mathematics.abaqus.user (thread)

Wish U Peace in 2005 & ahead, shailendra Indulkar
Can c++ be used for user subroutines?, trkarthik
how to define pretension, wizard_bestin
VUMAT Running Problem, John M. Qian
- Re: VUMAT Running Problem, 12locken
Micropipette Aspiration model, sarius79
URGENT HELP PLZZZ..., wizard_bestin
Beam section definition - query, abdulhashim
- RE: Beam section definition - query, Sridharan
How to save XY plots as avi, tadiajohn
How to implement the incompressibility of material using UMAT?, nhabe1
- Re: How to implement the incompressibility of material using UMAT?, sunnweii
  - Re: Re: How to implement the incompressibility of material using UMAT?, Master Frank aka Frank Richter
Regarding Connector Property, Kai
- Re: Regarding Connector Property, janakiramaraju penemitsa
NUMERICAL SINGULARITY Warning, abdulhashim
- Re: NUMERICAL SINGULARITY Warning, sgdon
- Re: NUMERICAL SINGULARITY Warning, Ibrahim iflefel
how to model a brake disc, ²ÌÖ¾Åô
contact force question, wizard_bestin
Illegal floating point, firat sever
Need for example of UMAT user subroutine, nhabe1
Contour plots for a section in Abaqus cae, trkarthik
- RE: Contour plots for a section in Abaqus cae, Roger Keene
  - RE: Contour plots for a section in Abaqus cae, george jefferson
  - RE: Contour plots for a section in Abaqus cae, Kartik Srinivas
    - Re: Contour plots for a section in Abaqus cae, trkarthik
- Phase change problems in Abaqus, Kannan Subramanian
material properties......., Chin Huei
- Re: material properties......., Ovunc Mutlu
How can i define proof stress, m m
RIGID SOLID AND GRAVITY, irenemengual
- Re: RIGID SOLID AND GRAVITY, Yang Long
solved example, Korochkina T.V.
- Re: solved example, Yang Long
- RE: solved example, Korochkina T.V.
Debugging UMAT using Comapq Visual Fortran, flinner19766
- Need help on CAE, F. Ding
- Re: Debugging UMAT using Comapq Visual Fortran, Gurusathya R
  - Re: Debugging UMAT using Comapq Visual Fortran, minghui_ub
- RE: Debugging UMAT using Comapq Visual Fortran, Marco Parente
Re: how to model increasing Young's modulus. Was: plasticity and engineering vs, Thomas Zander
Structured meshing, marchello_si
About stress linearization and membrane or bending stress from shell elememt!, Tiger
Certain Problems in Dynamic Problem Analysis, halfway76
- Re: Certain Problems in Dynamic Problem Analysis, sgdon
- Re: Certain Problems in Dynamic Problem Analysis, sri r
  - Re: Certain Problems in Dynamic Problem Analysis, Yang Long
Drucker Prager model, wizard_bestin
- Re: Drucker Prager model, BenZ
- RE: Re: Drucker Prager model, Towse, Adam
  - Re: Drucker Prager model, wizard_bestin
Analytical Rigid Part, Sarius
- Re: Analytical Rigid Part, acosa_feira
  - Re: Analytical Rigid Part, sarius79
- RE: Re: Analytical Rigid Part, Schwantes, Stan
plasticity and engineering vs true stress/strain, Thomas Zander
- Re: plasticity and engineering vs true stress/strain, BenZ
  - how to model increasing Young's modulus. Was: plasticity and engineering vs true stress/strain, Thomas Zander
    - Re: how to model increasing Young's modulus. Was: plasticity and engineering vs true stress/strain, BenZ
    - help needed, BINU OOMMEN
    - loading of a supported plate, Thomas Zander
Hyperelastic material and Abaqus, sri r
- RE: Hyperelastic material and Abaqus, Russ Moerland
  - Re: RE: Hyperelastic material and Abaqus, sri r
- RE: Hyperelastic material and Abaqus, Russell Moerland
analytical surface for abaqus / cae, barnes_kc
Failure model, Kim, Yooil
- Re: Failure model, Ovunc Mutlu
RE: User Subroutines, D'Arconte, Rich
- Re: User Subroutines, minghui_ub
  - Re: User Subroutines, Ovunc Mutlu
