Alphastation 500/600 are listed as not supported in alpha.html.
However, it seems my Alphastation 600 works just fine (please see dmesg
below), although it should be noted I haven't put it through proper stress
testing yet..
sk(4) is not in the "supported hardware" in alpha.html but it does work here,
a Dlink 530T adapter in this case.
I was not able to upgrade firmware (Srom 1.2) according to the instructions on
ftp.digital.com (due to lacking "AlphaBIOS"?), perhaps someone out there
knows how to update firmware through Srom?
Regards
Johan
[ using 453512 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.6-current (GENERIC) #0: Tue Jan 4 17:30:25 CET 2005
root@xxxxxxxxxxxxxxxxxx:/usr/src/sys/arch/alpha/compile/GENERIC
Digital AlphaStation 600 5/333, 333MHz
8192 byte page size, 1 processor.
total memory = 536870912 (524288K)
(2236416 reserved for PROM, 534634496 used by OpenBSD)
avail memory = 379592704 (370696K)
using 16315 buffers containing 133652480 bytes (130520K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164-0 (unknown minor type 0)
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 2
pci0 at cia0 bus 0
tga0 at pci0 dev 7 function 0 "DEC 21030" rev 0x02: DC21030 step B, board type
T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at kn20aa irq 8
wsdisplay0 at tga0: console (std, vt100 emulation)
ppb0 at pci0 dev 9 function 0 "DEC 21050 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
de0 at pci1 dev 0 function 0 "DEC 21040" rev 0x24: kn20aa irq 12
de0: DEC 21040 [10Mb/s] pass 2.4 address 00:00:f8:23:24:28
isp0 at pci1 dev 1 function 0 "QLogic ISP1020" rev 0x02: kn20aa irq 13
isp0: invalid NVRAM header
scsibus0 at isp0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, ATLAS 10K 18SCA, UCIE> SCSI3 0/direct
fixed
sd0: 17366MB, 10042 cyl, 12 head, 295 sec, 512 bytes/sec, 35566499 sec total
cd0 at scsibus0 targ 5 lun 0: <DEC, RRD45 (C) DEC, 0436> SCSI2 5/cdrom
removable
isp1 at pci1 dev 2 function 0 "QLogic ISP1020" rev 0x02: kn20aa irq 14
isp1: invalid NVRAM header
scsibus1 at isp1: 16 targets
pceb0 at pci0 dev 10 function 0 "Intel 82375EB EISA" rev 0x05
skc0 at pci0 dev 11 function 0 "D-Link Systems DGE-530T" rev 0x11: kn20aa irq
0
skc0: Marvell Yukon Gigabit Ethernet (0x1)
sk0 at skc0 port A: address 00:0f:3d:ef:67:f8
eephy0 at sk0 phy 0: Marvell 88E1000* Gigabit PHY
fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x08, i82559: kn20aa irq 4,
address 00:90:27:77:ec:f1
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
eisa0 at pceb0
isa0 at pceb0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
root on sd0a swap on sd0b
rootdev=0x800 rrootdev=0x800 rawdev=0x802
stray isa irq 4
stray isa irq 3
|
