buildbot-0.6.5 released

buildbot-0.6.5 is now available on the sf.net download site, reachable from
http://buildbot.sourceforge.net/ as usual. It is signed with my GPG key
(0x1514A7BD), and the md5/sha1 checksums are as follows:

  md5: 6ee6eddc2c8e6b3a076f79b806a8d3b4  buildbot-0.6.5.tar.gz
 sha1: 2e38f302b0a9e681b3410b97b3fe0bf2959d49e3  buildbot-0.6.5.tar.gz

0.6.5 is a minor feature release. The most significant addition is that very
large (>100MB) log files are handled *much* more efficiently: spooled
directly to and from disk without holding the entire contents in memory
first. This drastically reduces the memory consumption of the buildmaster for
projects with sizeable logs. The other big feature is that mktap has been
abandoned in favor of ".tac" files, simplifying the installation and startup
process. The "buildbot" front-end tool now handles all aspects of creating
and launching the daemons. All documentation was converted into .texinfo
format, and a decent chunk of the User's Manual has been written.

When upgrading from previous versions, you will need to use the 'buildbot
master' or 'buildbot slave' tool to populate the daemon's base directory,
because the older .tap files are no longer used. Just use 'buildbot' as if
you were creating your installation for the first time. Note that a
'Makefile' in the base directory is no longer used nor installed: 'buildbot
start' now looks for a 'Makefile.buildbot' to override the usual startup
process, and the installation leaves an inactive 'Makefile.sample' in that
directory for you to look at.

Likewise, if you are installing for the first time, after doing 'buildbot
master BASEDIR', you must copy the sample configuration file to 'master.cfg'
and edit it to suit your purposes.

Finally, the change to LogFile processing means that the log contents are now
stored on disk in separate files from the enclosing Build. Old Builds will be
converted on demand as they are loaded (non-destructively, so if you go back
to 0.6.4 for some reason, you won't lose your build history). This can take a
while, especially for large logs, so don't be surprised if your first look at
the Waterfall page in a buildmaster that's been upgraded to 0.6.5 appears to
stall for a while. Before being concerned that the buildmaster is stuck, look
in the master-side Builder directories to watch the log files being
populated.


Complete release notes are attached below. As usual, please direct all bugs
and questions to the buildbot-devel mailing list.

Have a log(N) day,
 -Brian


* Release 0.6.5 (18 May 2005)

** deprecated config keys removed

The 'webPortnum', 'webPathname', 'irc', and 'manholePort' config-file keys,
which were deprecated in the previous release, have now been removed. In
addition, Builders must now always be configured with dictionaries: the
support for configuring them with tuples has been removed.

** master/slave creation and startup changed

The buildbot no longer uses .tap files to store serialized representations of
the buildmaster/buildslave applications. Instead, this release now uses .tac
files, which are human-readable scripts that create new instances (rather
than .tap files, which were pickles of pre-created instances). 'mktap
buildbot' is gone.

You will need to update your buildbot directories to handle this. The
procedure is the same as creating a new buildmaster or buildslave: use
'buildbot master BASEDIR' or 'buildbot slave BASEDIR ARGS..'. This will
create a 'buildbot.tac' file in the target directory. The 'buildbot start
BASEDIR' will use twistd to start the application.

The 'buildbot start' command now looks for a Makefile.buildbot, and if it
finds one (and /usr/bin/make exists), it will use it to start the application
instead of calling twistd directly. This allows you to customize startup,
perhaps by adding environment variables. The setup commands create a sample
file in Makefile.sample, but you must copy this to Makefile.buildbot to
actually use it. The previous release looked for a bare 'Makefile', and also
installed a 'Makefile', so you were always using the customized approach,
even if you didn't ask for it. That old Makefile launched the .tap file, so
changing names was also necessary to make sure that the new 'buildbot start'
doesn't try to run the old .tap file.

'buildbot stop' now uses os.kill instead of spawning an external process,
making it more likely to work under windows. It waits up to 5 seconds for the
daemon to go away, so you can now do 'buildbot stop BASEDIR; buildbot start
BASEDIR' with less risk of launching the new daemon before the old one has
fully shut down. Likewise, 'buildbot start' imports twistd's internals
directly instead of spawning an external copy, so it should work better under
windows.

** new documentation

All of the old Lore-based documents were converted into a new Texinfo-format
manual, and considerable new text was added to describe the installation
process. The docs are not yet complete, but they're slowly shaping up to form
a proper user's manual.

** new features

Arch checkouts can now use precise revision stamps instead of always using
the latest revision. A separate Source step for using Bazaar (an alternative
Arch client) instead of 'tla' was added. A Source step for Cogito (the new
linux kernel VC system) was contributed by Brandon Philips. All Source steps
now accept a retry= argument to indicate that failing VC checkouts should be
retried a few times (SF#1200395), note that this requires an updated
buildslave.

The 'buildbot sendchange' command was added, to be used in VC hook scripts to
send changes at a pb.PBChangeSource . contrib/arch_buildbot.py was added to
use this tool; it should be installed using the 'Arch meta hook' scheme.

Changes can now accept a branch= parameter, and Builders have an
isBranchImportant() test that acts like isFileImportant(). Thanks to Thomas
Vander Stichele. Note: I renamed his tag= to branch=, in anticipation of an
upcoming feature to build specific branches. "tag" seemed too CVS-centric.

LogFiles have been rewritten to stream the incoming data directly to disk
rather than keeping a copy in memory all the time (SF#1200392). This
drastically reduces the buildmaster's memory requirements and makes 100MB+
log files feasible. The log files are stored next to the serialized Builds,
in files like BASEDIR/builder-dir/12-log-compile-output, so you'll want a
cron job to delete old ones just like you do with old Builds. Old-style
Builds from 0.6.4 and earlier are converted when they are first read, so the
first load of the Waterfall display after updating to this release may take
quite some time.

** build process updates

BuildSteps can now return a status of EXCEPTION, which terminates the build
right away. This allows exceptions to be caught right away, but still make
sure the build stops quickly.

** bug fixes

Some more windows incompatibilities were fixed. The test suite now has two
failing tests remaining, both of which appear to be Twisted issues that
should not affect normal operation.

The test suite no longer raises any deprecation warnings when run against
twisted-2.0 (except for the ones which come from Twisted itself).



-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click