ports.arm.general (thread)

How setup the baud rate of serial port when i make the uclinux-dist-xxxx, zhang yan
RE: Compiler Options -- currently getting 'invalid instruction er ror', Keith Williams
Compiler Options -- currently getting 'invalid instruction error', Keith Williams
- Re: Compiler Options -- currently getting 'invalid instruction error', Steve Watt
Wireless LAN SD Card, Justin Pashley
boot error message for kernel-2.6.6 for SA-11x0 achitechture, Rčgá
pcmcia wireless card for at91rm9200, zxk
bootldr error message when erasing flash in neponset, Mildred Frisco
- Re: bootldr error message when erasing flash in neponset, Jamey Hicks
- bootldr error message when erasing flash in neponset, Mildred Frisco
used percent in "df" command, w h
- RE: used percent in "df" command, Kent Forschmiedt
- RE: used percent in "df" command, w h
Unable to handle kernel NULL pointer dereference at virtual address 00000000, Munro Biswal
- Re: Unable to handle kernel NULL pointer dereference at virtual address 00000000, Rolf F.
accessing bktree, himba
- Re: accessing bktree, Russell King - ARM Linux
  - Re: accessing bktree, himba
- Re: accessing bktree, Chris Gorman
xkb keys not mapped properly, Chris Gorman
Pppd for arm Linux, Shen, Ling
- Re: Pppd for arm Linux, Igor Trevisan
FP Errors in Custom x86 -> ARM9 Toolchain, Rick Woodring
- Re: FP Errors in Custom x86 -> ARM9 Toolchain, Dimitry Andric
- RE: FP Errors in Custom x86 -> ARM9 Toolchain, Rick Woodring
Re: Arm cross gcc-3.4.0, glibc-2.3.2, binutils-1.1[45] build failure., Dimitry Andric
Crypto driver query., vijaykc
Input wanted!, Matt Pennington
sti ( ) ?, mrasi
- Re: sti ( ) ?, Javier Álvarez
- RE: sti ( ) ?, Imre.Deak
Cross compiling XFree86 for arm, priya
- Re: Cross compiling XFree86 for arm, Guennadi Liakhovetski
- Re: Cross compiling XFree86 for arm, himba
- Cross compiling XFree86 for arm, priya
cross-compiling apache for arm.., siddartha gundeti
- Re: cross-compiling apache for arm.., Michal Raviv
  - Re: cross-compiling apache for arm.., Catalin Marinas
how-to make bootable jffs2 image for iPAQ 3600, Rega Lnx
- Re: how-to make bootable jffs2 image for iPAQ 3600, Javier Álvarez
Kernel Panic :VFS unable to mount fs at 01:00, sanjeev ramachandran
How to Make BootStrap Image for iPAQ H3600, Ravz Khantu
- Re: How to Make BootStrap Image for iPAQ H3600, Michael Opdenacker
- Re: How to Make BootStrap Image for iPAQ H3600, Michael 'Mickey' Lauer
question about I2C, xuhaoz
- Re: question about I2C, George G. Davis
Re: Linux-arm Digest, Vol 11, Issue 26, poineer
gcj & floating point, Jari Korva
- Re: gcj & floating point, Nicolas Pitre
  - Re: gcj & floating point, Jari Korva
U-Boot installation?, Devraj Mukherjee
- Re: U-Boot installation?, Pwu
- Re: U-Boot installation?, Marc Singer
SA-11X0 Instruction Set required, Ravz Khantu
- Re: SA-11X0 Instruction Set required, George G. Davis
Sharp LH7A400 LPD7A400 Ethernet not working?, Arnold Liu
- Re: Sharp LH7A400 LPD7A400 Ethernet not working?, Marc Singer
- Sharp LH7A400 LPD7A400 Ethernet not working?, Arnold Liu
- RE: Sharp LH7A400 LPD7A400 Ethernet not working?, Arnold Liu
- Sharp LH7A400 LPD7A400 Ethernet not working?, Arnold Liu
  - Re: Sharp LH7A400 LPD7A400 Ethernet not working?, Marc Singer
Floating Point questions !, Manfred Gruber
- Re: Floating Point questions !, Nicolas Pitre
  - Re: Floating Point questions !, Manfred Gruber
    - Re: Floating Point questions !, Nicolas Pitre
    - Re: Floating Point questions !, Manfred Gruber
    - Re: Floating Point questions !, Nicolas Pitre
- Re: Floating Point questions !, Scott Bambrough
framebuffer & tv out, Rhea Santos
- Re: framebuffer & tv out, Rhea Santos
- framebuffer & tv out, Rhea Santos
Sharp LH7A400 Cross tool, Devraj Mukherjee
- Re: Sharp LH7A400 Cross tool, Marc Singer
bootloader for neponset, Mildred Frisco
Kegel's scripts for building cross compilers, Devraj Mukherjee
- Re: Kegel's scripts for building cross compilers, Wouter van Heyst
Linux software selection, Amy Yap Hai Sin
- Re: Linux software selection, Carlos Manuel Duclos Vergara
