How about just ignoring the dependency error:
rpm -ivh --nodeps kannel-latest-version.i386.rpm
At least, if you are not going to use Kannel with ssl, this should
work. Personally, I recompiled Kannel to get rid of that error message.
Adreas,
thanks for that suggestion, but i forgot to mention
that i tried that as well.
It's seems that other people tried the same things i
did and ran into the similar problems.
In my case when i try to compile it with the default
configuration i run into errors suggesting me to get a
multi threaded ssl version or something.
I'm not so keen on fooling around with this ssl
version i got running because it also took me a while
to get it up and running with certificates and all,
ssh etc.
I feel the only way i might be able to install it
succesfully is to install it with all dependendies?
off, but i find it such a same to run in all kinds of
limitations because of it.
Thanks anyway,
Dirk
> it from scratch - this
> worked fine for me (SUSE 7.3 and 8.0). Dont forget
> to download the latest
> version of libxml and compile it before you compile
> kannel.
>
> andreas
>
>
>
>
>
> "Dirk van der Giesen" <dirk@xxxxxxxxxxxxxxxxxx>
> Sent by: users-admin@xxxxxxxxxxxxxxxx
> 17.12.2002 15:26
>
>
> To: <mekki@xxxxxxxxxx>
> cc: <users@xxxxxxxxxxxxxxxx>
> Subject: installing problems with rpm
>
>
> Hi Mekki or anybody at user,
>
> Did you ever got your installing problem solved for
> kannel.
> I get exact the same error message as you did, when
> i execute:
>
> rpm -ivh kannel-latest-version.i386.rpm
>
> >libcrypto.so.0.9.6 is needed
> >libssl.so.0.9.6 is needed
>
> When i do:
> rpm -q openssl
>
> i get:
>
> >openssl-0.9.6c-2mdk
>
> Hope you can help,
>
> Thanks,
>
> Dirk
>
> > ----------------------------------------- (on
> rhythm)
>
> Privileged/Confidential Information may be contained
> in this message.
> If you are not the addressee indicated in this
> message (or responsible
> for delivery of the message to such person), you may
> not copy or
> deliver this message to anyone. In such case, you
> should destroy this message
> and kindly notify the sender by reply email. Please
> advise immediately
> if you or your employer does not consent to email
> for messages of this
> kind. Opinions, conclusions and other information
> in this message that
> do not relate to the official business of the Ogilvy
> Group shall be
> understood as neither given nor endorsed by it.
>
>
---------------------------------------------------------
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
--__--__--
_______________________________________________
users mailing list
users@xxxxxxxxxxxxxxxx
http://kannel.3glab.org/mailman/listinfo/users
End of users Digest
--
-----------------------------------------------------
Jaakko Heikkilä
Thread at a glance:
Previous Message by Date:
click to view message preview
Re: installing problems with rpm
Adreas,
thanks for that suggestion, but i forgot to mention
that i tried that as well.
It's seems that other people tried the same things i
did and ran into the similar problems.
In my case when i try to compile it with the default
configuration i run into errors suggesting me to get a
multi threaded ssl version or something.
I'm not so keen on fooling around with this ssl
version i got running because it also took me a while
to get it up and running with certificates and all,
ssh etc.
I feel the only way i might be able to install it
succesfully is to install it with all dependendies?
off, but i find it such a same to run in all kinds of
limitations because of it.
Thanks anyway,
Dirk
> it from scratch - this
> worked fine for me (SUSE 7.3 and 8.0). Dont forget
> to download the latest
> version of libxml and compile it before you compile
> kannel.
>
> andreas
>
>
>
>
>
> "Dirk van der Giesen" <dirk@xxxxxxxxxxxxxxxxxx>
> Sent by: users-admin@xxxxxxxxxxxxxxxx
> 17.12.2002 15:26
>
>
> To: <mekki@xxxxxxxxxx>
> cc: <users@xxxxxxxxxxxxxxxx>
> Subject: installing problems with rpm
>
>
> Hi Mekki or anybody at user,
>
> Did you ever got your installing problem solved for
> kannel.
> I get exact the same error message as you did, when
> i execute:
>
> rpm -ivh kannel-latest-version.i386.rpm
>
> >libcrypto.so.0.9.6 is needed
> >libssl.so.0.9.6 is needed
>
> When i do:
> rpm -q openssl
>
> i get:
>
> >openssl-0.9.6c-2mdk
>
> Hope you can help,
>
> Thanks,
>
> Dirk
>
> > ----------------------------------------- (on
> rhythm)
>
> Privileged/Confidential Information may be contained
> in this message.
> If you are not the addressee indicated in this
> message (or responsible
> for delivery of the message to such person), you may
> not copy or
> deliver this message to anyone. In such case, you
> should destroy this message
> and kindly notify the sender by reply email. Please
> advise immediately
> if you or your employer does not consent to email
> for messages of this
> kind. Opinions, conclusions and other information
> in this message that
> do not relate to the official business of the Ogilvy
> Group shall be
> understood as neither given nor endorsed by it.
>
>
---------------------------------------------------------
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Next Message by Date:
click to view message preview
Kannel as Email2SMS Gateway
Hello,
i would use Kannel to exchange emailtosms over an analog modem to make dial
into a smsc. Is this possible?
regards
Adam
Previous Message by Thread:
click to view message preview
Re: installing problems with rpm
Adreas,
thanks for that suggestion, but i forgot to mention
that i tried that as well.
