# HG changeset patch
# User agriffis@xxxxxxxxxxxxxxx
# Node ID 8bbf845cad0dc1774c348f036d4eaa0365aef7e9
# Parent 447ac07ef71dc6bb49376f5b0164823a8e8a38e0
Improve the test suite
- By default, run all the tests, regardless of architecture. Since the test
suite calls grubby and not the bootloaders themselves, there's no reason to
be selective.
- Add command-line parsing:
-b B --bootloader=B Test bootloader B instead of all
-h --help Show this help message
-v --verbose Verbose output
--version Show version information
- Run parse/write checks on all bootloaders instead of just grub and lilo
- Print statistics at the end of the run
- NB: These changes reveal that yaboot parsing has some issues. Additionally
the symlink test now returns failure, which wasn't being detected properly
before. So... current test results are:
112 (93%) tests passed, 8 (6%) tests failed
Signed-off-by: Aron Griffis <aron@xxxxxx>
test.sh | 308 ++++++++++++++++++++++++++++++++++------------------------------
1 file changed, 165 insertions(+), 143 deletions(-)
diff -r 447ac07ef71d -r 8bbf845cad0d grubby/test.sh
--- a/grubby/test.sh Fri Jun 23 09:01:37 2006 -0400
+++ b/grubby/test.sh Thu Jun 29 12:21:58 2006 -0400
@@ -1,132 +1,150 @@
#!/bin/bash
-
-ARCH=$(uname -m)
-
-elilotest=""
-lilotest=""
-grubtest=""
-zipltest=""
-yaboottest=""
-
-case "$ARCH" in
- i?86)
- lilotest="yes"
- grubtest="yes"
- ;;
- x86_64)
- lilotest="yes"
- grubtest="yes"
- ;;
- ppc*)
- yaboottest="yes"
- ;;
- s390*)
- zipltest="yes"
- ;;
- *)
- echo "Not running any tests for $ARCH"
- exit 0
-esac
-
-export MALLOC_CHECK_=2
-
-RESULT=0
-
-oneTest () {
- mode=$1
- cfg=test/$2
- correct=test/results/$3
- shift; shift; shift
- ./grubby $mode --bad-image-okay -c $cfg -o - "$@" | cmp $correct >
/dev/null
-
- if [ $? != 0 ]; then
+#
+# test.sh -- grubby regression tests
+#
+
+#----------------------------------------------------------------------
+# Global vars
+#----------------------------------------------------------------------
+
+read dum1 version dum2 <<<'$Revision: 0.0 $'
+cmd=${0##*/}
+opt_bootloader=*
+opt_verbose=false
+read -d '' usage <<EOT
+usage: test.sh [ -hv ]
+
+ -b B --bootloader=B Test bootloader B instead of all
+ -h --help Show this help message
+ -v --verbose Verbose output
+ --version Show version information
+EOT
+declare -i pass=0 fail=0
+testing=
+
+#----------------------------------------------------------------------
+# Functions
+#----------------------------------------------------------------------
+
+oneTest() {
+ typeset mode=$1 cfg=test/$2 correct=test/results/$3
+ shift 3
+
+ echo "$testing ... $mode $cfg $correct"
+ runme=( ./grubby "$mode" --bad-image-okay -c "$cfg" -o - "$@" )
+ if "${runme[@]}" | cmp "$correct" > /dev/null; then
+ (( pass++ ))
+ if $opt_verbose; then
+ echo -------------------------------------------------------------
+ echo -n "PASS: "
+ printf "%q " "${runme[@]}"; echo
+ "${runme[@]}" | diff -U30 "$cfg" -
+ echo
+ fi
+ else
+ (( fail++ ))
echo -------------------------------------------------------------
- echo FAILURE: $cfg $correct "$@"
- echo -n ./grubby $mode --bad-image-okay -c $cfg -o -
- for arg in "$@"; do
- echo -n " \"$arg\""
- done
- echo ""
- ./grubby $mode --bad-image-okay -c $cfg -o - "$@" | diff -u $correct -;
- RESULT=1
+ echo -n "FAIL: "
+ printf "%q " "${runme[@]}"; echo
+ "${runme[@]}" | diff -U30 "$correct" -
+ echo
fi
}
-liloTest() {
- if [ -z "$lilotest" ]; then echo "skipping LILO test" ; return; fi
- oneTest --lilo "$@"
-}
-
-eliloTest() {
- if [ -z "$elilotest" ]; then echo "skipping ELILO test" ; return; fi
- oneTest --elilo "$@"
-}
-
-grubTest() {
- if [ -z "$grubtest" ]; then echo "skipping GRUB test" ; return; fi
- oneTest --grub "$@"
-}
-
-yabootTest() {
- if [ -z "$yaboottest" ]; then echo "skipping YABOOT test" ; return; fi
- oneTest --yaboot "$@"
-}
-
-ziplTest() {
- if [ -z "$zipltest" ]; then echo "skipping Z/IPL test" ; return; fi
- oneTest --zipl "$@"
-}
-
-echo "Parse/write comparison..."
