Re: Machine Check when booting dqa0?

On Thu, Oct 17, 2002 at 01:43:10AM -0500, Josh Tolbert wrote:

Inquiring minds would like to know what Alpha model you use..

> Hi again,
>       I've managed to get FreeBSD installed (twice) on two separate IDE
> drives. Unfortunately, when I go to boot the IDE drives, I get a Machine
> Check halt. I'm not sure why I'm having a problem booting from the drive,
> cause FreeBSD installs to the drive just fine.
>       Both drives are WDs (ugh, I don't like WDs, but it's what I had
> laying around) of the 3.2G and 6.4G variety. The device (dqa0) shows up
> along with the CD-ROM drive when I do a "show devices," but there's no
> device model number or name like the CD-ROM's entry has.
>       I'm going to try moving the hard drive to the secondary channel
> and using the CD-ROM on the primary channel to see if that makes any
> difference, but I'm open to other suggestions.
> 
> Thanks,
> Josh
> 
> 
> To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
> with "unsubscribe freebsd-alpha" in the body of the message
---end of quoted text---

-- 
|   / o / /_  _                                 wilko@xxxxxxxxxxx
|/|/ / / /(  (_)  Bulte                         Arnhem, the Netherlands

To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
with "unsubscribe freebsd-alpha" in the body of the message