It's seems that other people tried the same things i
did and ran into the similar problems.
In my case when i try to compile it with the default
configuration i run into errors suggesting me to get a
multi threaded ssl version or something.
I'm not so keen on fooling around with this ssl
version i got running because it also took me a while
to get it up and running with certificates and all,
ssh etc.
I feel the only way i might be able to install it
succesfully is to install it with all dependendies?
off, but i find it such a same to run in all kinds of
limitations because of it.
Thanks anyway,
Dirk
> it from scratch - this
> worked fine for me (SUSE 7.3 and 8.0). Dont forget
> to download the latest
> version of libxml and compile it before you compile
> kannel.
>
> andreas
>
>
>
>
>
> "Dirk van der Giesen" <dirk@xxxxxxxxxxxxxxxxxx>
> Sent by: users-admin@xxxxxxxxxxxxxxxx
> 17.12.2002 15:26
>
>
> To: <mekki@xxxxxxxxxx>
> cc: <users@xxxxxxxxxxxxxxxx>
> Subject: installing problems with rpm
>
>
> Hi Mekki or anybody at user,
>
> Did you ever got your installing problem solved for
> kannel.
> I get exact the same error message as you did, when
> i execute:
>
> rpm -ivh kannel-latest-version.i386.rpm
>
> >libcrypto.so.0.9.6 is needed
> >libssl.so.0.9.6 is needed
>
> When i do:
> rpm -q openssl
>
> i get:
>
> >openssl-0.9.6c-2mdk
>
> Hope you can help,
>
> Thanks,
>
> Dirk
>
> > ----------------------------------------- (on
> rhythm)
>
> Privileged/Confidential Information may be contained
> in this message.
> If you are not the addressee indicated in this
> message (or responsible
> for delivery of the message to such person), you may
> not copy or
> deliver this message to anyone. In such case, you
> should destroy this message
> and kindly notify the sender by reply email. Please
> advise immediately
> if you or your employer does not consent to email
> for messages of this
> kind. Opinions, conclusions and other information
> in this message that
> do not relate to the official business of the Ogilvy
> Group shall be
> understood as neither given nor endorsed by it.
>
>
---------------------------------------------------------
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Next Message by Thread:
click to view message preview
Routing Problem
Hi,
I'm trying to start-up the wap gateway, and I get the following:
2002-12-17 12:20:34 [0] INFO: Added logfile `/tmp/bearerbox.log' with level `0'.
2002-12-17 12:20:34 [0] DEBUG: HTTP: Opening server at port 13000.
2002-12-17 12:20:34 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2002-12-17 12:20:34 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)
2002-12-17 12:20:34 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)
2002-12-17 12:20:34 [0] DEBUG: starting UDP sender/receiver module
2002-12-17 12:20:34 [0] DEBUG: udpc_create: Bound to UDP <0.0.0.0:9200>
2002-12-17 12:20:34 [0] DEBUG: Started thread 4 (gw/bb_udp.c:udp_receiver)
2002-12-17 12:20:34 [0] DEBUG: Started thread 5 (gw/bb_udp.c:udp_sender)
2002-12-17 12:20:34 [0] DEBUG: udpc_create: Bound to UDP <0.0.0.0:9201>
2002-12-17 12:20:34 [0] DEBUG: Started thread 6 (gw/bb_udp.c:udp_receiver)
2002-12-17 12:20:34 [0] DEBUG: Started thread 7 (gw/bb_udp.c:udp_sender)
2002-12-17 12:20:34 [0] DEBUG: starting wapbox connection module
2002-12-17 12:20:34 [0] DEBUG: Started thread 8 (gw/bb_boxc.c:wdp_to_wapboxes)
2002-12-17 12:20:34 [0] DEBUG: Started thread 9 (gw/bb_boxc.c:wapboxc_run)
2002-12-17 12:20:34 [0] DEBUG: starting WDP router
2002-12-17 12:20:34 [0] DEBUG: Started thread 10 (gw/bearerbox.c:wdp_router)
2002-12-17 12:20:34 [0] INFO: ----------------------------------------
2002-12-17 12:20:34 [0] INFO: Kannel bearerbox II version 1.2.1 starting
2002-12-17 12:20:34 [0] INFO: MAIN: Start-up done, entering mainloop
2002-12-17 12:20:43 [6] DEBUG: datagram received
2002-12-17 12:20:43 [8] DEBUG: Did not find previous routing info for WDP,
generating new
2002-12-17 12:20:43 [8] WARNING: Cannot route message, discard it
What's happening? Where do I configure the WDP router?
Thanks a lot.
La información contenida en este correo es para uso exclusivo de
los destinatarios del mismo. Está prohibido a las personas o entidades
que no sean los destinatarios de este correo, realizar cualquier tipo de
modificación, copia o distribución del mismo.
Si Ud. recibe este correo por error, tenga a bien notificar al emisor y
eliminarlo.
This email is confidential and intended solely for the use of the
individual to whom it is addressed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of
Personal. If you are not the intended recipient, be advised that you have
received this email in error and that any use, dissemination, forwarding,
printing, or copying of this email is strictly prohibited. If you have
received this email in error please contact the sender.(Embedded image
moved to file: pic01725.pcx)
pic01725.pcx
Description: Binary data