Infinite element nodes points- please help!, bobfkirk
USDFLD in Sun Platform, Jaw Woei Boh
sheet metal forming, mmirib
ERROR CODE 5, Geralf Pineda Hernández
- Re: ERROR CODE 5, Cheng-Kong Wu
- Re: ERROR CODE 5, Geralf Pineda Hernández
  - User Subroutines, Gurusathya R
  - Re: ERROR CODE 5, charlesbreen
- Re: Re: ERROR CODE 5, Geralf Pineda Hernández
Kernel Error?, Kai
- Re: Kernel Error?, Dave Lindeman
Problem with URDFIL, wlightw
- Re: Problem with URDFIL, Amir Siddiq
  - Re: Problem with URDFIL, wlightw
Extrapolation from INTEGRATION POINTS to NODES- What method does ABAQUS use??, Uday komaragiri
- Re: Extrapolation from INTEGRATION POINTS to NODES- What method does ABAQUS use??, Dave Lindeman
- RE: Extrapolation from INTEGRATION POINTS to NODES- What method does ABAQUS use??, Remi Duquette
  - Re: Extrapolation from INTEGRATION POINTS to NODES- What method does ABAQUS use??, Uday komaragiri
Spring Analysis, Kausik Mitra
Defining nodes for infinite elements, bobfkirk
PLASTIC PROPERTIES OF STEEL S-275, Fernando
modelling enthalpy in abaqus, Nikola Beerlage
About spot weld and error 5!, Tiger
ABAQUS Data Storage Manager error, charlesbreen
4 node shell elements, Kim, Yooil
- Re: 4 node shell elements, BenZ
  - RE: Re: 4 node shell elements, Roger Keene
    - Re: Re: 4 node shell elements, Kim, Yooil
    - Re: 4 node shell elements, BenZ
abaqus command not recognised, n_balhi
- Re: abaqus command not recognised, fernandocachonerin
  - Re: abaqus command not recognised, n_balhi
command not recognised, charlesbreen
- Re: command not recognised, Cheng-Kong Wu
- Re: command not recognised, Manish Virmani
  - Re: command not recognised, charlesbreen
UMAT for fluids, Ana Vila Verde
- Re: UMAT for fluids, BenZ
  - Re: UMAT for fluids, Ana Vila Verde
Error Code : 5, abdulhashim
- Re: Error Code : 5, Ana Vila Verde
RC beam, Ahmed Mostafa
- Re: RC beam, Sandeep S. Pendhari
  - Re: RC beam, Ahmed Mostafa
    - Re: RC beam, Sandeep S. Pendhari
Anyone working on Viscoelasticity, prasad D
AW: urgent help regarding contact surface (die attachment process), Brenner, Achim
- Re: AW: urgent help regarding contact surface (die attachment process), Keith Chew
  - Re: AW: urgent help regarding contact surface (die attachment process), Shiladitya Basu
    - Re: AW: urgent help regarding contact surface (die attachment process), Keith Chew
- Re: AW: urgent help regarding contact surface (die attachment process), Keith Chew
  - Re: AW: urgent help regarding contact surface (die attachment process), Keith Chew
- Re: AW: urgent help regarding contact surface (die attachment process), Keith Chew
urgent help regarding contact surface (die attachment process), barnes_kc
procedure execution for abaqus 6.4.1 on windows, Geralf Pineda Hernández
the difference between element-based surface and node_based surface!, Tiger
- Re: Re: the difference between element-based surface and node_based surface!, Tiger
Year 2004 Abaqus user conference meeting, Liang, Shaomin
- RE: Year 2004 Abaqus user conference meeting, Roger Keene
Add lines (edges) / mesh to mesh, Geralf Pineda Hernández
UMAT for finite strains, iwtm16
- Re: UMAT for finite strains, BenZ
  - Re: UMAT for finite strains, iwtm16
    - Re: UMAT for finite strains, BenZ
  - Re: UMAT for finite strains, meyh2002
    - Re: UMAT for finite strains, BenZ
Gray Cast Iron - Material props, acafilip
Map Solution, Geralf Pineda Hernández
- RE: Map Solution, Robert Henderson
- Map solution, Geralf Pineda Hernández
- Map solution, Geralf Pineda Hernández
frictional sliding between components in Abaqus., Mongi
Modeling wire and pulley, Kim, Yooil
- Re: Modeling wire and pulley, Vishwanath S