  - Re: Linux software selection, Amy Yap Hai Sin
Ramdisk compressed data limits, dpetrini
- Re: Ramdisk compressed data limits, Michal Raviv
- Re: Ramdisk compressed data limits, Michal Raviv
Kernel Compile Error: use of old and new-style options to set FPU type, Marc Britten
- Re: Kernel Compile Error: use of old and new-style options to set FPU type, Dimitry Andric
  - Re: Kernel Compile Error: use of old and new-style options to set FPU type, Marc Britten
Re: RiscPC Debian woody install problems, Richard Earnshaw
Inexpensive development platform, Jeff Bronte
- Re: Inexpensive development platform, Cliff Brake
- Re: Inexpensive development platform, Marc Singer
- Re: Inexpensive development platform, Peter Naulls
Weird Compiler Error, Scott Rubin
- Re: Weird Compiler Error, Ralph Siemsen
- Re: Weird Compiler Error, Ralph Siemsen
  - Re: Weird Compiler Error, David Meggy
    - Re: Weird Compiler Error, Ralph Siemsen
    - Re: Weird Compiler Error, Javier Álvarez
- Re: Weird Compiler Error, Philip Blundell
- Re: Weird Compiler Error, Ian Campbell
- Re: Weird Compiler Error, srubin
  - Re: Weird Compiler Error, Wouter van Heyst
  - Re: Weird Compiler Error, Philip Blundell
porting from ADS1.2 to ARM-GCC-Linux, sumit thatte
- Re: porting from ADS1.2 to ARM-GCC-Linux, Erik Mouw
- Re: porting from ADS1.2 to ARM-GCC-Linux, Philip Blundell
netdevice timeout crash., vijaykc
- RE: netdevice timeout crash., Ranslam, Robert E
port linux-2.6 to custom board, himba
- Re: port linux-2.6 to custom board, Javier Álvarez
Russell, does pending lh7a40x serial patch need help?, Marc Singer
Mtd and jffs2 problem, w h
- Re: Mtd and jffs2 problem, Deepak Saxena
- Re: Mtd and jffs2 problem, Eric BENARD / Free
  - Re: Mtd and jffs2 problem, jassi brar
- Re: Mtd and jffs2 problem, w h
  - Re: Mtd and jffs2 problem, jassi brar
  - Re: Mtd and jffs2 problem, Michal Raviv
Can't create a directory in jffs (on SyncFlash), w h
linux-arm, w h
- Re: linux-arm, Marc Singer
where can I get the manual of arm-linux-gcc?, zhang yan
- Re: where can I get the manual of arm-linux-gcc?, Erik Mouw
RE: how to display images or video on tv through the I2C bus on assabet, Pihet-XID, Jean
how to display images or video on tv through the I2C bus on assabet, Mildred Frisco
how to enable I2C adapter for assabet on 2.6.6 kernel, Mildred Frisco
- Re: how to enable I2C adapter for assabet on 2.6.6 kernel, Mildred Frisco
ANNOUNCE: linux-arm-toolchain mailing list and standard toolchain project, Wouter van Heyst
- Re: ANNOUNCE: linux-arm-toolchain mailing list and standard toolchain project, Jamey Hicks
Acorn SparkFS Archives, Richard Jacobs
- Re: Acorn SparkFS Archives, Peter Naulls
Mailing List FAQ, Russell King - ARM Linux
- Mailing List FAQ, Russell King - ARM Linux
- Mailing List FAQ, Russell King - ARM Linux
- Mailing List FAQ, Russell King - ARM Linux
Mailing List Etiquette, Russell King - ARM Linux
- Mailing List Etiquette, Russell King - ARM Linux
- Mailing List Etiquette, Russell King - ARM Linux
- Mailing List Etiquette, Russell King - ARM Linux
Kernel 2.6.6 for SMDK2410 Compilation Problem, Simon Chow
how to port uClinux to my Board AT91M40800, peng
I2C adapter problem, xuhaoz
- Re: I2C adapter problem, Erik Mouw
- Re: I2C adapter problem, Duane Ellis
How do we use printascii (DEBUG_LL) after memtable_init ()?, Marc Singer
- Re: How do we use printascii (DEBUG_LL) after memtable_init ()?, Marc Singer
Serial Console Problem 2.4.19-rmk6-ds1 for ixp425, Annamalai Prakash
- RE: Serial Console Problem 2.4.19-rmk6-ds1 for ixp425, Ranslam, Robert E
Problem on booting linux from ixp1200, eddie wong
OpenOffice Porting Issues, Peter Naulls
- Re: OpenOffice Porting Issues, David Meggy
  - Re: OpenOffice Porting Issues, Peter Naulls
No init found on initrd mounted filesystem, Antonios Fornaro
- Re: No init found on initrd mounted filesystem, Christopher Curtis
  - Re: No init found on initrd mounted filesystem, Antonios Fornaro
    - Re: No init found on initrd mounted filesystem, Christopher Curtis