-for n in $(cd test; echo grub.[0-9]*); do
- grubTest $n ../$n --remove-kernel 1234
-done
-
-for n in $(cd test; echo lilo.[0-9]*); do
- liloTest $n ../$n --remove-kernel 1234
-done
-
-echo "Permission preservation..."
-cp test/grub.1 grub-test
-chmod 0614 grub-test
-touch -t 200301010101.00 grub-test
-time=$(ls -l grub-test | awk '{ print $6 " " $7 " "$8}')
-perm=$(ls -l grub-test | awk '{print $1}')
-./grubby --grub --add-kernel bar --title title -c grub-test
-newtime=$(ls -l grub-test | awk '{ print $6 " " $7 " "$8}')
-newperm=$(ls -l grub-test | awk '{print $1}')
-if [ "$time" == "$newtime" -o "$perm" != "$newperm" ]; then
- echo " failed ($perm $newperm)";
-fi
-rm -f grub-test
-
-cp test/lilo.1 lilo-test
-chmod 0614 lilo-test
-touch -t 200301010101.00 lilo-test
-time=$(ls -l lilo-test | awk '{ print $6 " " $7 " "$8}')
-perm=$(ls -l lilo-test | awk '{print $1}')
-./grubby --lilo --add-kernel bar --title title -c lilo-test
-newtime=$(ls -l lilo-test | awk '{ print $6 " " $7 " "$8}')
-newperm=$(ls -l lilo-test | awk '{print $1}')
-if [ "$time" == "$newtime" -o "$perm" != "$newperm" ]; then
- echo " failed ($perm $newperm)";
-fi
-rm -f lilo-test
-
-echo "Following symlinks..."
-cp test/grub.1 grub-test
-ln -s grub-test mytest
-./grubby --grub --add-kernel bar --title title -c mytest
-if [ ! -L mytest ]; then
- echo " failed (not a symlink)"
-fi
-target=$(ls -l mytest | awk '{ print $11 }')
-if [ "$target" != grub-test ]; then
- echo " failed (wrong target)"
-fi
-rm -f grub-test mytest
-
-echo "GRUB default directive..."
