else seen this before I start debugging what's going on? Cheers, Jane -- Tivoli Certified Consultant & Instructor Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK Tel: +44 (0)1628 782565 Copyright (c) 2004 Jane Curry <jane.curry-jA32l5flodesayCdfgGAnA@xxxxxxxxxxxxxxxx>. All rights reserved. -- Tivoli Certified Consultant & Instructor Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK Tel: +44 (0)1628 782565 Copyright (c) 2004 Jane Curry <jane.curry-jA32l5flodesayCdfgGAnA@xxxxxxxxxxxxxxxx>. All rights reserved.

Next Message by Date: click to view message preview

Re: something wrong with mailer?

I have also recd the messsage. Whats wrong. Regards, C Mugilan Troy Parry <troyparry-sJll5ZL6roY@xxxxxxxxxxxxxxxx To: Tivoli <tme10@xxxxxxxxxxxxxxxx> com> cc: Sent by: Subject: [tme10] something wrong with mailer? owner-tme10-gDVLAvcG/0E@xxxxxxxxxxxxxxxx .us.ibm.com 01/30/2004 05:40 AM Please respond to tme10 Hi list, This morning I found that I had 26 emails from ITSO_MODERATOR and 1 from owner-tme10@ lists.us.ibm.com. All of them had no subject and no content. Is something not working? Regards, Troy Parry StarHub Singapore http://greetings.yahoo.com.au - Yahoo! Greetings Send your love online with Yahoo! Greetings - FREE! InterScan_Disclaimer.txt Description: Text document

Previous Message by Thread: click to view message preview

spawn_impl .. another one

Hi List, i got a strange problem since a few days .. I created an Admin in my NT4 - Domain for installing Tivoli Endpoints. Now i'm installing Endpoints via winstlcf. After reboot the Endpoint, the Installation seemed to be ok. But then i test the Framework: / :> wadminep sip0 view_version Performing browse mode 'view_version' on endpoint 'sip0' EXCEPTION spawn_impl, could not spawn method as user tmersrvd. / :> wadminep sip0 reexec_lcfd Performing administrative mode 'reexec_lcfd' on endpoint 'sip0' EXCEPTION spawn_impl, could not spawn method as user Tivoli_Admin. / :> So i put loglevel 2 on it: Jan 30 10:41:04 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\TME\INVENTORY\inv_config_ep_meths.exe, ses: 14cb380c Jan 30 10:41:04 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user Tivoli_Admin. Jan 30 10:41:04 Q lcfd send_exception (len) 421 Jan 30 10:41:04 Q lcfd Entering send_methstat Jan 30 10:41:04 Q lcfd Entering send_struct Jan 30 10:41:04 Q lcfd net_send of 479 bytes, session 348862476 Jan 30 10:41:04 Q lcfd Leaving send_struct Jan 30 10:41:04 Q lcfd Leaving send_methstat Jan 30 10:41:04 Q lcfd Entering Listener (running). Jan 30 10:41:04 Q lcfd Waiting for connection... Jan 30 10:41:04 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:41:04 Q lcfd cti_accept (timeout=-1) Jan 30 10:44:27 Q lcfd New connection from 144.19.3.150+2462 Jan 30 10:44:27 Q lcfd Checking for pending connections...before continuing Jan 30 10:44:28 Q lcfd No connections are pending Jan 30 10:44:28 2 lcfd Receive attempt 1 of 10 for data on network connection 144.19.3.150+2462 Jan 30 10:44:28 Q lcfd Entering net_recv, receive a message Jan 30 10:44:28 Q lcfd Leaving net_recv: bytes=200, (type=0 session=348862477) Jan 30 10:44:28 2 lcfd Data was successfully received Jan 30 10:44:28 2 lcfd CacheCheckExistence: Found: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe Jan 30 10:44:28 Q lcfd setting-up inherit fd. netfd=148 Jan 30 10:44:28 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe, ses: 14cb380d Jan 30 10:44:28 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user tmersrvd. Jan 30 10:44:28 Q lcfd send_exception (len) 417 Jan 30 10:44:28 Q lcfd Entering send_methstat Jan 30 10:44:28 Q lcfd Entering send_struct Jan 30 10:44:28 Q lcfd net_send of 475 bytes, session 348862477 Jan 30 10:44:28 Q lcfd Leaving send_struct Jan 30 10:44:28 Q lcfd Leaving send_methstat Jan 30 10:44:28 Q lcfd Entering Listener (running). Jan 30 10:44:28 Q lcfd Waiting for connection... Jan 30 10:44:28 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:44:28 Q lcfd cti_accept (timeout=-1) Jan 30 10:44:44 Q lcfd New connection from 144.19.3.150+2463 Jan 30 10:44:44 Q lcfd Checking for pending connections...before continuing Jan 30 10:44:45 Q lcfd No connections are pending Jan 30 10:44:45 2 lcfd Receive attempt 1 of 10 for data on network connection 144.19.3.150+2463 Jan 30 10:44:45 Q lcfd Entering net_recv, receive a message Jan 30 10:44:45 Q lcfd Leaving net_recv: bytes=215, (type=0 session=348862478) Jan 30 10:44:45 2 lcfd Data was successfully received Jan 30 10:44:45 2 lcfd CacheCheckExistence: Found: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe Jan 30 10:44:45 Q lcfd setting-up inherit fd. netfd=196 Jan 30 10:44:45 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe, ses: 14cb380e Jan 30 10:44:45 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user Tivoli_Admin. Jan 30 10:44:45 Q lcfd send_exception (len) 421 Jan 30 10:44:45 Q lcfd Entering send_methstat Jan 30 10:44:45 Q lcfd Entering send_struct Jan 30 10:44:45 Q lcfd net_send of 479 bytes, session 348862478 Jan 30 10:44:45 Q lcfd Leaving send_struct Jan 30 10:44:45 Q lcfd Leaving send_methstat Jan 30 10:44:45 Q lcfd Entering Listener (running). Jan 30 10:44:45 Q lcfd Waiting for connection... Jan 30 10:44:45 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:44:45 Q lcfd cti_accept (timeout=-1) Does someone have an idea? mfG / Greetings Alexander Thom - LVA Hessen - - PC-Management - Tel: +49 (0) 69 6052 2054 alexander.thom-7TXQga4RpyEUtdQbppsyvg@xxxxxxxxxxxxxxxx

