A clarification question: Are you going to merge the patch via the
linux-scsi tree, or should I try to get it merged via the linux-usb tree?
Matt
On Fri, Nov 14, 2003 at 06:13:12PM -0800, Patrick Mansfield wrote:
> I went ahead and tested the patch with a Sony / Sony DSC on my laptop with
> no problems.
>
> James, Matthew, etc. - are you OK with the patch?
>
> Here's usb storage debug output on attach of the device, note the lack of
> any MODE SENSE:
>
> Nov 14 18:01:47 laptop patman: NOTE attaching NOTE
> Nov 14 18:01:56 laptop kernel: usb-storage: USB Mass Storage device detected
> Nov 14 18:01:56 laptop kernel: usb-storage: act_altsetting is 0, id_index is
> 25
> Nov 14 18:01:56 laptop kernel: usb-storage: -- associate_dev
> Nov 14 18:01:56 laptop kernel: usb-storage: Vendor: Sony
> Nov 14 18:01:56 laptop kernel: usb-storage: Product:
> DSC-S30/S70/S75/505V/F505/F707/F717/P8
> Nov 14 18:01:56 laptop kernel: usb-storage: Transport: Control/Bulk
> Nov 14 18:01:56 laptop kernel: usb-storage: Protocol: Transparent SCSI
> Nov 14 18:01:56 laptop kernel: usb-storage: Endpoints: In: 0xca8bb280 Out:
> 0xca8bb294 Int: 0xca8bb2a8 (Period 255)
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:56 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:56 laptop kernel: usb-storage: Command INQUIRY (6 bytes)
> Nov 14 18:01:56 laptop kernel: usb-storage: 12 00 00 00 24 00
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 36 bytes
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 36/36
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:56 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- code: 0x70, key: 0x0, ASC:
> 0x0, ASCQ: 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: No Sense: No additional sense
> information
> Nov 14 18:01:56 laptop kernel: usb-storage: Fixing INQUIRY data to show SCSI
> rev 2 - was 0
> Nov 14 18:01:56 laptop kernel: usb-storage: scsi cmd done, result=0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:56 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:56 laptop kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
> Nov 14 18:01:56 laptop kernel: usb-storage: 00 00 00 00 00 00
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:56 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- code: 0x70, key: 0x0, ASC:
> 0x0, ASCQ: 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: No Sense: No additional sense
> information
> Nov 14 18:01:56 laptop kernel: usb-storage: scsi cmd done, result=0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:56 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:56 laptop kernel: usb-storage: Command READ_CAPACITY (10 bytes)
> Nov 14 18:01:56 laptop kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=10
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 10/10
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 8 bytes
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 8/8
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:56 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- code: 0x70, key: 0x0, ASC:
> 0x0, ASCQ: 0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: No Sense: No additional sense
> information
> Nov 14 18:01:56 laptop kernel: usb-storage: scsi cmd done, result=0x0
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:56 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:56 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:56 laptop kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
> Nov 14 18:01:56 laptop kernel: usb-storage: 00 00 00 00 00 00
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:56 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:56 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:56 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:56 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:56 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:56 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- code: 0x70, key: 0x0, ASC:
> 0x0, ASCQ: 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: No Sense: No additional sense
> information
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6
> bytes)
> Nov 14 18:01:57 laptop kernel: usb-storage: 1e 00 00 00 01 00
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code -32; transferred 6/6
> Nov 14 18:01:57 laptop kernel: usb-storage: -- stall on control pipe
> Nov 14 18:01:57 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 2
> Nov 14 18:01:57 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transport indicates command
> failure
> Nov 14 18:01:57 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- code: 0x70, key: 0x5, ASC:
> 0x20, ASCQ: 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: Illegal Request: Invalid command
> operation code
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x2
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Command READ_10 (10 bytes)
> Nov 14 18:01:57 laptop kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=10
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 10/10
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_bulk_transfer_sglist:
> xfer 4096 bytes, 1 entries
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred
> 4096/4096
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- CB transport device requiring
> auto-sense
> Nov 14 18:01:57 laptop kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_ctrl_transfer: rq=00
> rqtype=21 value=0000 index=00 len=6
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 6/6
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: Call to usb_stor_ctrl_transfer()
> returned 0
> Nov 14 18:01:57 laptop kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer
> 18 bytes
> Nov 14 18:01:57 laptop kernel: usb-storage: Status code 0; transferred 18/18
> Nov 14 18:01:57 laptop kernel: usb-storage: -- transfer complete
> Nov 14 18:01:57 laptop kernel: usb-storage: CB data stage result is 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- Result from auto-sense is 0
> Nov 14 18:01:57 laptop kernel: usb-storage: -- code: 0x70, key: 0x0, ASC:
> 0x0, ASCQ: 0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: No Sense: No additional sense
> information
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x0
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (1:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (2:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (3:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (4:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (5:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (6:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: usb-storage: queuecommand called
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread awakened.
> Nov 14 18:01:57 laptop kernel: usb-storage: Bad target number (7:0)
> Nov 14 18:01:57 laptop kernel: usb-storage: scsi cmd done, result=0x40000
> Nov 14 18:01:57 laptop kernel: usb-storage: *** thread sleeping.
> Nov 14 18:01:57 laptop kernel: WARNING: USB Mass Storage data integrity not
> assured
> Nov 14 18:01:57 laptop kernel: USB Mass Storage device found at 3
> Nov 14 18:02:11 laptop patman: NOTE attach COMPLETED NOTE
--
Matthew Dharm Home: mdharm-usb@xxxxxxxxxxxxxxxxxx
Maintainer, Linux USB Mass Storage Driver
It was a new hope.
-- Dust Puppy
User Friendly, 12/25/1998
pgpVYXwQLKa7t.pgp
Description: PGP signature
|