+# generate convenience functions
+for b in $(./grubby --help | \
+ sed -n 's/^.*--\([^ ]*\) *configure \1 bootloader$/\1/p'); do
+ eval "${b}Test() { [[ \"$b\" == \$opt_bootloader ]] && oneTest --$b
\"\$@\"; }"
+done
+
+#----------------------------------------------------------------------
+# Main
+#----------------------------------------------------------------------
+
+# Use /usr/bin/getopt which supports GNU-style long options
+args=$(getopt -o b:hv --long bootloader,help,verbose,version -n "$cmd" --
"$@") || exit
+eval set -- "$args"
+while true; do
+ case $1 in
+ -b|--bootloader) opt_bootloader=$2; shift 2 ;;
+ -h|--help) echo "$usage"; exit 0 ;;
+ -v|--verbose) opt_verbose=true; shift ;;
+ --version) echo "$cmd $version"; exit 0 ;;
+ --) shift; break ;;
+ *) echo "failed to process cmdline args" >&2; exit 1 ;;
+ esac
+done
+
+export MALLOC_CHECK_=2
+
+testing="Parse/write comparison"
+for n in test/*.[0-9]*; do
+ n=${n#*/} # remove test/
+ b=${n%.*} # remove suffix
+ [[ $b == $opt_bootloader ]] || continue
+ ${b}Test $n ../$n --remove-kernel 1234
+done
+
+testing="Permission preservation"
+unset b
+for n in test/*.[0-9]*; do
+ n=${n#*/} # remove test/
+ [[ ${n%.*} == "$b" ]] && continue
+ b=${n%.*} # remove suffix
+ [[ $b == $opt_bootloader ]] || continue
+
+ echo "$testing ... --$b"
+
+ cp test/$n ${b}-test
+ chmod 0614 ${b}-test
+ touch -t 200301010101.00 ${b}-test
+ time=$(ls -l ${b}-test | awk '{ print $6 " " $7 " "$8}')
+ perm=$(ls -l ${b}-test | awk '{print $1}')
+ ./grubby --${b} --add-kernel bar --title title -c ${b}-test
+ if [[ $? != 0 ]]; then
+ echo " FAIL (grubby returned non-zero)"
+ (( fail++ ))
+ elif newtime=$(ls -l ${b}-test | awk '{ print $6 " " $7 " "$8}') && \
+ newperm=$(ls -l ${b}-test | awk '{print $1}') && \
+ [[ $time == "$newtime" || $perm != "$newperm" ]]
+ then
+ echo " FAIL ($perm $newperm)";
+ (( fail++ ))
+ else
+ (( pass++ ))
+ fi
+ rm -f ${b}-test
+done
+
+testing="Following symlinks"
+unset b
+for n in test/*.[0-9]*; do
+ n=${n#*/} # remove test/
+ [[ ${n%.*} == "$b" ]] && continue
+ b=${n%.*} # remove suffix
+ [[ $b == $opt_bootloader ]] || continue
+
+ echo "$testing ... --$b"
+
+ cp test/${b}.1 ${b}-test
+ ln -s ${b}-test mytest
+ ./grubby --${b} --add-kernel bar --title title -c mytest
+ if [[ $? != 0 ]]; then
+ echo " failed (grubby returned non-zero)"
+ (( fail++ ))
+ elif [[ ! -L mytest ]]; then
+ echo " failed (not a symlink)"
+ (( fail++ ))
+ elif target=$(readlink mytest) && [[ $target != "${b}-test" ]]; then
+ echo " failed (wrong target)"
+ (( fail++ ))
+ else
+ (( pass++ ))
+ fi
+ rm -f ${b}-test mytest
+done
+
+testing="GRUB default directive"
grubTest grub.1 default/g1.1 --boot-filesystem=/boot --add-kernel
/boot/new-kernel --title Some_Title
grubTest grub.1 default/g1.2 --boot-filesystem=/boot --add-kernel
/boot/new-kernel --title Some_Title --make-default
grubTest grub.3 default/g3.1 --boot-filesystem=/boot
--set-default=/boot/vmlinuz-2.4.7-2
@@ -135,7 +153,7 @@ grubTest grub.4 default/g4.2 --boot-file
grubTest grub.4 default/g4.2 --boot-filesystem=/
--set-default=/boot/vmlinuz-2.4.7-ac3 --remove-kernel /boot/vmlinuz-2.4.7-2.5
--add-kernel=/boot/new-kernel --copy-default --title New_Title
grubTest grub.6 default/g6.1 --remove-kernel=/boot/vmlinuz-2.4.7-2.9
--boot-filesystem=/
-echo "LILO default directive..."
+testing="LILO default directive"
liloTest lilo.1 default/l1.1 --set-default=/boot/vmlinuz-2.4.18-4
liloTest lilo.1 default/l1.2 --remove-kernel=/boot/vmlinuz-2.4.18-4smp
liloTest lilo.1 default/l1.3 --add-kernel /boot/kernel --title label \
@@ -143,11 +161,11 @@ liloTest lilo.1 default/l1.4 --add-kerne
liloTest lilo.1 default/l1.4 --add-kernel /boot/kernel --title label \
--copy-default --make-default
-echo "Z/IPL default directive..."
