FW: CDRECORD w/ out SCSI

> -----Original Message-----
> From: Natalia Portillo [mailto:iosglpgc@xxxxxxxxxxx] 
> Sent: Thursday, December 19, 2002 7:17 PM
> To: 'Michael Robinson'
> Subject: RE: CDRECORD w/ out SCSI
> 
> 
> With Linux (and other UNIXes I think), you put in the kernel 
> boot command line: hdd=scsi (where hdd is the secondary slave 
> IDE), and it becomes a SCSI drive.
> 
> With cdrecord for win32 you need to have ATAPI installed. You 
> can get it from www.adaptec.com, or from any DVD playing 
> software. If you use Windows XP or .NET, you must get it from 
www.adaptec.com, install first as if it were Windows 2000, and then as
if it were Windows XP.

The Windows XP part of the installer install only one of three required
libraries, and the Windows 2000 part install all of they. But the one
that install the Windows XP part is needed if Windows XP, so because
this you install first the 2k one and then the XP one.

Regards

> -----Original Message-----
> From: port-dreamcast-owner@xxxxxxxxxx
> [mailto:port-dreamcast-owner@xxxxxxxxxx] On Behalf Of Michael Robinson
> Sent: Thursday, December 19, 2002 7:05 PM
> Cc: port-dreamcast@xxxxxxxxxx
> Subject: Re: CDRECORD w/ out SCSI
> 
> 
> After searching around the web a bit, it looks like I'll have to add
> some code to the kernel.  Since I'm using the Cygwin emulator 
> and not a 
> full installation are there any other CD-Writer programs I 
> could use to 
> burn the Dreamcast disk?
> 
> Michael Robinson wrote:
> 
> > Port-Dreamcast,
> >
> > My storage system is IDE not SCSI, how do I get CDRecord to
> work on my
> > system.  In the man pages it doesn't mention IDE at all.
> >
> > Thanks,
> > Michael
> >
> >
> >
> > .
> >
> 
>