Next Message by Thread: click to view message preview

Antwort: Re: spawn_impl .. another one

There's a simple question for me .. why is this only on this few machines ..? And all other are working without adding tmersrvd to Admin-Group? I think this will we a security-risk.. mfG Alexander Thom - LVA Hessen - - PC-Management - Tel: +49 (0) 69 6052 2054 alexander.thom-7TXQga4RpyEUtdQbppsyvg@xxxxxxxxxxxxxxxx |---------+----------------------------> | | rcerroji-F5PjSAPABEg@xxxxxxxxxxxxxxxx| | | nesto.es | | | Gesendet von: | | | owner-tme10-gDVLAvcG/0E@xxxxxxxxxxxxxxxx| | | .us.ibm.com | | | | | | | | | 30.01.2004 11:14 | | | Bitte antworten | | | an tme10 | |---------+----------------------------> >--------------------------------------------------------------------------------------------------------------------------------------------------| | | | An: tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx | | Kopie: | | Thema: Re: [tme10] spawn_impl .. another one | >--------------------------------------------------------------------------------------------------------------------------------------------------| Is possible what you have to add the user tmersrvd in the group Tivoli_admin_Privileges and Administrators, and if the workstation is in domain, add the user to Admin Domain too Regards alexander.thom-7TXQga4RpyEUtdQbppsyvg@xxxxxxxxxxxxxxxx Enviado por: Para: owner-tme10-XtjxT7Vmt5b1ENwx4SLHqw@xxxxxxxxxxxxxxxx tme10@xxxxxxxxxxxxxxxx cc: Asunto: [tme10] 30/01/2004 10:52 spawn_impl .. another one Por favor, responda a tme10 Hi List, i got a strange problem since a few days .. I created an Admin in my NT4 - Domain for installing Tivoli Endpoints. Now i'm installing Endpoints via winstlcf. After reboot the Endpoint, the Installation seemed to be ok. But then i test the Framework: / :> wadminep sip0 view_version Performing browse mode 'view_version' on endpoint 'sip0' EXCEPTION spawn_impl, could not spawn method as user tmersrvd. / :> wadminep sip0 reexec_lcfd Performing administrative mode 'reexec_lcfd' on endpoint 'sip0' EXCEPTION spawn_impl, could not spawn method as user Tivoli_Admin. / :> So i put loglevel 2 on it: Jan 30 10:41:04 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\TME\INVENTORY\inv_config_ep_meths.exe, ses: 14cb380c Jan 30 10:41:04 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user Tivoli_Admin. Jan 30 10:41:04 Q lcfd send_exception (len) 421 Jan 30 10:41:04 Q lcfd Entering send_methstat Jan 30 10:41:04 Q lcfd Entering send_struct Jan 30 10:41:04 Q lcfd net_send of 479 bytes, session 348862476 Jan 30 10:41:04 Q lcfd Leaving send_struct Jan 30 10:41:04 Q lcfd Leaving send_methstat Jan 30 10:41:04 Q lcfd Entering Listener (running). Jan 30 10:41:04 Q lcfd Waiting for connection... Jan 30 10:41:04 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:41:04 Q lcfd cti_accept (timeout=-1) Jan 