Sorry about the duplicate messages.
Here is a dmesg from after compiling -current last night.
If anyone has anything specific I can test for, just let me know and
I'll give it a go. I've still got to get the other disk in there, and
I'll build all of ports -current once I do. That oughtta count as a
stress test...
[ using 503680 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.4-beta (GENERIC) #0: Wed Aug 20 23:20:09 MDT 2003
root@xxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/arch/alpha/compile/GENERIC
Digital AlphaPC 164 432 MHz
8192 byte page size, 1 processor.
total memory = 268435456 (262144K)
(2531328 reserved for PROM, 265904128 used by OpenBSD)
avail memory = 226877440 (221560K)
using 3245 buffers containing 26583040 bytes (25960K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-1 (pass 1)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
cia0: using BWX for PCI config and bus access
pci0 at cia0 bus 0
de0 at pci0 dev 5 function 0 "DEC 21140" rev 0x20: eb164 irq 2
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0 address 00:e0:29:05:99:17
vga0 at pci0 dev 7 function 0 "S3 Trio32/64" rev 0x00
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sio0 at pci0 dev 8 function 0 "Intel 82378IB PCI-ISA" rev 0x43
siop0 at pci0 dev 9 function 0 "Symbios Logic 53c810" rev 0x12 eb164 irq 3
scsibus0 at siop0: 8 targets
siop0: target 0 now using 8 bit 10.0 MHz 8 REQ/ACK offset xfers
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST52160N, 0285> SCSI2 0/direct fixed
sd0: 2069MB, 6536 cyl, 4 head, 162 sec, 512 bytes/sec, 4238282 sec total
siop0: target 4 now using 8 bit 10.0 MHz 8 REQ/ACK offset xfers
cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom
removable
pciide0 at pci0 dev 11 function 0 "CMD Technology PCI0646" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
root on sd0a swap on sd0b
rootdev=0x800 rrootdev=0x800 rawdev=0x802
de0: enabling 10baseT port
stray isa irq 4
stray isa irq 3
de0: enabling Full Duplex 100baseTX port
de0: DAD detected duplicate IPv6 address fe80:0001::02e0:29ff:fe05:9917: NS
in/out=1/1, NA in=0
de0: DAD complete for fe80:0001::02e0:29ff:fe05:9917 - duplicate found
de0: manual intervention required
|
