Hello!
And I don't see "Pressed Power to flash" until I plug off CF card.
What kind of CF do you have?
Please send me WinCE HTC if you have. I have lost my own.
2006/3/21, Philipp H. Mohr <phm4-eQnPN5D1UZ61Qrn1Bg8BZw@xxxxxxxxxxxxxxxx>:
> Hi Andrey,
>
> > Please tell exect sequense what you did to install LAB.
>
> I followed the wiki:
>
> http://handhelds.org/~mreimer/zImage-LAB-20060222.htc
> dd if=zImage-LAB-20060222.htc of=/dev/sdb
>
> Then I went into the rescue bootloader and "Pressed Power to flash".
>
> Then I pressed reset and lab booted.
>
> hth,
> Phil
>
> > 2006/3/21, Philipp H. Mohr <phm4-eQnPN5D1UZ61Qrn1Bg8BZw@xxxxxxxxxxxxxxxx>:
> > > Hello,
> > >
> > > I have two h2200 and have first installed LAB and Linux (in flash on the
> > > pda) on one of my h2200s and it is working great. Then I tryed to do
> > > exactly the same for the other one, but I encounter a strange problem with
> > > LAB. I installed zImage-LAB-20060222.htc and after the first restart of
> > > LAB it loads and boot's linux, but when I shut down linux and restart lab
> > > I get the following error msg:
> > >
> > > Uncompressing Linux................................
> > >
> > > invalid compressed format (err=2)
> > >
> > > -- System halted
> > >
> > >
> > > I can reflash lab and it again only works once, even if I haven't booted
> > > into linux and have just pressed the reset button.
> > >
> > > It would be great if you guys could help me.
> > >
> > > Cheers,
> > > Phil
>
--
WBR,
Andrey "Shaman007" Bondarenko
http://digitalhardcore.us
|
