Re: Help with configuration

If your laptop card is in "infrastructure" mode, change it to "ad-hoc" (aka 
"peer-to-peer") mode and see if that works.  Or better yet, are you sure its 
a Prism2 wireless card in the WRAP? (IIRC Prism2 is the only chipset that 
m0n0 can use as an AP in infrastructure).

As far as DMZ not working without a LAN bridge it sounds like a firewall 
rules issue..  make sure that you allow each interface to talk to each 
other, as it is not specified by default.

ie.
Proto    Source    Port    Destination    Port    Description
*    DMZ net    *    *    *    DMZ -> any
*    *    *    DMZ net    *    any -> DMZ

Plus if you want the services on the DMZ computer available to the outside 
you'll need to enter allow rules on the Firewall:Rules:WAN-Interface and use 
port forwarding (NAT:Inbound) to get it to the right place.  (I even think 
there is a check box when you enter an item in NAT:Inbound that will 
automatically add the right firewall rule for you).

-Rob

----- Original Message ----- 
From: "Patrik" <paake@xxxxxxxxx>
To: <m0n0wall@xxxxxxxxxxxxx>
Sent: Thursday, August 12, 2004 2:22 PM
Subject: Re: [m0n0wall] Help with configuration


> Wrong of me, my laptop does not connect to the wireless network
> but it do find it! Have tried with and without WEP.
>
>
>
>
> > I have bridged LAN with OPT1 (DMZ) which is working together.
> > Havent bridged WLAN with anything but the interface is up, the
> > laptop does find my wireless network and do connect to it
> > although I cant even ping or logon to m0n0wall...
> >
> > -Patrik
> >
> > ----- Original Message ----- 
> > From: "Stefan Thuering" <stefan.thuering@xxxxxxxxxxx>
> > To: <>
> > Sent: Thursday, August 12, 2004 7:49 PM
> > Subject: Re: [m0n0wall] Help with configuration
> >
> >
> > > Hello Patrik
> > >
> > > I think you just have to copy the settings of the "Default LAN -> any"
> > > rule to the other interfaces. Bridging isn't required.
> > >
> > > Patrik wrote:
> > > > to configure this? I would like every computer to communicate to each
> > other.
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> > > For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> > For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall-unsubscribe@xxxxxxxxxxxxx
> For additional commands, e-mail: m0n0wall-help@xxxxxxxxxxxxx