Re: Help with configuration

The card is a Intersil Prism2.5  based card and as far as I can see
m0n0wall negotiates with it.
Im not sure how to change card from infrastructure to ad-hoc. I have
been running a regular AP before and the laptop has worked together
with that. Also, as said, I do see the network on my laptop, just cant
connect to it.

-Patrik

----- Original Message ----- 
From: "Robert Staph" <rstaph@xxxxxxxxxxxxxxxxxx>
To: <m0n0wall@xxxxxxxxxxxxx>
Sent: Thursday, August 12, 2004 8:46 PM
Subject: Re: [m0n0wall] Help with configuration


> If your laptop card is in "infrastructure" mode, change it to "ad-hoc"
(aka
> "peer-to-peer") mode and see if that works.  Or better yet, are you sure
its
> a Prism2 wireless card in the WRAP? (IIRC Prism2 is the only chipset that
> m0n0 can use as an AP in infrastructure).
>
> As far as DMZ not working without a LAN bridge it sounds like a firewall
> rules issue..  make sure that you allow each interface to talk to each
> other, as it is not specified by default.
>
> ie.
> Proto    Source    Port    Destination    Port    Description
> *    DMZ net    *    *    *    DMZ -> any
> *    *    *    DMZ net    *    any -> DMZ
>
> Plus if you want the services on the DMZ computer available to the outside
> you'll need to enter allow rules on the Firewall:Rules:WAN-Interface and
use
> port forwarding (NAT:Inbound) to get it to the right place.  (I even think
> there is a check box when you enter an item in NAT:Inbound that will
> automatically add the right firewall rule for you).
>
> -Rob
>
> ----- Original Message ----- 
> From: "Patrik" <paake@xxxxxxxxx>
> To: <m0n0wall@xxxxxxxxxxxxx>
> Sent: Thursday, August 12, 2004 2:22 PM
> Subject: Re: [m0n0wall] Help with configuration
>
>
> > Wrong of me, my laptop does not connect to the wireless network
> > but it do find it! Have tried with and without WEP.
> >
> >
> >
> >
> >> I have bridged LAN with OPT1 (DMZ) which is working together.
> >> Havent bridged WLAN with anything but the interface is up, the
> >> laptop does find my wireless network and do connect to it
> >> although I cant even ping or logon to m0n0wall...
> >>
> >> -Patrik
> >>
> >> ----- Original Message ----- 
> >> From: "Stefan Thuering" <stefan.thuering@xxxxxxxxxxx>
> >> To: <>
> >> Sent: Thursday, August 12, 2004 7:49 PM
> >> Subject: Re: [m0n0wall] Help with configuration
> >>
> >>
> >> > Hello Patrik
> >> >
> >> > I think you just have to copy the settings of the "Default LAN ->
any"
> >> > rule to the other interfaces. Bridging isn't required.
> >> >
> >> > Patrik wrote:
> >> > > to configure this? I would like every computer to communicate to
each
> >> other.
> >> >
> >> > ---------------------------------------------------------------------
> >> > To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> >> > For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
> >> >
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> >> For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
> >>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> > For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
>