+testing="Z/IPL default directive"
ziplTest zipl.1 default/z1.1 --add-kernel /boot/new-kernel --title test
ziplTest zipl.1 default/z1.2 --add-kernel /boot/new-kernel --title test
--make-default
-echo "GRUB fallback directive..."
+testing="GRUB fallback directive"
grubTest grub.5 fallback/g5.1 --remove-kernel=/boot/vmlinuz-2.4.7-ac3 \
--boot-filesystem=/
grubTest grub.5 fallback/g5.2 --remove-kernel=/boot/vmlinuz-2.4.7-2.5 \
@@ -156,13 +174,13 @@ grubTest grub.5 fallback/g5.3 --remove-k
--boot-filesystem=/ --copy-default --add-kernel=/boot/new-kernel \
--title="Some_Title"
-echo "GRUB new kernel argument handling..."
+testing="GRUB new kernel argument handling"
grubTest grub.1 args/g1.1 --boot-filesystem=/boot \
--add-kernel=/boot/foo --title=some_title --args="1234" --copy-default
grubTest grub.1 args/g1.2 --boot-filesystem=/boot \
--add-kernel=/boot/foo --title=some_title --args="1234"
-echo "GRUB remove kernel..."
+testing="GRUB remove kernel"
grubTest grub.7 remove/g7.1 --boot-filesystem=/ \
--remove-kernel=/boot/vmlinuz-2.4.7-2.5
grubTest grub.3 remove/g3.1 --boot-filesystem=/ \
@@ -170,16 +188,16 @@ grubTest grub.9 remove/g9.1 --boot-files
grubTest grub.9 remove/g9.1 --boot-filesystem=/boot \
--remove-kernel=/boot/vmlinuz-2.4.7-2
-echo "YABOOT remove kernel..."
+testing="YABOOT remove kernel"
yabootTest yaboot.1 remove/y1.1 --boot-filesystem=/ --remove-kernel=DEFAULT
yabootTest yaboot.1 remove/y1.2 --boot-filesystem=/
--remove-kernel=/boot/vmlinuz-2.5.50-eepro
yabootTest yaboot.2 remove/y2.1 --boot-filesystem=/
--remove-kernel=/boot/vmlinux-2.5.50
-echo "Z/IPL remove kernel..."
+testing="Z/IPL remove kernel"
ziplTest zipl.1 remove/z1.1 --remove-kernel=/boot/vmlinuz-2.4.9-38
ziplTest zipl.1 remove/z1.2 --remove-kernel=DEFAULT
-echo "GRUB update kernel argument handling..."
+testing="GRUB update kernel argument handling"
grubTest grub.1 updargs/g1.1 --update-kernel=DEFAULT --args="root=/dev/hda1"
grubTest grub.1 updargs/g1.2 --update-kernel=DEFAULT \
--args="root=/dev/hda1 hda=ide-scsi root=/dev/hda2"
@@ -209,7 +227,7 @@ grubTest grub.11 updargs/g11.2 --boot-fi
--update-kernel=/vmlinuz-2.4.7-2smp \
--args "ro root=LABEL=/ single"
-echo "LILO update kernel argument handling..."
+testing="LILO update kernel argument handling"
liloTest lilo.1 updargs/l1.1 --update-kernel=/boot/vmlinuz-2.4.18-4 \
--args="root=/dev/md1"
liloTest lilo.1 updargs/l1.2 --update-kernel=/boot/vmlinuz-2.4.18-4smp \
@@ -223,7 +241,7 @@ liloTest lilo.3 updargs/l3.2 --update-ke
liloTest lilo.3 updargs/l3.2 --update-kernel=ALL \
--remove-args="single" --args "root=/dev/hda2"
-echo "LILO add kernel..."
