routing problems...?

Hi all, 

My first post. I've searched the archive, but I can't resolve my issue. Here 
goes; 

workstation Win2000 running openvpn 1.6 (VPN 10.1.1.2 - LAN 192.168.1.100)
server linux slack 10 running openvpn 1.6 (VPN 10.1.1.1 - LAN 192.168.0.2)
linksys gateway in between (forward UDP 5000 to 192.168.0.2 - LAN 
192.168.0.1) 

my tunnel is up, i can ping both ends using endpoints IP 10.1.1.1 and 
10.1.1.2. I can also ping both ends using LAN IP 192.168.1.100 (win2000) and 
192.168.0.2 (linux server). But that's it. I run tcpdump on the linux 
server, interface tap0. When I try to ping 192.168.0.153 from the win2000 
workstation, tcpdump dumps this; 

14:10:14.535342 arp who-has 192.168.0.153 tell 10.1.1.2 

my linksys gateway is the linux server side's default gw. On it, I defined 
the following routes; 

10.1.1.0 mask 255.255.255.0 192.168.0.2 

I also added this route on win2000; 192.168.0.0 mask 255.255.255.0 10.1.1.1 

and this one on the linux server; 192.168.1.0 mask 255.255.255.0 10.1.1.2 

IP forward is set on the linux server. 

IPtables policy are set to ACCEPT, no rule. 

In short, I ping immediatly connected interfaces at both ends, but nothing 
farther. 

Suggestions are much welcomed.
Thanks,
Jean 



-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com