Re: NSLU2 dissapperared

Inge asked if you had disabled uPNP on your NSLU2 and your router, 
have you?  I had all kinds of problems with my NSLU2 disappearing 
before I disabled uPNP on both devices.

tk
--- In nslu2-linux-hHKSG33TihhbjbujkaE4pw@xxxxxxxxxxxxxxxx, "DreamCarrier" 
<korea@xxxx> 
wrote:
> 
> Well obviously this had absolutely nothing to do with the slug.
> I connected another PC using WLAN and it connected to the slug
> instantly. It can't see my other PC so I guess there's something 
wrong
> with it.
> I checked all subnet settings etc and all looks perfect. Still no
> connection though... Last thing I need to check is that this should
> have something to do with the router taking over the PC's MAC 
address
> in order to connect to my ISP.
> 
> Slug works good... Sorry for spamming this fine forum...
> 
> 
>  
> 
> --- In nslu2-linux-hHKSG33TihhbjbujkaE4pw@xxxxxxxxxxxxxxxx, Inge Bjørnvall 
> Arnesen
> <i.b.arnesen@xxxx> wrote:
> > Can you hook it up directly to the PC using a uplink cable? As I
> understand
> > it the only thing that has changed is the router and eliminating
> that may
> > confirm that it is indeed the cause. Other than than my only 
other
> > suggestion is either IP address conflict or netmask putting the 
PC
> and the
> > slug on different logical nets. Do you have static IP/netmask on
> your PC and
> > slug? Can you ping your Kiss from the PC?
> > 
> > I guess uPnP cannot be blamed if they're on the same segment, but
> have you
> > tried disabling it both on the router and the slug?
> > 
> > best,
> > 
> > - Inge
> > 
> > 
> > -----Original Message-----
> > From: DreamCarrier [mailto:korea@xxxx] 
> > Sent: 12. mars 2005 08:57
> > To: nslu2-linux-hHKSG33TihhbjbujkaE4pw@xxxxxxxxxxxxxxxx
> > Subject: [nslu2-linux] Re: NSLU2 dissapperared
> > 
> > 
> > 
> > 
> > I can't access the shared disks from PC. Not by it's name and 
not by
> its ip.
> > I can't ping it, can't telnet to it, can't see it at all from 
the PC.
> > 
> > It should be on the same segment as the PC and the KISS. 
> > Does it change segment itself after reset?
> > 
> > --- In nslu2-linux-hHKSG33TihhbjbujkaE4pw@xxxxxxxxxxxxxxxx, Inge Bjørnvall 
> > Arnesen
> > <i.b.arnesen@xxxx> wrote:
> > > Since the KISS can still see it, it is probably not a slug 
issue. Do
> > you use
> > > the name of your slug to access it from the PC (or look for it 
by
> > browsing)?
> > > Have you tried using IP (e.g. \\192.168.1.77\public)? If that
> > doesn't work,
> > > can you ping it? If yes, can you telnet to it? If no, have you 
looked 
> > > in your router to see if the two segments have any kind of 
block
> > between them? 
> > > 
> > > best,
> > > 
> > > -- Inge
> > > 
> > > 
> > > -----Original Message-----
> > > From: DreamCarrier [mailto:korea@xxxx]
> > > Sent: 12. mars 2005 08:06
> > > To: nslu2-linux-hHKSG33TihhbjbujkaE4pw@xxxxxxxxxxxxxxxx
> > > Subject: [nslu2-linux] NSLU2 dissapperared
> > > 
> > > 
> > > 
> > > 
> > > I know this may not be the right forum for this but I am 
desparate.
> > > 
> > > After my router broke down I bought a new one and put it on the
> > network. Now
> > > I can't find my NSLU2 anymore.
> > > 
> > > I tried running the setup tool
> > > entering it's (old) ip
> > > resetting
> > > 
> > > Funny thing though. I use it as a mediaserver for KISS DP588 
and the
> > KISS
> > > can still see the slug.
> > > 
> > > Help needed instantly.. thanks!
> > > 
> > > 
> > > 
> > > 
> > > 
> > > [ Moderator Note: All static information is slowly moving to 
the Wiki 
> > > at http://www.nslu2-linux.org ] Yahoo! Groups Links
> > 
> > 
> > 
> > 
> > 
> > [ Moderator Note: All static information is slowly moving to the 
Wiki at
> > http://www.nslu2-linux.org ] 
> > Yahoo! Groups Links





[ Moderator Note: All static information is slowly moving to the Wiki at 
http://www.nslu2-linux.org ]