+testing="LILO add kernel"
liloTest lilo.4 add/l4.1 --add-kernel=/boot/new-kernel.img --title="title" \
--copy-default --boot-filesystem=/boot
liloTest lilo.4 add/l4.2 --add-kernel=/boot/new-kernel.img --title="linux" \
@@ -238,7 +256,7 @@ liloTest lilo.6 add/l6.2 --add-kernel=/b
--initrd=/boot/new-initrd --copy-default --boot-filesystem=/boot
--remove-kernel "TITLE=linux"
-echo "GRUB add kernel..."
+testing="GRUB add kernel"
grubTest grub.1 add/g1.1 --add-kernel=/boot/new-kernel.img --title='title' \
--initrd=/boot/new-initrd --boot-filesystem=/
grubTest grub.1 add/g1.2 --add-kernel=/boot/new-kernel.img --title='title' \
@@ -260,19 +278,19 @@ grubTest grub.11 add/g11.1 --add-kernel=
--initrd=/boot/new-initrd --boot-filesystem=/boot --copy-default \
--args='console=tty0 console=ttyS1,9600n81 single'
-echo "YABOOT add kernel..."
+testing="YABOOT add kernel"
yabootTest yaboot.1 add/y1.1 --copy-default --boot-filesystem=/
--add-kernel=/boot/new-kernel \
--title=newtitle
yabootTest yaboot.1 add/y1.2 --add-kernel=/boot/new-kernel --boot-filesystem=/
--title=newtitle
-echo "YABOOT empty label..."
+testing="YABOOT empty label"
yabootTest yaboot.3 add/y3.1 --add-kernel=/boot/new-kernel --boot-filesystem=/
--title=newtitle
-echo "Z/IPL add kernel..."
+testing="Z/IPL add kernel"
ziplTest zipl.1 add/z1.1 --add-kernel=/boot/new-kernel.img --title test
ziplTest zipl.1 add/z1.2 --add-kernel=/boot/new-kernel.img --title test
--copy-default
-echo "LILO long titles..."
+testing="LILO long titles"
liloTest lilo.1 longtitle/l1.1 --add-kernel=/boot/new-kernel.img \
--title="linux-longtitle" --copy-default --boot-filesystem=/boot
liloTest lilo.1 longtitle/l1.2 --add-kernel=/boot/new-kernel.img \
@@ -280,11 +298,11 @@ liloTest lilo.7 longtitle/l7.1 --add-ker
liloTest lilo.7 longtitle/l7.1 --add-kernel=/boot/new-kernel.img \
--title="linux-longtitle-fix" --copy-default --boot-filesystem=/boot
-echo "ELILO long titles..."
+testing="ELILO long titles"
eliloTest lilo.7 longtitle/e7.1 --add-kernel=/boot/new-kernel.img \
--title="linux-longtitle-fix" --copy-default --boot-filesystem=/boot
-echo "GRUB add multiboot..."
+testing="GRUB add multiboot"
grubTest grub.1 multiboot/g1.1 --add-multiboot=/boot/xen.gz \
--add-kernel=/boot/vmlinuz-2.6.10-1.1088_FC4 --boot-filesystem=/boot \
--initrd=/boot/initrd-2.6.10-1.1088_FC4.img --title foo \
@@ -308,7 +326,7 @@ grubTest grub.10 multiboot/g10.4 --add-k
--initrd=/boot/initrd-2.6.10-1.1088_FC4.img --title foo \
--boot-filesystem=/boot
-echo "GRUB remove multiboot..."
+testing="GRUB remove multiboot"
grubTest grub.10 multiboot/g10.5 --boot-filesystem=/boot \
--remove-kernel=/boot/vmlinuz-2.6.10-1.1076_FC4
grubTest grub.10 multiboot/g10.6 --boot-filesystem=/boot \
@@ -316,4 +334,8 @@ grubTest grub.10 multiboot/g10.7 --boot-
grubTest grub.10 multiboot/g10.7 --boot-filesystem=/boot \
--remove-multiboot=/boot/xen.gz
-exit $RESULT
+printf "\n%d (%d%%) tests passed, %d (%d%%) tests failed\n" \
+ $pass $(((100*pass)/(pass+fail))) \
+ $fail $(((100*fail)/(pass+fail)))
+
+exit $(( !!fail ))
|