30 10:44:27 Q lcfd New connection from 144.19.3.150+2462 Jan 30 10:44:27 Q lcfd Checking for pending connections...before continuing Jan 30 10:44:28 Q lcfd No connections are pending Jan 30 10:44:28 2 lcfd Receive attempt 1 of 10 for data on network connection 144.19.3.150+2462 Jan 30 10:44:28 Q lcfd Entering net_recv, receive a message Jan 30 10:44:28 Q lcfd Leaving net_recv: bytes=200, (type=0 session=348862477) Jan 30 10:44:28 2 lcfd Data was successfully received Jan 30 10:44:28 2 lcfd CacheCheckExistence: Found: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe Jan 30 10:44:28 Q lcfd setting-up inherit fd. netfd=148 Jan 30 10:44:28 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe, ses: 14cb380d Jan 30 10:44:28 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user tmersrvd. Jan 30 10:44:28 Q lcfd send_exception (len) 417 Jan 30 10:44:28 Q lcfd Entering send_methstat Jan 30 10:44:28 Q lcfd Entering send_struct Jan 30 10:44:28 Q lcfd net_send of 475 bytes, session 348862477 Jan 30 10:44:28 Q lcfd Leaving send_struct Jan 30 10:44:28 Q lcfd Leaving send_methstat Jan 30 10:44:28 Q lcfd Entering Listener (running). Jan 30 10:44:28 Q lcfd Waiting for connection... Jan 30 10:44:28 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:44:28 Q lcfd cti_accept (timeout=-1) Jan 30 10:44:44 Q lcfd New connection from 144.19.3.150+2463 Jan 30 10:44:44 Q lcfd Checking for pending connections...before continuing Jan 30 10:44:45 Q lcfd No connections are pending Jan 30 10:44:45 2 lcfd Receive attempt 1 of 10 for data on network connection 144.19.3.150+2463 Jan 30 10:44:45 Q lcfd Entering net_recv, receive a message Jan 30 10:44:45 Q lcfd Leaving net_recv: bytes=215, (type=0 session=348862478) Jan 30 10:44:45 2 lcfd Data was successfully received Jan 30 10:44:45 2 lcfd CacheCheckExistence: Found: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe Jan 30 10:44:45 Q lcfd setting-up inherit fd. netfd=196 Jan 30 10:44:45 1 lcfd Spawning: C:\tivoli\lcf\dat\1\cache\bin\w32-ix86\endpoint\admin.exe, ses: 14cb380e Jan 30 10:44:45 Q lcfd ** Exception caught in listener() (METH_START): spawn_impl, could not spawn method as user Tivoli_Admin. Jan 30 10:44:45 Q lcfd send_exception (len) 421 Jan 30 10:44:45 Q lcfd Entering send_methstat Jan 30 10:44:45 Q lcfd Entering send_struct Jan 30 10:44:45 Q lcfd net_send of 479 bytes, session 348862478 Jan 30 10:44:45 Q lcfd Leaving send_struct Jan 30 10:44:45 Q lcfd Leaving send_methstat Jan 30 10:44:45 Q lcfd Entering Listener (running). Jan 30 10:44:45 Q lcfd Waiting for connection... Jan 30 10:44:45 Q lcfd Entering net_wait_for_connection, timeout=-1 handle=0x425570 Jan 30 10:44:45 Q lcfd cti_accept (timeout=-1) Does someone have an idea? mfG / Greetings Alexander Thom - LVA Hessen - - PC-Management - Tel: +49 (0) 69 6052 2054 alexander.thom-7TXQga4RpyEUtdQbppsyvg@xxxxxxxxxxxxxxxx