    - Re: No init found on initrd mounted filesystem, Antonios Fornaro
    - Re: No init found on initrd mounted filesystem, Erik Mouw
    - Re: No init found on initrd mounted filesystem, Russell King - ARM Linux
    - Re: No init found on initrd mounted filesystem, Antonios Fornaro
    - Re: No init found on initrd mounted filesystem, Russell King - ARM Linux
    - Re: No init found on initrd mounted filesystem, Antonios Fornaro
  - Re: No init found on initrd mounted filesystem, Antonios Fornaro
    - Re: No init found on initrd mounted filesystem, Erik Mouw
Re: still compile error (Erik Mouw), 代子为
- Re: still compile error (Erik Mouw), Erik Mouw
Updated LH7a40x patches for 2.6.7-rc2, Marc Singer
IDE_ARM and new platforms, Marc Singer
Problem in Serial Console., Annamalai Prakash
Patch for OKI ML674001, Mohan V
EDP9315 Flash configuration, Manfred Gruber
(No Subject), eddie wong
- (no subject), jose.alberto
Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Annamalai Prakash
- Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Russell King - ARM Linux
  - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Wolfgang Denk
    - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Erik Mouw
    - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Russell King - ARM Linux
- Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Lutz Jaenicke
- Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Annamalai Prakash
  - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Erik Mouw
    - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Annamalai Prakash
    - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Erik Mouw
    - Re: Loading Ramdisk from flash to RAM patch (2.4.19-rmk7)., Wolfgang Denk
Taglist not found and bad configuration page., XCH
- Re: Taglist not found and bad configuration page., Erik Mouw
  - Re: Taglist not found and bad configuration page., XCH
    - Re: Taglist not found and bad configuration page., Russell King - ARM Linux
    - Re: Taglist not found and bad configuration page., Vincent Sanders
    - Re: Taglist not found and bad configuration page., XCH
Driver implementation question, Derek Jones
- Re: Driver implementation question, Marc Singer
  - Message not available
    - Re: Driver implementation question, Marc Singer
- Re: Driver implementation question, George G. Davis
- Re: Driver implementation question, Andrew Victor
linux and the at91rm9200, Brock Denson
- Re: linux and the at91rm9200, Erik Mouw
  - Re: linux and the at91rm9200, Andrew Victor
Tick system timer, timex.h, HZ, and other tick related macros, cyril . franconie
- Re: Tick system timer, timex.h, HZ, and other tick related macros, Russell King - ARM Linux
  - Re: Tick system timer, timex.h, HZ, and other tick related macros, cyril . franconie
MMC mount problem, mrasi
Anyone succeed with U-boot+2.4.19-rmk7-ds1+RAMDISK+ixp425, Annamalai Prakash
ARM cores and ARM architectures, Curt Brune
UART Hook Point, Amit.Srivastava
Penguin.bin image format?, Justin Pashley
- Re: Penguin.bin image format?, Ralph Siemsen
- Re: Penguin.bin image format?, Erik Mouw
where to get kernel 2.6 for IXP425, madhusudhan.gowda
- Re: where to get kernel 2.6 for IXP425, Michal Raviv
Cirrus Logic EDB9301 problems, Stephen Beaver
- Re: Cirrus Logic EDB9301 problems, NGB
how to mount root FS directly from flash w/o ramdisk?, Simon Wong
- Re: how to mount root FS directly from flash w/o ramdisk?, Erik Mouw
  - Re: how to mount root FS directly from flash w/o ramdisk?, Paul Chitescu
  - Re: how to mount root FS directly from flash w/o ramdisk?, Simon Wong
    - Re: how to mount root FS directly from flash w/o ramdisk?, Paul Chitescu
    - Re: how to mount root FS directly from flash w/o ramdisk?, Erik Mouw
Re: still compile error, Erik Mouw
- Re: still compile error, 代子为
- Re: still compile error, Erik Mouw
2.4.19-rmk7-ds1+JFFS and U-Boot., Annamalai Prakash
- Re: [U-Boot-Users] 2.4.19-rmk7-ds1+JFFS and U-Boot., Wolfgang Denk
Re: RiscPC bootloader, Stuart Winter
- Re: RiscPC bootloader, Rien Mertens