Re: NRPE Issue

Well are you running it under xinetd or inetd 

xinetd there is a config simmilar to it

Showkilr

On Fri, 2003-01-10 at 00:14, Justin wrote:
> The config said if I was running under xinetd or inetd it did not matter.
> But I changed the line anyways and still the same problem..
> 
> Justin Wedeking
> 
> ----- Original Message -----
> From: "Showkilr" <sysadmin@xxxxxxxxxxxx>
> To: "Justin" <justin@xxxxxxxxx>
> Cc: <nagios-users@xxxxxxxxxxxxxxxxxxxxx>
> Sent: Friday, January 10, 2003 12:06 AM
> Subject: Re: [Nagios-users] NRPE Issue
> 
> 
> > sounds like the allowed_hosts is set to the loopback which is default
> > for security reasons.
> >
> > On the remote machine where nrpe is running look in the config file
> > nrpe.cfg
> >
> > allowed_hosts=127.0.0.1
> >
> > change to
> >
> > allowed_hosts=127.0.0.1,<NAGIOS SERVER IP>
> >
> > restart nrpe
> >
> > Showkilr
> >
> > On Thu, 2003-01-09 at 23:38, Justin wrote:
> > > I am stumped on this one.  I looked through the archives and could not
> find a similar problem.  I am sure it is a fairly easy fix, something I
> might be missing.  Thanks
> > >
> > >
> > >
> > > ./check_nrpe -H 129.208.56.12 -p 5666 -c check_users
> > > CHECK_NRPE: Error receiving data from host.
> > >
> > >
> > >
> > > Justin Wedeking
> > >
> > >
> >
> >
> 
> 
> 
> -------------------------------------------------------
> This SF.NET email is sponsored by:
> SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> _______________________________________________
> Nagios-users mailing list
> Nagios-users@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/nagios-users




-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com