Re: XFree problems

Hi Christian,
        I think I've narrowed down the problems I'm having.

pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 6.0 irq 0

Why is my video card wanting to use IRQ 0? Is there some hardware config
I'm missing? According to the PC164 manual, IRQ 0 is the internal clock
interrupt.
        dmesg shows this error:

unexpected machine check:

    mces    = 0x1
    vector  = 0x660
    param   = 0xfffffc0000006060
    pc      = 0x12006c740
    ra      = 0x12063f0fc
    curproc = 0xfffffe00059e9280
        pid = 129, comm = XFree86

panic: machine check

The pciconf -lv output for the card is:

none0@pci0:6:0: class=0x030000 card=0xffffffff chip=0x051a102b rev=0x02
hdr=0x00
    vendor   = 'Matrox Graphics Inc'
    device   = 'MGA 1064SG Hurricane/Cyclone 64-bit graphics chip'
    class    = display
    subclass = VGA

        Any other ideas?

Thanks,
Josh

On Fri, 25 Oct 2002, Christian Weisgerber wrote:

> Josh Tolbert <hemi@xxxxxxxxxxxxxx> wrote:
>
> >     What video cards are known to work with X 4.2.1 under
> > FreeBSD/alpha? I've tried a S3 Trio64V+, a Matrox Mystique 1064SG and a
> > Cirrus Logic "Laguna" board, all to no avail.
>
> The display I'm looking at while typing this is provided by XFree86
> 4.2.1 on FreeBSD 5.0-CURRENT/alpha running on a PC164 and this card:
>
> (--) PCI:*(0:7:0) Matrox MGA 1064SG rev 3, Mem @ 0x88000000/23, 
> 0x82830000/14, 0x82000000/23, BIOS @ 0x82800000/16
>
> There's nothing special about my XF86Config.  I created it with
> xf86config and later trimmed it manually.
>
> --
> Christian "naddy" Weisgerber                          naddy@xxxxxxxxxxxx
>
>
> To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
> with "unsubscribe freebsd-alpha" in the body of the message
>


To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
with "unsubscribe freebsd-alpha" in the body of the message