Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: 14:48:56 EEST 2004
root@localhost:
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cce000.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0cce1f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0cce2a0.
acpi_alloc_wakeup_handler: can't alloc wake memory
Table 'FACP' at 0x1fff3040
Table 'APIC' at 0x1fff6f00
MADT: Found table at 0x1fff6f00
MP Configuration Table version 1.4 found at 0xc00f0d00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <GBT AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2612564716 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2612.56-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000001f6c9fff, 510267392 bytes (124577 pages)
avail memory = 507375616 (483 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00fac70
bios32: Entry = 0xfb100 (c00fb100) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb130
pnpbios: Found PnP BIOS data at 0xc00fbaf0
pnpbios: Entry = f0000:bb20 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: active-hi
lapic0: Routing NMI -> LINT1
lapic1: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 08 34 04 07 01 00 01 1a 01 00 01 30 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01
VESA: 32 mode(s) found
VESA: v3.0, 131072k memory, flags:0x1, mode table:0xc0738d22 (1000022)
VESA: NVIDIA
VESA: NVIDIA Corporation NV34 Board - c116dn Chip Rev
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fd5f0
PCI-Only Interrupts: 5 9 10 11
Location Bus Device Pin Link IRQs
embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 B 0x69 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 C 0x6a 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 0 B 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 0 C 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 0 D 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 1 A 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 1 B 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 1 C 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 2 1 D 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 2 A 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 2 B 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 2 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 2 2 D 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 3 C 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 4 2 3 D 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 4 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 4 B 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 4 C 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 5 2 4 D 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on
acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x1000-0x10bf,0xcf8-0xcff on
acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x8086, dev=0x2570, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2571, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: matched entry for 0.29.INTB (source )
pcib0: device is hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.29.INTC (source )
pcib0: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base fa000000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source )
pcib0: device is hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001400, size 5, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d800, size 6, enabled
map[18]: type 1, range 32, base fa001000, size 9, enabled
map[1c]: type 1, range 32, base fa002000, size 8, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d5, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
powerspec 2 supports D0 D3 current D0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f8000000, size 24, enabled
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib0: matched entry for 0.1.INTA (source )
pcib0: device is hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x10de, dev=0x0322, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce FX 5200> mem
0xf0000000-0xf7ffffff,0xf8000000-0xf8ffffff irq 16 at device 0.0 on pci1
pcib1: device nvidia0 requested decoded memory range
0xf8000000-0xf8ffffff
pcib1: device nvidia0 requested decoded memory range
0xf0000000-0xf7ffffff
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc000-0xc01f
irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc400-0xc41f
irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc800-0xc81f
irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xcc00-0xcc1f
irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=10
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=50 stat1=10
devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xd400-0xd4ff mem
0xfa002000-0xfa0020ff,0xfa001000-0xfa0011ff irq 17 at device 31.5 on pci0
pcm0: <Avance Logic ALC658 AC97 Codec (id = 0x414c4780)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 6 bit master volume, no 3D
Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM,
reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: sndbuf_setmap 357000, 4000; 0xd5247000 -> 357000
pcm0: sndbuf_setmap 35b000, 4000; 0xd524b000 -> 35b000
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x8041 0x8051 0x8041 0x8041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8041 0x8049 0x8041 0x8041
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on
acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2612564716 Hz quality -100
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata1-master: setting PIO4 on Intel ICH5 chip
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
ata1-master: setting UDMA33 on Intel ICH5 chip
ata1-slave: setting PIO4 on Intel ICH5 chip
GEOM: create disk ad2 dp=0xc2f79660
ad2: <Maxtor 6E020L0/NAR61590> ATA-7 disk at ata1-master
ad2: 19881MB (40718160 sectors), 40395 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad2
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:1048257
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:1048320 l:2146032
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:3194352
l:37523808
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 536707584 end 536739839
GEOM: Configure ad2s2, start 536739840 length 1098768384 end 1635508223
GEOM: Configure ad2s3, start 1635508224 length 19212189696 end
20847697919
acd0: <HL-DT-ST GCE-8525B/1.02> CDRW drive at ata1 as slave
acd0: read 6890KB/s (8957KB/s) write 2066KB/s (2066KB/s), 2048KB buffer,
PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm photo disc
pcm0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 2 (IRQ 0) to cluster 0GEOM: Con
fiioagurepic ad0: r2sou1atin, sgtar intpit 0n 3 le (IRQng 3)th to cl536707584
end 536707583
ustGer 0EOM: Configure ad2s1c, start 0
leioangtpich 0: 53rou6707ting 584intp in 4en (dIRQ 4) to536 clu70ste75r
083
ioapic0: routing intpin
6 (IRQ 6) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 17 (IRQ 17) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
GEOM: Configure ad2s2b, start 0 length 1098768384 end 1098768383
GEOM: Configure ad2s2c, start 0 length 1098768384 end 1098768383
GEOM: Configure ad2s3c, start 0 length 19212189696 end 19212189695
GEOM: Configure ad2s3d, start 0 length 268435456 end 268435455
GEOM: Configure ad2s3e, start 268435456 length 268435456 end 536870911
GEOM: Configure ad2s3f, start 536870912 length 6442450944 end 6979321855
GEOM: Configure ad2s3g, start 6979321856 length 12232867840 end
19212189695
Mounting root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
******************************************************************************************************************
2) CONFIGURATION FILE
machine i386
cpu I686_CPU
ident IDENT
maxusers 64
#To statically compile in device wiring instead of /boot/device.hints
#hints "IDENT.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as /, requires NFSCLIENT
#options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options PFIL_HOOKS # pfil(9) framework
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
options PERFMON
options MPTABLE_FORCE_HTT
options NO_MIXED_MODE
#options CLK_USE_I8254_CALIBRATION
options COMPAT_LINUX
options COMPAT_AOUT
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
device isa
#device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
##device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
options VESA
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device pcm
#device sbc
# syscons is the default console driver, resembling an SCO console
device sc
options SC_DFLT_FONT
options SC_HISTORY_SIZE=4096
#options SC_DISABLE_REBOOT
options SC_TWOBUTTON_MOUSE
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_YELLOW|BG_BLACK)
options SC_KERNEL_CONS_ATTR=(FG_LIGHTRED|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_RED|BG_BLACK)
makeoptions SC_DFLT_FONT=cp850
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
#device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
#device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard nics included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of ethernet chips
#device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device axe # ASIX Electronics USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
Paul
