RE: testing WIC1-DSU-T1 w/ Kentrox DSU

Hi.

In a Normal 568B terminated cable, you Swap the Orage and Blue pairs on
one end.  Also, You have to set clock source line on one side and clock
source internal on the other.

Ejay Hire
Network Engineer (Looking for side work)

-----Original Message-----
From: Eric L. Howard [mailto:elh@xxxxxxxxxxxxxxxxxxxx] 
Sent: Friday, August 08, 2003 12:53 PM
To: cisco-nsp@xxxxxxxxxxxxxxx
Subject: [nsp] testing WIC1-DSU-T1 w/ Kentrox DSU

In testing a wic1-dsu back to back w/ a Kentrox - any special cable
pin-out
needed?

       ~elh

-- 
Eric L. Howard           e l h @ o u t r e a c h n e t w o r k s . c o m
------------------------------------------------------------------------
www.OutreachNetworks.com                                    313.297.9900
------------------------------------------------------------------------
JabberID: elh@xxxxxxxxxx                 Advocate of the Theocratic Rule
_______________________________________________
cisco-nsp mailing list  cisco-nsp@xxxxxxxxxxxxxxx
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  cisco-nsp@xxxxxxxxxxxxxxx
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/