RE: Cisco to non-Cisco vpn

Not familiar with that firewall, but I have a VPN setup between a 2611 and a
CheckPoint Firewall-1 Solaris box. There are several documents out on the
net that describe how to do this, so you might check one out and then just
adapt it to the Watchguard box. If you can't find the links, email me and
I'll dig through my bookmarks and find one for you...

-Jeff 

-----Original Message-----
From: Greg Stein [mailto:gstein@xxxxxxxxxxx]
Sent: Thursday, July 31, 2003 3:52 PM
To: Voralt; cisco-nsp@xxxxxxxxxxxxxxx
Subject: Re: [nsp] Cisco to non-Cisco vpn


Sorry... It would be a Watchguard Firebox II firewall to a Cisco 1605r 
router.

Voralt wrote:

>There is no "standard config" for IPSec.  The settings you need are
specific
>to each device, so we would need to know what non-Cisco device you are
>referring to.
>
>----- Original Message -----
>From: "Greg Stein" <gstein@xxxxxxxxxxx>
>To: <cisco-nsp@xxxxxxxxxxxxxxx>
>Sent: Thursday, July 31, 2003 5:31 PM
>Subject: [nsp] Cisco to non-Cisco vpn
>
>
>  
>
>>Can someone point me to a document with the quickest way to set up a vpn
>>tunnel between a Cisco router with ipsec and a non-Cisco device?
>>
>>Thanks,
>>Greg
>>
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp@xxxxxxxxxxxxxxx
>>http://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>    
>>

_______________________________________________
cisco-nsp mailing list  cisco-nsp@xxxxxxxxxxxxxxx
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  cisco-nsp@xxxxxxxxxxxxxxx
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/