Hello,
Looks like the RX section of the NIC is not working.
After pinging another box, does it add the remote box's
MAC address in the ARP table ?
I had similar problem with RH 7.1, do not remember which card it
was, I trashed it. It would respond only if I ping from its console.
After replacing the NIC with an intel 82557 based one, the computer
is still working fine.
RGDS
thomas
At 01:44 AM 11/23/2002, you wrote:
Hi there,
I'm running RH7.1 on x386. Just upgraded to 2.4.18-18.7.x using RHN. Reboot
process looked fine. After reboot the machine is not visible on the ethenet
network. I can ping localhost & the eth0 interface on 192.168.1.6 however,
cannot ping any other devices. eth0 seems ok. Watching the boot load process
all looks ok. Can access the web server locally etc - all seems fine
locally.
I'm using a NetGear FA311 (natsemi) card. PentiumPro200, 4Gb ide
drive...nothing fancy.
If I ping to another box I can see the leds for both boxes flashing, however
the ping response is "Destination Host Unreachable".
If I ping from another box I can't see the upgraded box's led respond.
Is there anybody out there who can point me in the right direction? Or
suggest where to start looking?
Many thanks,
Mark
--------------------------------------------
Thomas Joseph
Spectrum Software Solutions Inc.
1035 7th North Street,
Liverpool,
New York 13088
315-457-7700
|