Cyclic softening, Kim, Yooil
Problem with convergence., ravindran_manoharan
- X-Y PLot Sum of RF vs U, Ovunc Mutlu
- Re: Problem with convergence., amarendraatre
Including subroutines using CAE, trkarthik
- Re: Including subroutines using CAE, harsha makkapati
  - Re: Including subroutines using CAE, Shiladitya Basu
- Re: Including subroutines using CAE, MOHAMMED ELIAS
  - Re: Including subroutines using CAE, trkarthik
Help for Contact (Sandeep)], Sandeep S. Pendhari
Load dependant stiffness, ravindran_manoharan
Transfer and interpolation of results in Explicit, zaghbani_imed
help on nonlinear spring, Narcis
- Skin, Christine El-Lahham
Super element, juandgomez
Problem w/ multiple connectors, rolangarcia
Tire Modelling, Ananth
- Re: Tire Modelling, Finite Element Analysis
Fw: Visualizing with UEL- reposting, hariton
Solder ball Creep model subroutine, Liang, Shaomin
RE: help on Abaqus, Liang, Shaomin
- Re: help on Abaqus, Hongyu Sun
Re: How to construct a 3D geometry from 2D images, Hongyu Sun
Gasket elements without thickness, Gonzalez, Diego
Help for Contact (Sandeep), Sandeep S. Pendhari
Determination of load by axial preload, abdulhashim
- RE: Determination of load by axial preload, Sridharan
  - Re: Determination of load by axial preload, abdulhashim
Combined Hardening for Aluminium 2024-T351 Alloy, Jeffrey Meng Lee Tan
cutting modelling, Philippe Moreau
- Re: cutting modelling, BARGE Matthieu
Hourglasing in Single & Double precision?, nandor_mago
Partitions and post-processing, Jason Parham
- Re: Partitions and post-processing, minghui_ub
  - Re: Partitions and post-processing, Jason Parham
    - Re: Re: Partitions and post-processing, minghui_ub
How to compile Fortran under ABAQUS, David Loke
Re: Re: Help Please in Contact problems, munir nazzal
material properties and fixed boundaries, Kristy Brock-Leatherman
Re: Hiperelasticity, Russell Moerland
- Re: Re: Hiperelasticity, Geralf Pineda
- Re: Hiperelasticity, Russell Moerland
Help required : Abaqus interference, Hashim A
Help required in modeliing interference, Hashim A
Specifying initial void ratio in Abaqus CAE, trkarthik
- Re: Specifying initial void ratio in Abaqus CAE, Guillermo A. Narsilio
- Re: Specifying initial void ratio in Abaqus CAE, pj mcallen
  - Re: Specifying initial void ratio in Abaqus CAE, 12locken
    - Re: Specifying initial void ratio in Abaqus CAE, trkarthik
Superpose material models, paulvaneeten1
- Re: Superpose material models, Kim, Yooil
- SV: Superpose material models, Paul Van Eeten
AW: question about 'restart', Brenner, Achim
Re: Python scripting: FieldOutputs in Odbs, Sridhar R Setty
- RE: Python scripting: FieldOutputs in Odbs, (fabri) done ugarte
RE: question about 'restart', Sridharan
Re: Catia2abaqus, marchello_si
Re: How to check the Licencses in use, Cheng-Kong Wu
- Re: How to check the Licencses in use, Behzad Fatahi
- Re: How to check the Licencses in use, Bronch Plemenitas
  - Re: How to check the Licencses in use, Jon Crookston
    - Re: Re: How to check the Licencses in use, vaibhav ekbote
  - Re: How to check the Licencses in use, vaibhav ekbote
- RE: How to check the Licencses in use, Sridharan
Contact surfaces between different instances, Jason Parham
- Re: Contact surfaces between different instances, Ravindran Manoharan
  - Re: Contact surfaces between different instances, Jason Parham
    - DEBOND, Ovunc Mutlu
    - Re: DEBOND, Zaghbani Imed
    - Re: Contact surfaces between different instances, trkarthik
    - Re: Contact surfaces between different instances, Jason Parham
    - Re: Re: Contact surfaces between different instances, Amir Siddiq
Re: Remeshing on ABAQUS/standard, pj mcallen