Re: packet re-ordering on SMP machines.

jamal wrote:
> 
> 
> 
> NAPI fixes packet reordering problems.

It does indeed.  I just patched the e1000 with the latest NAPI patch
I could find (from Aug 15 or so), and the re-ordering problems went away.

The amount of packets dropped decreased too, but I still see about 1 out of
1000 packets dropped due to rx-FIFO or rx-dropped.  This is when trying to run
60,000 pps of 1514 byte packets from one port to the other on the same 
dual-port e1000
NIC (copper).  It will generate up to about 72,000 pps without dropping too many
more...

I will do some more tests on two single-port NICs soon to see if that
performs better.

Also, I see the hard_start_xmit call failing 5876 times out of 2719493
calls (for example).  The code that calls the method looks like this:

                         spin_lock_bh(&odev->xmit_lock);
                         if (!netif_queue_stopped(odev)) {
                                 if (odev->hard_start_xmit(next->skb, odev)) {
                                         if (net_ratelimit()) {
                                                 printk(KERN_INFO "Hard xmit 
error\n");
                                         }
                                         next->errors++;
                                         next->last_ok = 0;
                                 }
                                 else {
                                         next->last_ok = 1;
                                         next->sofar++;
                                         next->tx_bytes += (next->cur_pkt_size 
+ 4); /* count csum */
                                 }

                                 next->next_tx_ns = getRelativeCurNs() + 
next->ipg;
                         }
                         else {  /* Re-try it next time */
                                 next->last_ok = 0;
                         }

                         spin_unlock_bh(&odev->xmit_lock);

I have not seen hard_start_xmit fail on other drivers, even when over-driving 
them
well beyond their capabilities.  Any ideas what causes the hard_start_xmit 
errors?

Thanks,
Ben

-- 
Ben Greear <greearb@xxxxxxxxxxxxxxx>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear