i tried this too,using different combinations
possible.but still it doesnt work.and i checked out
this link and found its for rh 6.x.so dont know if
this will work for rh7.x.for me it doesn't anyway.
Anyway thanks a lot.appreciate it.
Vinod
--- Nivedita Singhvi <nivedita@xxxxxxxxxx> wrote:
>
>
> A search on RedHat for static routes shows up the
> following:
>
>
http://www.redhat.com/support/resources/tips/Network-Config-Tips
> /Network-Config-Tips-4.html
>
> Not sure which distribution that goes with. I
> couldn't find anything in
> the RedHat 7.2 Reference Guide about static routes.
>
> Note that the format suggests that you provide the
> interface, not the
> gateway:
>
> "Each line of the static-routes files should have
> the format:
>
> device args
>
> When a network interface is brought up, each line
> for that interface
> is passed to route as:
>
> route add -args device
> "
>
> thanks,
> Nivedita
>
>
> Vinod <geekvinod@xxxxxxxxx>@vger.kernel.org on
> 04/29/2002 12:41:19 PM
>
> Sent by: linux-net-owner@xxxxxxxxxxxxxxx
>
>
> To: Glynn Clements <glynn.clements@xxxxxxxxxx>
> cc: linux-net@xxxxxxxxxxxxxxx
> Subject: Re: making routes permanent
>
>
>
> i tried putting
> any net 10.0.3.0 255.255.255.0 gw 10.0.0.10
> in my /etc/sysconfig/static-routes but still it
> didnt
> show up as a permanent route.i looked at the
> /etc/rc.d/inet.d/network script and as far as i
> could
> interpret(am a relative newbie),this was supposed to
> be the format for my RH 7.2.
> can anyone using rh7.2 confirm that "any net
> 10.0.3.0
> 255.255.255.0 gw 10.0.0.10" is what needs to be put
> in
> /etc/sysconfig/static-routes to make this entry
> permanent?
> Thanks,
> Vinod
> --- Glynn Clements <glynn.clements@xxxxxxxxxx>
> wrote:
> >
> > Vinod wrote:
> >
> > > how can one make route's permanent?
> > > i wanted to make this permanent:
> > > route add -net 10.0.3.0 netmaks 255.255.255.0 gw
> > > 10.0.0.10 dev eth1
> > >
> > > i tried putting this in
> > /etc/sysconfig/static-routes
> > > but it didnt work.
> > > i have rh7.2 installed.
> >
> > I don't know about RH7.x, but for RH6.2 you would
> > use the line:
> >
> > any net 10.0.3.0 255.255.255.0 gw 10.0.0.10
> >
> > If it's different on 7.x, you can deduce the
> format
> > from the network
> > startup script (e.g. /etc/rc.d/init.d/network).
> >
> > Note that specifying both "gw" and "dev" is
> > redundant. If you specify
> > a gateway, the device is automatically determined
> > from the gateway
> > address.
> >
> > --
> > Glynn Clements <glynn.clements@xxxxxxxxxx>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Health - your guide to health and wellness
> http://health.yahoo.com
> -
> To unsubscribe from this list: send the line
> "unsubscribe linux-net" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at
> http://vger.kernel.org/majordomo-info.html
>
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|
